Dies and Thread Chasers

Thread Chasers = Designated for specific die heads to create new threads from bar stock. Used in automatic or manual operations, mounted in a fixed, stationary position in a turret or tool holder.

Threading or Re-threading Dies

High Speed Steel to create a new thread - Fall Under the threading category

Carbon Steel to chase/cleanup an existing thread - These would be in the re-threading category
Sort By:  
chaser 6-32 9-16d
Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$22.00
chaser 3/8-16 9-16d
Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$22.00
chaser 1/2-16 1D
Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$28.00
chaser 3/4-27 1D
Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$28.00
chaser 1-9 1D
Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$28.00
chaser 3/4-14 NPS LH 1D
Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$34.00
chaser 12-24 100 h g
100 Series Chasers will fit 101, 102 and 103 series die heads. Used with Carriers that hold the chaser in place. The range of the carrier allows threads of different diameters to be cut.
$22.00
chaser 11/16-24 100 h g
100 Series Chasers will fit 101, 102 and 103 series die heads. Used with Carriers that hold the chaser in place. The range of the carrier allows threads of different diameters to be cut.
$28.00
chaser 1-20 100 h g
100 Series Chasers will fit 101, 102 and 103 series die heads. Used with Carriers that hold the chaser in place. The range of the carrier allows threads of different diameters to be cut.
$28.00
chaser 1/2-14nps 100 h g
100 Series Chasers will fit 101, 102 and 103 series die heads. Used with Carriers that hold the chaser in place. The range of the carrier allows threads of different diameters to be cut.
$24.00
chaser 1/2-14nptf 100 h g
100 Series Chasers will fit 101, 102 and 103 series die heads. Used with Carriers that hold the chaser in place. The range of the carrier allows threads of different diameters to be cut.
$24.00
die 4-40 rd adjt jpn
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$3.50
die 4-40 hex usa
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 6-32 rd adj imp
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 6-32 rd adj usa
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 6-32 rd adj btc LH
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$3.25
die 6-32 rd adj jpn LH
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$5.50
die 10-24 rd adj crbn btc
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 10-24 rd adj hss plnd
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$3.25
die 10-24 rd adj 1 inch od btc
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 10-24 rd adj 1 inch od rbc
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 10-24 hex die mlfrd
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 10-32 rd adj btc
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 10-32 rd adj rbc
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 12-24 rd adj tngn
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 12-24 rd adj milford
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 12-24 rd adj lh jpn
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$5.50
die 3/16-32 hex mlfrd
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$5.50
die 1/4-28 rd adj btc
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 1/4-28 hex std
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 5/16-18 rd unknwn
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 5/16-24 hex std
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 5/16-24 hex mlfrd
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 3/8-16 LH JPN
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$7.75
die 7/16-14 LH JPN
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$7.75
die set 10pc vrmnt 5816
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$22.00
chaser 6-32 9-16d
Thread Chaser 6-32 9/16 Inch D Head 4 pc Set High Speed Steel Geometric (Thread Chaser)

Size and Pitch = 6-32

Head Size = 9/16" D

Chamfer = 22 Degree

Hook = 10 Degree

Chasers are High speed Steel - Right Hand Cutting

Fit any 9/16"D Geometric Style Head

Price is for 4 pc set

Part Number = NB75-10860

Manufacturer = Geometric / U.S.A.

Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$22.00
chaser 3/8-16 9-16d
Thread Chaser 3/8-16 9/16 Inch D Head 4 pc Set High Speed Steel Geometric (Thread Chaser)

Size and Pitch = 3/8-16

Head Size = 9/16" D

Chamfer = 22 Degree

Hook = 10 Degree

Chasers are High speed Steel - Right Hand Cutting

Fit any 9/16"D Geometric Style Head

Price is for 4 pc set

Part Number = NB75-52083

Manufacturer = Geometric / U.S.A.

Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$22.00
chaser 1/2-16 1D
Thread Chaser 1/2-16 1 Inch D Head 4 pc Set High Speed Steel Geometric (Thread Chaser)

Size and Pitch = 1/2-16

Head Size = 1" D

Chamfer = 22 Degree

Hook = 10 Degree

Chasers are High speed Steel - Right Hand Cutting

Fit any 1"D Geometric Style Head

Price is for 4 pc set

Part Number = NB75-111-B

Manufacturer = Geometric / U.S.A.

Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$28.00
chaser 3/4-27 1D
Thread Chaser 3/4-27 1 Inch D Head 4 pc Set High Speed Steel Geometric (Thread Chaser)

Size and Pitch = 3/4-27

Head Size = 1" D

Chamfer = 45 Degree

Hook = 10 Degree

Chasers are High speed Steel - Right Hand Cutting

Fit any 1"D Geometric Style Head

Price is for 4 pc set

Part Number = NB75-AA66

Manufacturer = Geometric / U.S.A.

Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$28.00
chaser 1-9 1D
Thread Chaser 1-9 1 Inch D Head 4 pc Set High Speed Steel Geometric (Thread Chaser)

Size and Pitch = 1-9

Head Size = 1" D

Chamfer = 22 Degree

Hook = 10 Degree

Chasers are High speed Steel - Right Hand Cutting

Fit any 1"D Geometric Style Head

Price is for 4 pc set

Part Number = NB75-111R

Manufacturer = Geometric / U.S.A.

Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$28.00
chaser 3/4-14 NPS LH 1D
Thread Chaser 3/4-14NPS Pipe Left Hand 1 Inch D Head 4 pc Set High Speed Steel Geometric (Thread Chaser)

Size and Pitch = 3/4-14NPS {Straight Pipe}

Head Size = 1" D

Chamfer = 45 Degree

Hook = 10 Degree

Chasers are High speed Steel - LEFT Hand Cutting

Fit any 1"D Geometric Style Head

Price is for 4 pc set

Part Number = NB75-A55

Manufacturer = Geometric / U.S.A.

Quality chasers for Geometric style die heads are available in several configurations. The cutting edge grinds or hook angles vary depending upon the type of material that the chaser will cut. ... The standard chamfer angle is 33° on regular style chasers and 45° on projection style.
$34.00
chaser 12-24 100 h g
Thread Chaser 12-24 H and G 100 Series 4 pc Set High Speed Steel Cleveland Twist (Thread Chaser)

Size and Pitch = 12-24

Head Size = H&G Series 100

Chamfer = 40 Degree

Hook = 10 Degree

Chasers are High speed Steel - Right Hand Cutting

Fit any H&G 100 Series Style Head

Price is for 4 pc set

Part Number = NB-75 5-1014-1224-30

Manufacturer = Cleveland Twist Drill / U.S.A.

100 Series Chasers will fit 101, 102 and 103 series die heads. Used with Carriers that hold the chaser in place. The range of the carrier allows threads of different diameters to be cut.
$22.00
chaser 11/16-24 100 h g
Thread Chaser 11/16-24 H and G 100 Series 4 pc Set High Speed Steel Cleveland Twist (Thread Chaser)

Size and Pitch = 11/16-24

Head Size = H&G Series 100

Chamfer = 20 Degree

Hook = 15 Degree

Chasers are High speed Steel - Right Hand Cutting

Fit any H&G 100 Series Style Head

Price is for 4 pc set

Part Number = NB-75 5-1014-4224-10

Manufacturer = Cleveland Twist Drill / U.S.A.

100 Series Chasers will fit 101, 102 and 103 series die heads. Used with Carriers that hold the chaser in place. The range of the carrier allows threads of different diameters to be cut.
$28.00
chaser 1-20 100 h g
Thread Chaser 1-20 H and G 100 Series 4 pc Set High Speed Steel Regal Beloit (Thread Chaser)

Size and Pitch = 1-20

Head Size = H&G Series 100

Chamfer = 40 Degree

Hook = 10 Degree

Chasers are High speed Steel - Right Hand Cutting

Fit any H&G 100 Series Style Head

Price is for 4 pc set

Part Number = NB-75 100-1-20

Manufacturer =Regal Beloit / U.S.A.

100 Series Chasers will fit 101, 102 and 103 series die heads. Used with Carriers that hold the chaser in place. The range of the carrier allows threads of different diameters to be cut.
$28.00
chaser 1/2-14nps 100 h g
Thread Chaser 1/2-14NPS H and G 100 Series 4 pc Set High Speed Steel Cleveland Twist (Thread Chaser)

Size and Pitch = 1/2-14 NPS {Straight Pipe}

Head Size = H&G Series 100

Chamfer = 30 Degree

Hook = 15 Degree

Chasers are High speed Steel - Right Hand Cutting

Fit any H&G 100 Series Style Head

Price is for 4 pc set

Part Number = NB-75 5-1014-3602-20

Manufacturer =Cleveland Twist / U.S.A.

100 Series Chasers will fit 101, 102 and 103 series die heads. Used with Carriers that hold the chaser in place. The range of the carrier allows threads of different diameters to be cut.
$24.00
chaser 1/2-14nptf 100 h g
Thread Chaser 1/2-14NPTF H and G 100 Series 4 pc Set High Speed Steel Cleveland Twist (Thread Chaser)

Size and Pitch = 1/2-14 NPTF {Taper Dryseal Pipe}

Head Size = H&G Series 100

Chamfer = 40 Degree

Hook = 5 Degree -Negative

Chasers are High speed Steel - Right Hand Cutting

Fit any H&G 100 Series Style Head

Price is for 4 pc set

Part Number = NB-75 82753

Manufacturer =Cleveland Twist / U.S.A.

100 Series Chasers will fit 101, 102 and 103 series die heads. Used with Carriers that hold the chaser in place. The range of the carrier allows threads of different diameters to be cut.
$24.00
die 4-40 rd adjt jpn
Round Adjustable Threading Die 4-40 x 13/16 OD High Speed Steel Japan (Threading Die)

Size and Pitch = 4-40

Outside Diameter and Style = 13/16" Round Adjustable

High Speed Steel

Right Hand Cutting

Manufacturer = Made in Japan on die proper

Part Number = RAD-010
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$3.50
die 4-40 hex usa
Hex Rethreading Die 4-40 x 1" Across flats Carbon Steel USA (Threading Die)

Size and Pitch = 4-40

Distance across Flats and Style = 1" - Hex Shape

Carbon Steel - Re threading

Right Hand Cutting

Manufacturer = Milford U.S.A.

Part Number =NB-75 95680
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 6-32 rd adj imp
Round Adjustable Rethreading Die 6-32 x 13/16" OD Carbon Steel Import (Threading Die)

Size and Pitch = 6-32

Outside Diameter = 13/16" - Round Adjustable Split

Carbon Steel - Re threading

Right Hand Cutting

Manufacturer = Italy

Part Number =NB-75 632
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 6-32 rd adj usa
Round Rethreading Die 6-32 x 1" OD Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 6-32

Outside Diameter = 1" - Round This Diameter is fixed {not split}

Carbon Steel - Re threading

Right Hand Cutting

Manufacturer = Columbia

Part Number =NB-75 6-32 49724
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 6-32 rd adj btc LH
Round Adjustable Rethreading Die 6-32 x 13/16" OD Left Hand Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 6-32

Outside Diameter = 13/16" - Round Adjustable Split

Carbon Steel - Re threading

Left Hand Cutting

Manufacturer = BTC = Brubaker Tool Corp

Part Number =NB-75 632LH-13/16BTC

These have a bit of surface rust - Threads are clean

High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$3.25
die 6-32 rd adj jpn LH
Round Adjustable threading Die 6-32 x 1" OD Left Hand High Speed Steel Japan (Threading Die)

Size and Pitch = 6-32

Outside Diameter = 1" - Round Adjustable Split

High Speed Steel - Threading

Left Hand Cutting

Manufacturer = Japan

Part Number =NB-75 632LH-1JPN
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$5.50
die 10-24 rd adj crbn btc
Round Adjustable Re-Threading Die 10-24 x 13/16" OD Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 10-24

Outside Diameter = 13/16" - Round Adjustable Split

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = BTC

Part Number =NB-75 10-24BTC

Bit of surface rust on body - Threads are clean

High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 10-24 rd adj hss plnd
Round Adjustable Threading Die 10-24 x 13/16" OD High Speed Steel Import (Threading Die)

Size and Pitch = 10-24

Outside Diameter = 13/16" - Round Adjustable Split

High Speed Steel - Threading

Right Hand Cutting

Manufacturer = Poland

Part Number = RAD-016 NB75-116F
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$3.25
die 10-24 rd adj 1 inch od btc
Round Adjustable Re-Threading Die 10-24 x 1" OD Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 10-24

Outside Diameter = 1" - Round Adjustable Split

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = BTC

Part Number = NB-75 1024-BTC

Bit of surface rust on body - Threads are clean

High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 10-24 rd adj 1 inch od rbc
Round Adjustable Re-Threading Die 10-24 x 1" OD Carbon Steel Import (Threading Die)

Size and Pitch = 10-24

Outside Diameter = 1" - Round Adjustable Split

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Italy

Part Number = NB-75 1024-RBC
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 10-24 hex die mlfrd
Hex Shape Re-Threading Die 10-24 Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 10-24

Distance across Flats = 1.000"

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Milford

Part Number = NB-75 95689
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 10-32 rd adj btc
Round Adjustable Re-Threading Die 10-32 x 1 Inch OD Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 10-32

Diameter = 1" - Round Adjustable Split

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = BTC

Part Number = NB-75 1032BTC

Little Bit surface rust - Threads are clean

High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 10-32 rd adj rbc
Round Adjustable Re-Threading Die 10-32 x 1 Inch OD Carbon Steel Import (Threading Die)

Size and Pitch = 10-32

Diameter = 1" - Round Adjustable Split

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Italy

Part Number = NB-75 1032RBC
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 12-24 rd adj tngn
Round Adjustable Re-Threading Die 12-24 x 1 Inch OD Carbon Steel Unknown (Threading Die)

Size and Pitch = 12-24

Diameter = 1" - Round Adjustable Split

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Marked Tungsten on Die

Part Number = NB-75 1224TNGN
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 12-24 rd adj milford
Hex Shape Re-Threading Die 12-24 Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 12-24

Distance across flats = 1"

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Milford

Part Number = NB-75 90695
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.75
die 12-24 rd adj lh jpn
Round Adjustable Threading Die 12-24 x 1 Inch OD Left Hand High Speed Steel Import (Threading Die)

Size and Pitch = 12-24

Diameter = 1" - Round Adjustable Split

High Speed Steel - Threading

Left Hand Cutting

Manufacturer = Japan

Part Number = NB-75 1224LHJ
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$5.50
die 3/16-32 hex mlfrd
Hex Shape Re-Threading Die 3/16-32 x 1 Inch Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 3/16-32

Hex Shape = 1" Distance across Flats

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Milford

Part Number = NB-75 95706
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$5.50
die 1/4-28 rd adj btc
Round Adjustable Re-Threading Die 1/4-28 x 13/16 OD Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 1/4-28

Diameter = 13/16"

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = BTC

Part Number = NB-75 251 BTC
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 1/4-28 hex std
Hex Shape Re-Threading Die 1/4-28 x 19/32 Diameter Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 1/4-28

Distance across Flats = 19/32" {.593"}

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Standard Tool

Part Number = NB-75 87402
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 5/16-18 rd unknwn
Round Adjustable Re-Threading Die 5/16-18 x 13/16 OD Carbon Steel Unknown (Threading Die)

Size and Pitch = 5/16-18

Diameter = 13/16" Round Adjustable Split

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Unknown

Part Number = NB-75 RAD-020-812

surface rust - Threads Are Clean

High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 5/16-24 hex std
Hex Shape Re-Threading Die 5/16-24 x .685 Inch Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 5/16-24

Distance across Flats = .685"

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Standard Tool

Part Number = NB-75 87404
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 5/16-24 hex mlfrd
Hex Shape Re-Threading Die 5/16-24 x 1 Inch Carbon Steel U.S.A. (Threading Die)

Size and Pitch = 5/16-24

Distance across Flats = 1.000"

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Milford

Part Number = NB-75 MIL-022-100

Bit of Surface Rust - Threads are clean

High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$2.50
die 3/8-16 LH JPN
Round Adjustable Threading Die 3/8-16 x 1-1/2 Inch OD Left Hand High Speed Steel Import (Threading Die)

Size and Pitch = 3/8-16

Diameter = 1-1/2" Round Adjustable Split

High Speed Steel - Threading

Left Hand Cutting

Manufacturer = Japan

Part Number = NB-75 024LHJ

Little Bit surface rust - Threads are CLean

High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$7.75
die 7/16-14 LH JPN
Round Adjustable Threading Die 7/16-14 x 1-1/2 Inch OD Left Hand High Speed Steel Import (Threading Die)

Size and Pitch = 7/16-14

Diameter = 1-1/2" Round Adjustable Split

High Speed Steel - Threading

Left Hand Cutting

Manufacturer = Japan

Part Number = NB-75 028LHJ

Little Bit surface rust - Threads are CLean

High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$7.75
die set 10pc vrmnt 5816
Hex Shape Re-Threading Die Set 10 pcs 1/4-1/2 Inch Carbon Steel In Plastic Case U.S.A. (Threading Die)
1 piece each coarse and fine Standard S.A.E. 10 pieces total

Size and Pitch = 1/4-20 & 1/4-28 Distance across Flats = .425"

Size and Pitch = 5/16-18 & 5/16-24 Distance across Flats = .495"

Size and Pitch = 3/8-16 & 3/8-24 Distance across Flats = .555"

Size and Pitch = 7/16-14 & 7/16-20 Distance across Flats = .680"

Size and Pitch = 1/2-13 & 1/2-20 Distance across Flats = .735"

Carbon Steel - Re-Threading

Right Hand Cutting

Manufacturer = Vermont

The case is OK - Medium duty Plastic and should hold up nice kicking around in Your toolbox -where the Dies sit the fit is nice - Cover is not to impressive - You may need a rubber band eventually cause the plastic clasp most likely wont hold up over a long period of time - The black Oxide are Fine Thread and the Bright are Coarse Thread

Part Number = NB-75 5816 VRMNT
High Speed Steel - For creating new threads, You can chase an existing thread with this parent material as well. Carbon Steel - Used for chasing/cleaning up an existing thread.
$22.00
Per Page      1 - 36 of 36
  • 1