Oversize +.005" Hand and Spiral Point Style

Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.

Right Hand Cutting

Ground Threads

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}

We have listed these oversize taps specifically as Manufacturer{s} have marked on tap. Some have marked +.005"/others GH11/and even a few have GH10
Sort By:  
tap oversize 4-40 thrdfrm widel
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$3.75
tap oversize 6-32 mct
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$3.75
tap oversize 8-32 mct
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$3.75
tap oversize 10-24 gtd
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$3.50
tap oversize 10-24 ctd
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$3.00
tap oversize 10-32 osg
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$4.00
tap oversize 1/4-28 tin vtp
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$4.50
tap oversize 5/16-24 r&N
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$5.00
tap oversize 5/16-24 tin knmtl
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$5.50
tap oversize 5/16-24 thrdfrm ntd
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$4.50
tap oversize 7/16-20 btm r&N
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$6.75
tap oversize 7/16-20 sp pt r&n
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$7.75
tap oversize 7/16-20 sp fl netco
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$8.75
tap oversize 3/4-16 RBC
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$34.80
tap oversize 7/8-9 na
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$36.00
tap oversize 1-8 thrdfrm jarvis
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$44.00
tap oversize M8x1.25 thrdfrm besly
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$6.25
tap oversize 4-40 thrdfrm widel
Oversize Tap Threadforming 4-40 +.005 Bottom Lead High Speed Steel Uncoated Widell (Oversize Tap)

Diameter and Pitch = 4-40

Lead = Bottom {1-2 Thread Lead}

H Limit = +.005

Number of Flutes = Thread forming style No Coolant grooves

Right Hand Cutting

Coating = Uncoated

Ground Threads

Manufacturer = Widell

P/N NB-75 815-018

Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$3.75
tap oversize 6-32 mct
Oversize Tap 6-32 +.005 Spiral Point Plug Lead High Speed Steel Uncoated Morse (Oversize Tap)

Diameter and Pitch = 6-32

Lead = Spiral Point Plug {Chip driver} {3-5 Thread Lead}

H Limit = +.005

Number of Flutes = 2

Right Hand Cutting

Coating = Uncoated {Bright}

Ground Threads

Manufacturer = Morse

P/N 801-024ov

Packed 12 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$3.75
tap oversize 8-32 mct
Oversize Tap 8-32 +.005 Spiral Point Plug Lead High Speed Steel Uncoated Morse (Oversize Tap)

Diameter and Pitch = 6-32

Lead = Spiral Point Plug {Chip driver} {3-5 Thread Lead}

H Limit = GH11

Number of Flutes = 2

Right Hand Cutting

Coating = Uncoated {Bright}

Ground Threads

Manufacturer = Morse

P/N 801-028ov

Packed 12 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$3.75
tap oversize 10-24 gtd
Oversize Tap 10-24 +.005 Hand Plug Lead High Speed Steel Tin Coated Greenfield (Oversize Tap)

Diameter and Pitch = 10-24

Lead = Hand Plug {3-5 Thread Lead}

H Limit = +.005

Number of Flutes = 2

Right Hand Cutting

Coating = TIN

Ground Threads

Manufacturer = Greenfield

P/N NB-75 801-032ov GTD-582354

Packed 12 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$3.50
tap oversize 10-24 ctd
Oversize Tap 10-24 +.005 Hand Plug Lead High Speed Steel Uncoated Cleveland Twist Drill (Oversize Tap)

Diameter and Pitch = 10-24

Lead = Hand Plug {3-5 Thread Lead}

H Limit = GH11

Number of Flutes = 4

Right Hand Cutting

Coating = Uncoated {Bright}

Ground Threads

Manufacturer = Cleveland Twist Drill

P/N NB-75 801-032ov CTD-C60138

Packed 12 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$3.00
tap oversize 10-32 osg
Oversize Tap 10-32 +.005 Spiral Point Plug Lead Vanadium High Speed Steel Black Oxide OSG (Oversize Tap)

Diameter and Pitch = 10-32

Lead = Spiral Point Plug {3-5 Thread Lead}

H Limit = GH10

Number of Flutes = 3

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Manufacturer = OSG

P/N NB-75 801-034ov OSG-19962550

Packed 3 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$4.00
tap oversize 1/4-28 tin vtp
Oversize Tap 1/4-28 +.005 Spiral Point Bottom Lead High Speed Steel Tin Coated Vermont/This one is GH9 (Oversize Tap)

Diameter and Pitch = 1/4-28

Lead = Spiral Point Bottom {1-2 Thread Lead}

H Limit = GH9

Number of Flutes = 3

Right Hand Cutting

Coating = TIN

Ground Threads

Manufacturer = Vermont

P/N NB-75 801-040ov VTP-1104242340

Packed 12 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$4.50
tap oversize 5/16-24 r&N
Oversize Tap 5/16-24 +.005 Spiral Point Plug Lead High Speed Steel Uncoated Reiff & Nestor (Oversize Tap)

Diameter and Pitch = 5/16-24

Lead = Spiral Point Plug {3-5 Thread Lead}

H Limit = GH11

Number of Flutes = 3

Right Hand Cutting

Coating = Uncoated {Bright}

Ground Threads

Manufacturer = Reiff & Nestor

P/N 801-046ov

Packed 12 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$5.00
tap oversize 5/16-24 tin knmtl
Oversize Tap 5/16-24 +.005 Spiral Point Plug Lead Vanadium High Speed Steel Tin Coated Kennametal/This one is GH13 (Oversize Tap)

Diameter and Pitch = 5/16-24

Lead = Spiral Point Plug {3-5 Thread Lead}

H Limit = GH13

Number of Flutes = 3

Right Hand Cutting

Coating = TIN

Ground Threads

Manufacturer = Kennametal

P/N 801-046HP OS

Packed 3 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$5.50
tap oversize 5/16-24 thrdfrm ntd
Oversize Tap 5/16-24 +.005 Thread forming Plug Lead High Speed Steel Uncoated U.S.A. (Oversize Tap)

Diameter and Pitch = 5/16-24

Lead = Plug {3-5 Thread Lead}

H Limit = GH10

Number of Flutes = Thread forming No Coolant Grooves

Right Hand Cutting

Coating = Uncoated {Bright}

Ground Threads

Manufacturer = National Twist Drill

P/N NB-75 801-048 NTD 77984

Packed 12 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$4.50
tap oversize 7/16-20 btm r&N
Oversize Tap 7/16-20 +.005 Hand Bottom Lead High Speed Steel Uncoated Reiff&Nestor (Oversize Tap)

Diameter and Pitch = 7/16-20

Lead = Hand Bottom {1-2 Thread Lead}

H Limit = GH11

Number of Flutes = 4

Right Hand Cutting

Coating = Uncoated {Bright}

Ground Threads

Manufacturer = Reiff&Nestor

P/N 808-054ov R&N200426

Packed 12 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$6.75
tap oversize 7/16-20 sp pt r&n
Oversize Tap 7/16-20 +.005 Spiral Point Plug Lead High Speed Steel Uncoated Reiff&Nestor (Oversize Tap)

Diameter and Pitch = 7/16-20

Lead = Spiral Point Plug {3-5 Thread Lead}

H Limit = GH11

Number of Flutes = 3

Right Hand Cutting

Coating = Uncoated {Bright}

Ground Threads

Manufacturer = Reiff&Nestor

P/N 801-054 ov

Packed 12 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$7.75
tap oversize 7/16-20 sp fl netco
Oversize Tap 7/16-20 +.005 Spiral Flute Plug Lead High Speed Steel Chrome Coated NETCO U.S.A. (Oversize Tap)

Diameter and Pitch = 7/16-20

Lead = Spiral Flute Plug {3-5 Thread Lead}

H Limit = +.005

Number of Flutes = 4 Which have a 52 Degree Helix

Right Hand Cutting

Coating = Chrome Coated

Ground Threads

Manufacturer = New England Tap Company

P/N 803-054 OV

Out of Original Manufacturer's packaging all markings on Tap shank
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$8.75
tap oversize 3/4-16 RBC
Oversize Tap 3/4-16 +.005 Hand Plug Lead High Speed Steel Black Oxide Regal Beloit This one is GH9 (Oversize Tap)

Diameter and Pitch = 3/4-16

Lead = Hand Plug {3-5 Thread Lead}

H Limit = H9

Number of Flutes = 3

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Manufacturer = Regal Beloit

P/N RBC-0515J35B

Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$34.80
tap oversize 7/8-9 na
Oversize Tap 7/8-9 +.005 Hand Bottom Lead High Speed Steel Black Oxide North American (Oversize Tap)

Diameter and Pitch = 7/8-9

Lead = Hand Bottom {1-2 Thread Lead}

H Limit = +.005

Number of Flutes = 4

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Manufacturer = North American

P/N 808-072ov NA-1x29

Out of Original Manufacturer's packaging all markings on Tap shank
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$36.00
tap oversize 1-8 thrdfrm jarvis
Oversize Tap 1-8 +.005 Thread Forming Hand Bottom Lead High Speed Steel Black Oxide Jarvis U.S.A. (Oversize Tap)

Diameter and Pitch = 1-8

Lead = Hand Bottom {1-2 Thread Lead}

H Limit = H10

Number of Flutes = Thread forming 2 Coolant Grooves

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Manufacturer = Jarvis

P/N NB-75 816-078ov Jarvis 839830

Packed 3 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$44.00
tap oversize M8x1.25 thrdfrm besly
Oversize Tap M8x1.25 +.005 Thread forming Hand Bottom Lead High Speed Steel Uncoated Besly (Oversize Tap)

Diameter and Pitch = M8x1.25

Lead = Hand Bottom {1-2 Thread Lead}

H Limit = H11

Number of Flutes = Thread forming 2 Coolant Grooves

Right Hand Cutting

Coating = Uncoated {Bright}

Ground Threads

Manufacturer = Besly

P/N BESLY-F8030

Packed 12 per unit will re-tube if less than required all markings on tap shank Manufacturer size etc
Applications = Oversize Taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink.
$6.25
tap 4-36 netco
Special Tap 4-36 High Speed Steel Hand Plug Chrome Coated New England Tap U.S.A. (Special Tap)

Diameter and Pitch = 4-36

H Limit = H9

Number of Flutes = 3 Which are straight

Tap Style = Hand Plug {3-5 Thread Lead}

Right Hand Cutting

Coating = Chrome

Ground Threads

P/N = NB-75 netco 24948

Packed 12 per Unit Will re-tube if less than unit required All Markings on Tap Shank - Size, Manufacturer Etc
Applications = General Purpose Steels
$3.50
Per Page      1 - 18 of 18
  • 1