Nachi Series 6595P Fractional Sizes Fine Melted High Speed Steel

Made from New HSS (FM-HSS: Fine melting HSS) with Composite. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt . 38 Degree Parabolic Helix Design

Multi-Layer AG Coating (TiAIN)

Utilizes a high accuracy shape of lip relief (3 rake thinning)

Drilling Depth Effectiveness 3xD Not Greater Than 7xD

End mill style shanks for highly precise and accurate drilling

First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc,

Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}

Sort By:  
jld nch 6595p 7/64
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$3.00
jld nch 6595p 5/32
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$3.75
jld nch 6595p 11/64
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$4.00
jld nch 6595p 3/16
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$4.00
jld nch 6595p 7/32
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$5.25
jld nch 6595p 15/64
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$5.75
jld nch 6595p 1/4
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$5.75
jld nch 6595p 17/64
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$6.75
jld nch 6595p 19/64
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$7.50
jld nch 6595p 5/16
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$9.50
jld nch 6595p 21/64
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$9.50
jld nch 6595p 3/8
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$12.75
jld nch 6595p 25/64
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$14.00
jld nch 6595p 27/64
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$15.00
jld nch 6595p 7/16
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$15.00
jld nch 6595p 15/32
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$16.00
jld nch 6595p 31/64
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$18.00
jld nch 6595p 1/2
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$18.00
jld nch 6595p 37/64
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$42.00
jld nch 6595p 19/32
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$42.00
jld nch 6595 5/8
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$48.00
jld nch 6595 23/32
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$55.00
jld nch 6595 3/4
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$58.00
jld nch 6595p 7/64
Parabolic Drill Bit 7/64" {.1094"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =7/64" {.1094"}

Flute Length = 1-1/4"

Overall Length = 2-1/2"

Shank Diameter = 1/8" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-007 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$3.00
jld nch 6595p 5/32
Parabolic Drill Bit 5/32" {.1562"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =5/32" {.1562"}

Flute Length = 1-3/4"

Overall Length = 3-1/8"

Shank Diameter = 3/16" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-010 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$3.75
jld nch 6595p 11/64
Parabolic Drill Bit 11/64" {.1719"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =11/64" {.1719"}

Flute Length = 1-7/8"

Overall Length = 3-1/4"

Shank Diameter = 3/16" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-011 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$4.00
jld nch 6595p 3/16
Parabolic Drill Bit 3/16" {.1875"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =3/16" {.1875"}

Flute Length = 2"

Overall Length = 3-3/8"

Shank Diameter = 3/16" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-012 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$4.00
jld nch 6595p 7/32
Parabolic Drill Bit 7/32" {.2188"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =7/32" {.1875"}

Flute Length = 2-1/16"

Overall Length = 3-7/8"

Shank Diameter = 1/4" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-014 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$5.25
jld nch 6595p 15/64
Parabolic Drill Bit 15/64" {.2344"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =15/64" {.2344"}

Flute Length = 2-3/8"

Overall Length = 4-1/4"

Shank Diameter = 1/4" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-015 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$5.75
jld nch 6595p 1/4
Parabolic Drill Bit 1/4" {.250"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =1/4" {.2500"}

Flute Length = 2-3/8"

Overall Length = 4-1/4"

Shank Diameter = 1/4" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-016 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$5.75
jld nch 6595p 17/64
Parabolic Drill Bit 17/64" {.2656"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =17/64" {.2656"}

Flute Length = 2-3/4"

Overall Length = 4-5/8"

Shank Diameter = 3/8" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-017 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$6.75
jld nch 6595p 19/64
Parabolic Drill Bit 19/64" {.2969"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =19/64" {.2969"}

Flute Length = 2-7/8"

Overall Length = 4-3/4"

Shank Diameter = 3/8" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-019 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$7.50
jld nch 6595p 5/16
Parabolic Drill Bit 5/16" {.3125"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =5/16" {.3125"} Tap Drill for 3/8-16 Cut Tap

Flute Length = 2-7/8"

Overall Length = 4-3/4"

Shank Diameter = 3/8" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-020 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$9.50
jld nch 6595p 21/64
Parabolic Drill Bit 21/64" {.3281"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =21/64" {.3281"} Tap/Drill For 5/16-24 STI {Heli-Coil}

Flute Length = 2-7/8"

Overall Length = 4-3/4"

Shank Diameter = 3/8" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-021 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$9.50
jld nch 6595p 3/8
Parabolic Drill Bit 3/8" {.375"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =3/8" {.3750"}

Flute Length = 3-1/4"

Overall Length = 5-1/8"

Shank Diameter = 3/8" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-024 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$12.75
jld nch 6595p 25/64
Parabolic Drill Bit 25/64" {.3906"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =25/64" {.3906"} Tap/Drill for 3/8-24 STI {Heli-Coil}

Flute Length = 3-3/8"

Overall Length = 5-1/2"

Shank Diameter = 1/2" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-025 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$14.00
jld nch 6595p 27/64
Parabolic Drill Bit 27/64" {.4219"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =27/64" {.4219"} Tap/Drill For 1/2-13 Cut Tap

Flute Length = 3-3/4

Overall Length = 5-7/8"

Shank Diameter = 1/2" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-027 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$15.00
jld nch 6595p 7/16
Parabolic Drill Bit 7/16" {.4375"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =7/16" {.4375"} Tap/Drill For 1/4-18 NPT/NPTF Cut Tap

Flute Length = 3-3/4

Overall Length = 5-7/8"

Shank Diameter = 1/2" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-028 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$15.00
jld nch 6595p 15/32
Parabolic Drill Bit 15/32" {.4688"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =15/32" {.4688"}

Flute Length = 4

Overall Length = 6-1/4"

Shank Diameter = 1/2" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-030 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$16.00
jld nch 6595p 31/64
Parabolic Drill Bit 31/64" {.4844"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =31/64" {.4844"} Tap Drill 9/16-12 Cut Tap

Flute Length = 4

Overall Length = 6-1/4"

Shank Diameter = 1/2" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-031 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$18.00
jld nch 6595p 1/2
Parabolic Drill Bit 1/2" {.500"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =1/2" {.5000"}

Flute Length = 4

Overall Length = 6-1/4"

Shank Diameter = 1/2" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-032 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$18.00
jld nch 6595p 37/64
Parabolic Drill Bit 37/64" {.5781"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =37/64" {.5781"} Tap Drill 5/8-18 Cut Tap 3/8-18 NPT Pipe tap 3/8-18 NPSF Straight Dryseal Pipe Tap

Flute Length = 4-1/2

Overall Length = 7"

Shank Diameter = 5/8" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-037 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$42.00
jld nch 6595p 19/32
Parabolic Drill Bit 19/32" {.5938"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =19/32" {.5938"} Tap Drill 3/8-18 NPS Straight Pipe Tap

Flute Length = 4-3/4"

Overall Length = 7-1/4"

Shank Diameter = 3/4" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-038 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$42.00
jld nch 6595 5/8
Parabolic Drill Bit 5/8" {.625"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =5/8" {.6250"}

Flute Length = 4-3/4"

Overall Length = 7-1/4"

Shank Diameter = 3/4" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-040 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$48.00
jld nch 6595 23/32
Parabolic Drill Bit 23/32" {.7188"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =23/32" {.7188"} Tap Drill 1/2-14NPT Pipe 3/4-16 Threadform Tap

Flute Length = 5-3/8"

Overall Length = 7-3/4"

Shank Diameter = 7/8" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-046 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$55.00
jld nch 6595 3/4
Parabolic Drill Bit 3/4" {.750"} Diameter FMX Fine Metal High Speed Steel Tialn Coated Nachi (Drill Bit Nachi Series 6595P Fractional)

Drill Diameter =3/4" {.7500"}

Flute Length = 5-1/2"

Overall Length = 7-7/8"

Shank Diameter = 7/8" {Common shank to accommodate standard collets and V flange holders}

Drill Point = 135 Degree Split

Coating = AG/TIALN

FMX - Fine Metal High Speed Steel with Composite

38 Degree Parabolic Flute Design

P/N = NCH-6595P-048 AGSUSDR

Drills are marked on shank Mfg, Size, In original Manufacturer's packaging. ETC
First Choice / Extremely effective On : Low Carbon Steel 1010, 1018, High Carbon Steel 1045, Austenitic Stainless Steels 300 Series , Martensitic Stainless Steels 400 Series, Ferritic Stainless Steels, Alloy Steel 4140, 4330, Structural Steels, 1065, Hardened Steel Up to 35rc, . Secondary Good choice : Titanium and Nickels alloys, Aluminum T6061 & 7075, Aluminum casting <12% Silica, Copper Alloys. Higher Heat, Wear and Toughness Resistance Than conventional High Speed Cobalt .
$58.00
Per Page      1 - 23 of 23
  • 1