High Speed Steel NC and Center Style

The NC Style Spot Drills = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering. The Spot & Center type = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}
Sort By:  
spot/ctr dr 3/16-90 hs keo
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.25
spot/ctr dr 1/4-90 hs keo
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.25
spot/ctr dr 1/4-118 hs keo
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.25
spot/ctr dr 3/8-118 hs keo LH
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$7.75
spot/ctr dr 5/8-90 hs keo
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$10.50
spot/ctr dr 5/8-118 hs keo
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$10.50
spot/ctr dr 3/4-118 hs keo
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$11.50
spot/ctr dr 3/16-82 hs ptd
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.00
spot/ctr dr 3/16-90 hs ptd
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.00
spot/ctr dr 3/16-100 hs ptd
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.00
spot/ctr dr 5/16-118 hs imp
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$2.50
spot/ctr dr 5/8-90 hs usa ntd
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$8.00
spot/ctr dr 5/8-118 hs imp
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$5.50
hs spot ctr drill 1-118 imp spn
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$15.00
spot ctr drill hs 1-118 usa
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$24.00
spot ctr dr hs 3/8-118 gtd
Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.50
nc spot drill 2mm 120 titex
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$4.50
nc spot drill 1/4-82dg cblt hertel
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$8.50
nc spot dr hs 5/16-90 usa
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$8.00
nc spot dr hs 5/16-120 usa
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$8.00
nc spot dr hs 5/16-120 ptd tin
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$12.00
nc spot dr hs 23/64-90 ITS
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$12.00
nc spot dr hs 23/64-120 ITS
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$12.00
nc spot dr hs 3/8-120 keo
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$12.00
nc spot dr hs 11.5mm ghr
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$18.00
nc spot dr hs 31/64-90 its
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$16.00
nc spot dr hs 31/64-120 its
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$16.00
nc spot dr hs 1/2-90 PTD
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$16.00
nc spot dr cpm 13mm-150 osg tln
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$14.00
nc spot dr hss 5/8 120dg titex hss
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$22.00
nc spot chamfr dr 5/8 120dg titex hss
Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$15.00
spot/ctr dr 3/16-90 hs keo
Spotting and Centering Drill High Speed Steel 3/16" Dia {.1875"} 90 Degree Right Hand Keo (Spot and centering drill)

Diameter = 3/16"

Shank Diameter = 3/16"

Flute Length = 1/2"

Overall Length = 1-3/8"

Angle = 90 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 30181

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.25
spot/ctr dr 1/4-90 hs keo
Spotting and Centering Drill High Speed Steel 1/4" Dia {.250"} 90 Degree Right Hand Keo (Spot and centering drill)

Diameter = 1/4"

Shank Diameter = 1/4"

Flute Length = 5/8"

Overall Length = 1-1/2"

Angle = 90 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 30251

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.25
spot/ctr dr 1/4-118 hs keo
Spotting and Centering Drill High Speed Steel 1/4" Dia {.250"} 118 Degree Right Hand Keo (Spot and centering drill)

Diameter = 1/4"

Shank Diameter = 1/4"

Flute Length = 5/8"

Overall Length = 1-1/2"

Angle = 118 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 30250

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.25
spot/ctr dr 3/8-118 hs keo LH
Spotting and Centering Drill High Speed Steel 3/8" Dia {.3750"} 118 Degree Left Hand Keo (Spot and centering drill)

Diameter = 3/8"

Shank Diameter = 3/8"

Flute Length = 1"

Overall Length = 2"

Angle = 118 Degree

Left hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 30385

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$7.75
spot/ctr dr 5/8-90 hs keo
Spotting and Centering Drill High Speed Steel 5/8" Dia {.6250"} 90 Degree Right Hand Keo (Spot and centering drill)

Diameter = 5/8"

Shank Diameter = 5/8"

Flute Length = 1-1/8"

Overall Length = 2-1/4"

Angle = 90 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 30581

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$10.50
spot/ctr dr 5/8-118 hs keo
Spotting and Centering Drill High Speed Steel 5/8" Dia {.6250"} 118 Degree Right Hand Keo (Spot and centering drill)

Diameter = 5/8"

Shank Diameter = 5/8"

Flute Length = 1-1/8"

Overall Length = 2-1/4"

Angle = 118 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 30580

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$10.50
spot/ctr dr 3/4-118 hs keo
Spotting and Centering Drill High Speed Steel 3/4" Dia {.750"} 118 Degree Right Hand Keo (Spot and centering drill)

Diameter = 3/4"

Shank Diameter = 3/4"

Flute Length = 1-1/8"

Overall Length = 2-1/4"

Angle = 118 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 30340

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$11.50
spot/ctr dr 3/16-82 hs ptd
Spotting and Centering Drill High Speed Steel 3/16" Dia {.1875"} 82 Degree Right Hand Precision Twist Drill (Spot and centering drill)

Diameter = 3/16"

Shank Diameter = 3/16"

Flute Length = 1/2"

Overall Length = 1-3/8"

Angle = 82 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 97912-82

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.00
spot/ctr dr 3/16-90 hs ptd
Spotting and Centering Drill High Speed Steel 3/16" Dia {.1875"} 90 Degree Right Hand Precision Twist Drill (Spot and centering drill)

Diameter = 3/16"

Shank Diameter = 3/16"

Flute Length = 1/2"

Overall Length = 1-3/8"

Angle = 90 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 97912-90

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.00
spot/ctr dr 3/16-100 hs ptd
Spotting and Centering Drill High Speed Steel 3/16" Dia {.1875"} 100 Degree Right Hand Precision Twist Drill (Spot and centering drill)

Diameter = 3/16"

Shank Diameter = 3/16"

Flute Length = 1/2"

Overall Length = 1-3/8"

Angle = 100 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 97912-100

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.00
spot/ctr dr 5/16-118 hs imp
Spotting and Centering Drill High Speed Steel 5/16" Dia {.3125"} 118 Degree Right Hand (Spot and centering drill)

Diameter = 5/16"

Shank Diameter = 5/16"

Flute Length = 5/8"

Overall Length = 1-1/2"

Angle = 118 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = AF50-020

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$2.50
spot/ctr dr 5/8-90 hs usa ntd
Spotting and Centering Drill High Speed Steel 5/8" Dia {.625"} 90 Degree Right Hand USA (Spot and centering drill)

Diameter = 5/8"

Shank Diameter = 5/8"

Flute Length = 1-1/8"

Overall Length = 2-1/4"

Angle = 90 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 16940

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$8.00
spot/ctr dr 5/8-118 hs imp
Spotting and Centering Drill High Speed Steel 5/8" Dia {.625"} 118 Degree Right Hand (Spot and centering drill)

Diameter = 5/8"

Shank Diameter = 5/8"

Flute Length = 1-1/8"

Overall Length = 2-1/4"

Angle = 118 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = SCD-040 {Spain on Shank} Out of original Manufacturer's packaging

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$5.50
hs spot ctr drill 1-118 imp spn
Spotting and Centering Drill High Speed Steel 1" Dia {1.00"} 118 Degree Right Hand (Spot and centering drill)

Diameter = 1"

Shank Diameter = 1"

Flute Length = 1-1/4"

Overall Length = 2-1/2"

Angle = 118 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = SCD-064 {Spain on Shank} Out of original Manufacturer's packaging

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$15.00
spot ctr drill hs 1-118 usa
Spotting and Centering Drill High Speed Steel 1" Dia {1.00"} 118 Degree Right Hand USA (Spot and centering drill)

Diameter = 1"

Shank Diameter = 1"

Flute Length = 1-1/4"

Overall Length = 2-1/2"

Angle = 118 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = SCD-064 {USA on Shank} Out of original Manufacturer's packaging

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$24.00
spot ctr dr hs 3/8-118 gtd
Spotting and Centering Drill High Speed Steel 3/8" Dia {.3750"} 118 Degree Right Hand Greenfield (Spot and centering drill)

Diameter = 3/8"

Shank Diameter = 3/8"

Flute Length = 1"

Overall Length = 2"

Angle = 118 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 49474

Applications = Can be chucked close to the point for maximum rigidity in centering and spotting operations. Short flute length and overall length, no body clearance.
$3.50
nc spot drill 2mm 120 titex
NC Spot Drill High Speed Steel 2MM Dia {.0787"} 120 Degree Right Hand Titex (NC Spot Drill)

Diameter = 2MM {.0787"}

Shank Diameter = 2MM

Flute Length = 1/4"

Overall Length = 1.885"

Angle = 120 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = A1114

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$4.50
nc spot drill 1/4-82dg cblt hertel
NC Spot Drill M42 Cobalt 1/4" Dia {.250"} 82 Degree Right Hand Hertel (NC Spot Drill)

Diameter = 1/4"

Shank Diameter = 1/4"

Flute Length = 7/8"

Overall Length = 2-5/8"

Angle = 82 Degree

Right hand spiral/Cut

M42 Cobalt High Speed Steel

Coating = Uncoated

Manufacturers P/N = 33483

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$8.50
nc spot dr hs 5/16-90 usa
NC Spot Drill High Speed Steel 5/16" Dia {.3125"} 90 Degree Right Hand (NC Spot Drill)

Diameter = 5/16"

Shank Diameter = 5/16"

Flute Length = 1-1/8"

Overall Length = 2.940"

Angle = 90 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = NCS-020 Here is the tale on these Purchased these as 12" Blanks in a deal and I recalled from my original days {excitably} Fagersta was treasured by the pioneer's of this industry for it's toughness in machining Anyway had these made into NC Spot drills, they do not all have Fagersta marked on them - had to have them cut and the marking{s} where only in a specific location. The CNC Tool manufacturer ground a really nice thin web on these for free cutting action. Found this brief history on Fagersta Six Centuries of Steel Originating in Sweden, Fagersta has 650 years of experience in global steel markets. Fagersta has been synonymous with steel for six centuries in Sweden The Fagersta mills have made significant contributions to the development of Stainless Steel, High Speed Steel and many other sophisticated steel products. Johan August Brinell was chief engineer. He gained world fame by inventing an apparatus and the method for measuring hardness that carries his name to this day.

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$8.00
nc spot dr hs 5/16-120 usa
NC Spot Drill High Speed Steel 5/16" Dia {.3125"} 120 Degree Right Hand (NC Spot Drill)

Diameter = 5/16"

Shank Diameter = 5/16"

Flute Length = 1-1/8"

Overall Length = 2.940"

Angle = 120 Degree

Right hand spiral/Cut

High Speed Steel

Coating = Uncoated

Manufacturers P/N = NCS-020A Here is the tale on these Purchased these as 12" Blanks in a deal and I recalled from my original days {excitably} Fagersta was treasured by the pioneer's of this industry for it's toughness in machining Anyway had these made into NC Spot drills, they do not all have Fagersta marked on them - had to have them cut and the marking{s} where only in a specific location. The CNC Tool manufacturer ground a really nice thin web on these for free cutting action. Found this brief history on Fagersta Six Centuries of Steel Originating in Sweden, Fagersta has 650 years of experience in global steel markets. Fagersta has been synonymous with steel for six centuries in Sweden The Fagersta mills have made significant contributions to the development of Stainless Steel, High Speed Steel and many other sophisticated steel products. Johan August Brinell was chief engineer. He gained world fame by inventing an apparatus and the method for measuring hardness that carries his name to this day.

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$8.00
nc spot dr hs 5/16-120 ptd tin
NC Spot Drill High Speed Steel 5/16" Dia {.3125"} 120 Degree Long Tin Coated Right Hand Precision Twist Drill (NC Spot Drill)

Diameter = 5/16"

Shank Diameter = 5/16"

Flute Length = 1-3/16"

Overall Length = 5-1/4"

Angle = 120 Degree

Right hand spiral/Cut

Coating = TIN coated

Manufacturers P/N = SM6129

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$12.00
nc spot dr hs 23/64-90 ITS
NC Spot Drill High Speed Steel 23/64" Dia {.3594"} 90 Degree Right Hand Double End (NC Spot Drill)

Diameter = 23/64"

Shank Diameter = 23/64"

Flute Length = 1-7/16"

Overall Length = 4.950"

Angle = 90 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = NCS-023DE-90 Purchased a High Speed Steel Drill Blank deal {these particular blanks made by ACE Drill} Had the cutter grinder make them and decided double end, Web is a little heavy on these

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$12.00
nc spot dr hs 23/64-120 ITS
NC Spot Drill High Speed Steel 23/64" Dia {.3594"} 120 Degree Right Hand Double End (NC Spot Drill)

Diameter = 23/64"

Shank Diameter = 23/64"

Flute Length = 1-1/4"

Overall Length = 5.080"

Angle = 120 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = NCS-023DE-120 Purchased a High Speed Steel Drill Blank deal {these particular blanks made by ACE Drill} Had the cutter grinder make them and decided double end, Web is a little heavy on these

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$12.00
nc spot dr hs 3/8-120 keo
NC Spot Drill High Speed Steel 3/8" Dia {.375"} 120 Degree Right Hand Keo (NC Spot Drill)

Diameter = 3/8"

Shank Diameter = 3/8"

Flute Length = 1-1/8"

Overall Length = 3-1/8"

Angle = 120 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 33380

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$12.00
nc spot dr hs 11.5mm ghr
NC Spot Drill Cobalt 11.50MM Dia {.4528"} 90 Degree Right Hand Long Guhring (NC Spot Drill)

Diameter = 11.50MM {.4528"}

Shank Diameter = 11.50MM Tang on Shank

Flute Length = 3"

Overall Length = 7-5/8"

Angle = 90 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = GUHR-11.50MM A few of these are out original packaging All marked on Shank Guhring HSCO

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$18.00
nc spot dr hs 31/64-90 its
NC Spot Drill High Speed Steel 31/64" Dia {.4844"} 90 Degree Right Hand Double End (NC Spot Drill)

Diameter = 31/64"

Shank Diameter = 31/64"

Flute Length = 1-1/4"

Overall Length = 6"

Angle = 90 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = NCS-031DE-90 Purchased a High Speed Steel Drill Blank deal {these particular blanks made by ACE Drill} Had the cutter grinder make them and decided double end, Web is a little heavy on these

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$16.00
nc spot dr hs 31/64-120 its
NC Spot Drill High Speed Steel 31/64" Dia {.4844"} 120 Degree Right Hand Double End (NC Spot Drill)

Diameter = 31/64"

Shank Diameter = 31/64"

Flute Length = 1-1/4"

Overall Length = 6"

Angle = 120 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = NCS-031DE-120 Purchased a High Speed Steel Drill Blank deal {these particular blanks made by ACE Drill} Had the cutter grinder make them and decided double end, Web is a little heavy on these

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$16.00
nc spot dr hs 1/2-90 PTD
NC Spot Drill High Speed Steel 1/2" Dia {.500"} 90 Degree Right Hand Precision Twist Drill (NC Spot Drill)

Diameter = 1/2"

Shank Diameter = 1/2"

Flute Length = 1-1/2"

Overall Length = 4"

Angle = 90 Degree

Right hand spiral/Cut

Coating = Uncoated

Manufacturers P/N = 87902

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$16.00
nc spot dr cpm 13mm-150 osg tln
NC Spot Drill Crucible Powdered Metal {CPM} 13MM Dia {.5118"} 150 Degree Right Hand TIALN Ctd 16MM Shank {6299"} OSG (NC Spot Drill)

Diameter = 13MM {.5118"}

Shank Diameter = 16MM {.6299"}

Flute Length = 1-3/8"

Overall Length = 4-1/4"

Angle = 150 Degree

Right hand spiral/Cut

Coating =Tialn

Manufacturers P/N = 87902 This item out of original Manufacturer's packaging all Items marked on Shank

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$14.00
nc spot dr hss 5/8 120dg titex hss
NC Spot Drill Vanadium High Speed Steel 5/8"Dia {.625"} 120 Degree Right Hand Titex (NC Spot Drill)

Diameter = 5/8"

Shank Diameter = 5/8"

Flute Length = 1-1/2"

Overall Length = 4-1/2"

Angle = 120 Degree

Right hand spiral/Cut

Vanadium High Spped Steel

Coating =Uncoated

Manufacturers P/N = A1114

NCS-040COB TTX

This item out of original Manufacturer's packaging all Items marked on Shank

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$22.00
nc spot chamfr dr 5/8 120dg titex hss
NC Spot/Chamfer Mill High Speed Steel 16MM Dia {.6299"} 120 Degree Right Hand Titex (NC Spot/Chamfer Mill)

Diameter = 16MM {.6299"}

Shank Diameter = 16MM

Flute Length = 7/8"

Overall Length = 4-1/2"

Angle = 120 Degree

Right hand spiral/Cut

Coating =Uncoated

Manufacturers P/N = A1123 This item will spot and chamfer

Applications = Ideal for close tolerance NC spotting operations. Provides a more accurate and faster spotting location for follow-up drilling. Eliminates wandering.
$15.00
Per Page      1 - 31 of 31
  • 1