Chamfer/Drill Mills

Chamfer Mill Applications = Eliminates hand deburring operations, provides consistent work piece finish

Drill Mill Applications = Chamfering, Countersinking, Side milling, and Spotting Be careful with the spotting Aluminum's, soft materials OK / Steels you will pop that tip

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}
Sort By:  
sc drllmll 1/8 60dg 4fl tln mnstr
Drill Mill Applications = Chamfering, Countersinking, Side milling, Drilling and Spotting Be careful with the drilling/spotting Aluminum's, soft materials OK / Steels you will pop that tip
$7.00
sc drllmll 1/4 120dg 4fl tln mnstr
Drill Mill Applications = Chamfering, Countersinking, Side milling, Drilling and Spotting Be careful with the drilling/spotting Aluminum's, soft materials OK / Steels you will pop that tip
$12.50
sc drllmll 1-1/4 120dg 4fl FLLRTN
Drill Mill Applications = Chamfering, Countersinking, Side milling, Drilling and Spotting Be careful with the drilling/spotting Aluminum's, soft materials OK / Steels you will pop that tip
$95.00
sc drllmll 19/32 90dg 2fl tin vlnt
Drill Mill Applications = Chamfering, Countersinking, Side milling, Drilling and Spotting Be careful with the drilling/spotting Aluminum's, soft materials OK / Steels you will pop that tip
$45.00
sc chmfrmill 1/8 60dg 2fl tln mnstr
Chamfer Mill Applications = Eliminates hand deburring operations, provides consistent work piece finish
$6.00
sc chmfrmill 3/8 82dg 2fl tln mnstr
Chamfer Mill Applications = Eliminates hand deburring operations, provides consistent work piece finish
$16.00
sc drllmll 1/8 60dg 4fl tln mnstr
Carbide Drill Mill 1/8" Dia {.125"} 4 Flute 60 Degree Tialn Monster 208-641253 (Carbide Drillmill)

Diameter = 1/8"

Shank Diameter = 1/8"

Flute Length = 1/2"

Overall Length = 1-1/2"

Number of Flutes = 4

Angle = 60 Degree

Center Cutting = Yes

Coating = TIALN coated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 208-641253

Drill Mill Applications = Chamfering, Countersinking, Side milling, Drilling and Spotting Be careful with the drilling/spotting Aluminum's, soft materials OK / Steels you will pop that tip
$7.00
sc drllmll 1/4 120dg 4fl tln mnstr
Carbide Drill Mill 1/4" Dia {.250"} 4 Flute 120 Degree Tialn Monster 208-662503 (Carbide Drillmill)

Diameter = 1/4"

Shank Diameter = 1/4"

Flute Length = 3/4"

Overall Length = 2-1/2"

Number of Flutes = 4

Angle = 120 Degree

Center Cutting = Yes

Coating = TIALN coated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 208-662503

Drill Mill Applications = Chamfering, Countersinking, Side milling, Drilling and Spotting Be careful with the drilling/spotting Aluminum's, soft materials OK / Steels you will pop that tip
$12.50
sc drllmll 1-1/4 120dg 4fl FLLRTN
Carbide Drill Mill 1-1/4" Dia {1.250"} 4 Flute 120 Degree Uncoated Fullerton 32027 (Carbide Drillmill)

Diameter = 1-1/4"

Shank Diameter = 1-1/4"

Flute Length = 2"

Overall Length = 4-1/2"

Number of Flutes = 4

Angle = 120 Degree

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 32027

Drill Mill Applications = Chamfering, Countersinking, Side milling, Drilling and Spotting Be careful with the drilling/spotting Aluminum's, soft materials OK / Steels you will pop that tip
$95.00
sc drllmll 19/32 90dg 2fl tin vlnt
Carbide Drill Mill 19/32" Dia {.5938"} 2 Flute 90 Degree Drill Point Tin Valenite 3/61755/9 (Carbide Drillmill)

Diameter = 19/32" {.5938"}

Shank Diameter = 5/8"

Flute Length = 2-3/4"

Overall Length = 5.980"

Number of Flutes = 2

Angle = 90 Degree drill point/ at the end/bottom of the point, where it blends to major diameter, land area is flat {User may of applied as a counterbore type application in soft material}

Center Cutting = Yes

Coating = Tin

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 3/61755/9

Drill Mill Applications = Chamfering, Countersinking, Side milling, Drilling and Spotting Be careful with the drilling/spotting Aluminum's, soft materials OK / Steels you will pop that tip
$45.00
sc chmfrmill 1/8 60dg 2fl tln mnstr
Carbide Chamfer Mill 1/8" Dia {.125"} 4 Flute 60 Degree Tialn Monster 209-064125B (Carbide Chamfer Mill)

Diameter = 1/8" {.125"}

Shank Diameter = 1/8"

Flute Length = 1/2"

Overall Length = 1-1/2"

Number of Flutes = 4

Angle = 60 Degree

Center Cutting = Yes

Coating = Tialn

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 209-064125B

Chamfer Mill Applications = Eliminates hand deburring operations, provides consistent work piece finish
$6.00
sc chmfrmill 3/8 82dg 2fl tln mnstr
Carbide Chamfer Mill 3/8" Dia {.375"} 2 Flute 82 Degree Tialn Monster 209-082375B (Carbide Chamfer Mill)

Diameter = 3/8" {.375"}

Shank Diameter = 3/8"

Flute Length = 1"

Overall Length = 2-1/2"

Number of Flutes = 2

Angle = 82 Degree

Center Cutting = Yes

Coating = Tialn

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 209-082375B

Chamfer Mill Applications = Eliminates hand deburring operations, provides consistent work piece finish
$16.00
Per Page      1 - 6 of 6
  • 1