Thread Form Machine Screw and Fractional Sizes

High Speed Steel Thread Forming Taps - Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don' rule out Stainless Steels.

Right Hand Cutting

Ground Threads

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}
Sort By:  
tap pipe 3/8-18npt thrdform blx
Applications = Aluminum's/Non-Ferrous and General Purpose Steels.
$16.00
tap pipe 1/2-14npt thrdform blx
Applications = Aluminum's/Non-Ferrous and General Purpose Steels.
$24.00
tap thrdfrm 2-64 ttx btm
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$3.00
tap thrdfrm 4-40 nrth am btm
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$3.00
tap thrd frm 6-32 btm balax
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.50
tap thrd frm 6-32 btm tin ttn
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.75
tap thrd frm 6-40 plg btrfld
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.00
tap thrdfrm 8-32 tin btm ttn
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.75
tap thrdfrm 8-32 unctd dk plg
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.50
tap thrdfrm 6-32 h7 ntco btm
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$3.50
tap thrdfrm 8-36 btm ctd
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.50
tap thrdfrm 10-24 btm Balax tin
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.50
tap thrdfrm 10-32 ttn tin btm
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.75
tap thrdfrm 10-32 bath unctd btm
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$3.75
tap thrdfrm 10-32 nel ctd btm osg
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.25
tap thrdfrm 12-24 unctd plg vrmnt
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.50
tap thrdfrm 1/4-20 h3 btm tin ttn
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.25
tap thrdfrm 1/4-20 h4 tin btm ttn
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.25
tap thrdfrm 1/4-20 plg unctd titex
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.50
tap thrdfrm 5/16-18 dk plg
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.00
tap thrdfrm 5/16-18 bsly btm
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.00
tap thrdfrm 5/16-18 btm ttx
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.00
tap thrdfrm 5/16-18 4
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$6.00
tap thrdfrm 3/8-16 btm ttn
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$6.00
tap thrdfrm 3/8-16 btm ttx
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.00
tap thrdfrm 7/16-20 plg besly
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.00
tap thrdfrm 1/2-13 btm dk
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.00
tap thrdfrm 1/2-13 btm thrdwell
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.00
tap thrdfrm 1/2-13 vrmnt
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.00
tap thrdfrm 1/2-13 btm thrdwll
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.00
tap thrdfrm 9/16-12 btm vmnt
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$10.00
tap pipe 3/8-18npt thrdform blx
Pipe Tap 3/8-18NPT High Speed Thread Form with Coolant Groove Balax (Pipe tap)

Diameter and Pitch =3/8-18NPT

Thread Length = 1-1/16" {Standard Projection}

Thread Form with {1} coolant groove that runs down the side of thread

Number of Flutes = Thread form/Roll Form/ Emulsion {Bottom}

Right Hand Cutting

Coating = Uncoated

Ground Threads

P/N = Balax 3237485 3/8npt
Applications = Aluminum's/Non-Ferrous and General Purpose Steels.
$16.00
tap pipe 1/2-14npt thrdform blx
Pipe Tap 1/2-14NPT High Speed Thread Form with Coolant Groove Balax (Pipe tap)

Diameter and Pitch =1/2-14NPT

Thread Length = 1-3/8" {Standard Projection}

Thread Form with {1} coolant groove that runs down the side of thread

Number of Flutes = Thread form/Roll Form/ Emulsion {Bottom}

Right Hand Cutting

Coating = Uncoated

Ground Threads

P/N = Balax 3237485 -1/2npt

Out of original manufacturer's packaging All markings on Shank

Applications = Aluminum's/Non-Ferrous and General Purpose Steels.
$24.00
tap thrdfrm 2-64 ttx btm
Threadform Tap 2-64 Cobalt High Speed Steel Black Oxide Bottoming Titex (Threadform Tap)

Diameter and Pitch = 2-64

H Limit = H3

Tap Style = Bottom

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Coolant Groove = No

P/N = TITEXB4525-012

These came packed 10 per unit Will re-tube if less than 10 required - All taps marked on shank Titex - Cobalt H3 - Etc

Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$3.00
tap thrdfrm 4-40 nrth am btm
Threadform Tap 4-40 High Speed Steel Uncoated Bottoming North American (Threadform Tap)

Diameter and Pitch = 4-40

H Limit = H3

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = Yes {1} running on side of threads

P/N = NB-75 120798 Nrth Am
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$3.00
tap thrd frm 6-32 btm balax
Threadform Tap 6-32 High Speed Steel Uncoated Bottoming Balax (Threadform Tap)

Diameter and Pitch = 6-32

H Limit = H3

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = Yes running on side of threads

P/N = NB-75 Balax 6-32

These came 12 in unit will re-tube if less than unit required All markings on tap shank Balax H3 etc

Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.50
tap thrd frm 6-32 btm tin ttn
Threadform Tap 6-32 High Speed Steel Tin Coated Bottoming Titan U.S.A. (Threadform Tap)

Diameter and Pitch = 6-32

H Limit = H3

Tap Style = Bottom

Right Hand Cutting

Coating = Tin Coated

Ground Threads

Coolant Groove = Yes running on side of threads

P/N = TITAN-TT92840
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.75
tap thrd frm 6-40 plg btrfld
Threadform Tap 6-40 High Speed Steel Uncoated Plug Butterfield U.S.A. (Threadform Tap)

Diameter and Pitch = 6-40

H Limit = H3

Tap Style = Plug

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = No

P/N = NB-75 Btrfield 1580

These came packed 12 per unit will re-tube if less than 12 required all markings on Tap Shank

Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.00
tap thrdfrm 8-32 tin btm ttn
Threadform Tap 8-32 High Speed Steel Tin Coated Bottom Titan U.S.A. (Threadform Tap)

Diameter and Pitch = 8-32

H Limit = H3

Tap Style = Bottom

Right Hand Cutting

Coating = Tin Coated

Ground Threads

Coolant Groove = Yes {1} Down the side of Threads

P/N = TITAN-TT92850
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.75
tap thrdfrm 8-32 unctd dk plg
Threadform Tap 8-32 High Speed Steel Uncoated Plug Durakut Japan (Threadform Tap)

Diameter and Pitch = 8-32

H Limit = H3

Tap Style = Plug

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = Yes {1} Down the side of Threads

P/N = NB-75 DK 8-32 plg

This item packed {3} per unit Will re-tube if less than required All markings on tap shank

Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.50
tap thrdfrm 6-32 h7 ntco btm
Threadform Tap 6-32 High Speed Steel Uncoated Bottom New England Tap {NETCO} (Threadform Tap)

Diameter and Pitch = 6-32

H Limit = H7

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = No

P/N = NETCO-QO3695
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$3.50
tap thrdfrm 8-36 btm ctd
Threadform Tap 8-36 High Speed Steel Uncoated Bottom Cleveland Twist (Threadform Tap)

Diameter and Pitch = 8-36

H Limit = H3

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = Yes {4} running on thread sides

P/N = NB-75 CTD 59242
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.50
tap thrdfrm 10-24 btm Balax tin
Threadform Tap 10-24 High Speed Steel Tin Coated Bottom Balax (Threadform Tap)

Diameter and Pitch = 10-24

H Limit = H4

Tap Style = Bottom

Right Hand Cutting

Coating = Tin Coated

Ground Threads

Coolant Groove = Yes {1} running on thread sides

P/N = NB-75 Blx 3234785
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.50
tap thrdfrm 10-32 ttn tin btm
Threadform Tap 10-32 High Speed Steel Tin Coated Bottom Titan U.S.A. (Threadform Tap)

Diameter and Pitch = 10-32

H Limit = H4

Tap Style = Bottom

Right Hand Cutting

Coating = Tin Coated

Ground Threads

Coolant Groove = Yes {1} running on thread sides

P/N = TITAN-TT92862
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.75
tap thrdfrm 10-32 bath unctd btm
Threadform Tap 10-32 High Speed Steel Uncoated Bottom U.S.A. (Threadform Tap)

Diameter and Pitch = 10-32

H Limit = H5

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = Yes {1} running on thread sides

P/N = NB-75 Bath 6044-1722

This one is made by the old NY Twist Drill {bath Tap division} They are packed 12 per unit so will re-tube if less than unit requested

Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$3.75
tap thrdfrm 10-32 nel ctd btm osg
Threadform Tap 10-32 High Speed Steel NEL coated Bottom OSG (Threadform Tap)

Diameter and Pitch = 10-32

H Limit = H6

Tap Style = Bottom

Right Hand Cutting

Coating = NEL Looks like a dull Chrome

Ground Threads

Coolant Groove = No

P/N = OSG-18903762

This one is made came packed {3} per unit so will re-tube if less than unit requested All markings on Tap Shank

Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.25
tap thrdfrm 12-24 unctd plg vrmnt
Threadform Tap 12-24 High Speed Steel Uncoated Plug Vermont (Threadform Tap)

Diameter and Pitch = 12-24

H Limit = H4

Tap Style = Plug

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = No

P/N = NB-75 VT 388244
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.50
tap thrdfrm 1/4-20 h3 btm tin ttn
Threadform Tap 1/4-20 High Speed Steel Tin Coated Bottom Titan U.S.A. (Threadform Tap)

Diameter and Pitch = 1/4-20

H Limit = H3

Tap Style = Bottom

Right Hand Cutting

Coating = Tin Coated

Ground Threads

Coolant Groove = Yes {2} running Down thread sides

P/N = TITAN-TT92872
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.25
tap thrdfrm 1/4-20 h4 tin btm ttn
Threadform Tap 1/4-20 High Speed Steel Tin Coated Bottom Titan U.S.A. H4 (Threadform Tap)

Diameter and Pitch = 1/4-20

H Limit = H4

Tap Style = Bottom

Right Hand Cutting

Coating = Tin Coated

Ground Threads

Coolant Groove = Yes {4} running Down thread sides

P/N = TITAN-TT92874
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.25
tap thrdfrm 1/4-20 plg unctd titex
Threadform Tap 1/4-20 Cobalt High Speed Steel Uncoated Plug Titex (Threadform Tap)

Diameter and Pitch = 1/4-20 Cobalt

H Limit = H6

Tap Style = Plug

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = No

P/N = TITEXB3526-040

This item came packed 10 per unit will re-tube if less than unit required All markings on TAP Shank

Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.50
tap thrdfrm 5/16-18 dk plg
Threadform Tap 5/16-18 High Speed Steel Uncoated Plug Durakut (Threadform Tap)

Diameter and Pitch = 5/16-18

H Limit = H5

Tap Style = Plug

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = {4} Running down Sides of Threads

P/N = NB-75-044 DK TF
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.00
tap thrdfrm 5/16-18 bsly btm
Threadform Tap 5/16-18 High Speed Steel Uncoated Bottom Besly (Threadform Tap)

Diameter and Pitch = 5/16-18

H Limit = H7

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = No

P/N = NB-75 Besly 2000TF
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.00
tap thrdfrm 5/16-18 btm ttx
Threadform Tap 5/16-18 Cobalt High Speed Steel Uncoated Bottom Titex (Threadform Tap)

Diameter and Pitch = 5/16-18

H Limit = H7

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = No

P/N = 816-044TC
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$4.00
tap thrdfrm 5/16-18 4
Threadform Tap 5/16-18x4" Overall Length High Speed Steel Tin Coated Bottom Besly (Threadform Tap)

Diameter and Pitch = 5/16-18

H Limit = H7

Tap Style = Bottom

Right Hand Cutting

Coating = Tin Coated

Ground Threads

Coolant Groove = {2} Running down sides of threads

P/N = BESLY-L3899

Overall Length 4"

Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$6.00
tap thrdfrm 3/8-16 btm ttn
Threadform Tap 3/8-16 High Speed Steel Uncoated Bottom Titan U.S.A. (Threadform Tap)

Diameter and Pitch = 3/8-16

H Limit = H5

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = {4} Running down side of Threads

P/N = 816-048E TTN
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$6.00
tap thrdfrm 3/8-16 btm ttx
Threadform Tap 3/8-16 Cobalt High Speed Steel Uncoated Bottom Titex (Threadform Tap)

Diameter and Pitch = 3/8-16 {Cobalt}

H Limit = H7

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = No

P/N = 816-048TC7
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.00
tap thrdfrm 7/16-20 plg besly
Threadform Tap 7/16-20 High Speed Steel Uncoated Plug Besly (Threadform Tap)

Diameter and Pitch = 7/16-20

H Limit = H9

Tap Style = Plug

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Coolant Groove = No

P/N = NB-75 7/16-20 Besly TF
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$5.00
tap thrdfrm 1/2-13 btm dk
Threadform Tap 1/2-13 High Speed Steel Uncoated Bottom Durakut (Threadform Tap)

Diameter and Pitch = 1/2-13

H Limit = H5

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = {4} Running down sides of Threads

P/N = NB-75 -056TF DK
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.00
tap thrdfrm 1/2-13 btm thrdwell
Threadform Tap 1/2-13 High Speed Steel Uncoated Bottom Threadwell U.S.A. (Threadform Tap)

Diameter and Pitch = 1/2-13

H Limit = H5

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = {2} Running down sides of Threads

P/N = NB-75 61326 Thrdwll TF
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.00
tap thrdfrm 1/2-13 vrmnt
Threadform Tap 1/2-13 High Speed Steel Uncoated Bottom Vermont (Threadform Tap)

Diameter and Pitch = 1/2-13

H Limit = H7

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = No

P/N = NB-75 VT-388616 TF
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.00
tap thrdfrm 1/2-13 btm thrdwll
Threadform Tap 1/2-13 High Speed Steel Uncoated Bottoming Threadwell U.S.A. (Threadform Tap)

Diameter and Pitch = 1/2-13

H Limit = H8

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = {2} Running down sides of Threads

P/N = NB-75 61325 Thrdwll TF
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$7.00
tap thrdfrm 9/16-12 btm vmnt
Threadform Tap 9/16-12 High Speed Steel Uncoated Bottom Vermont (Threadform Tap)

Diameter and Pitch = 9/16-12

H Limit = H7

Tap Style = Bottom

Right Hand Cutting

Coating = Uncoated

Ground Threads

Coolant Groove = No

P/N = NB-75 Vmnt-067TF
Applications = Used for hand and machine tapping in both thru or blind holes in a wide variety of materials. This style tap is most popular in Aluminum, Brass, Copper and Non-Ferrous Materials. Don't rule out Stainless Steels.
$10.00
Per Page      1 - 31 of 31
  • 1