Solid Carbide Chucking

Solid Carbide offers excellent hardness, wear and heat resistance for higher cutting speeds and longer tool life. High rigidity enhances hole accuracy and quality,

Recommended for general reaming in Steels, Aluminum, brass, bronze plastics, and abrasive materials

45 Degree Chamfered End

Diameter Tolerances

+.0000 / -.0002" up to 1/4" diameter

+.0000 / -.0003" .2501" and over
Sort By:  
rmr sc 5/64 rhs
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.00
rmr sc 0914
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$7.50
rmr sc 0920
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$5.50
rmr sc 0925
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$5.50
rmr sc 0935
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.50
rmr sc 096 sgs
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.50
rmr sc .0135
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .014
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0145
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0156
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0185
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .019
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0195
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .020  76
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .021  75
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0215
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .022
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0235
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0255
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0275
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .034
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$5.50
rmr sc 59 0595
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.50
rmr sc 0630
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$5.50
rmr sc 070
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.00
rmr sc 0775
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$5.50
rmr sc 5/64
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.00
rmr sc 096 fllrtn
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.50
rmr sc 096  usa
Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.50
rmr sc 110 menlo  usa
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$4.50
rmr sc 113 menlo  usa
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$4.50
rmr sc 1/8 mnstr
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$4.00
rmr sc 1/8 fllrtn
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$4.00
rmr sc 126
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 1392
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$9.00
rmr sc 1406
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$4.00
rmr sc 144
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 157
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 159
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 161
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 161 lng
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$7.50
rmr sc 163
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$7.50
rmr sc 164
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$7.50
rmr sc 165
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$7.50
rmr sc 11/64
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$6.50
rmr sc 173
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$6.50
rmr sc 177
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$6.50
rmr sc 1825
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$7.50
rmr sc 1875
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 1875 mnstr
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 5/64 rhs
Solid carbide Chucking Reamer 5/64" {.0781"} Diameter Right Hand Cut Right Hand Spiral Metal Removal (Solid Carbide Reamer)

Diameter = 5/64" {.0781"}

Flute Length = 1/2"

Overall Length = 1-7/8"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .067" - Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Metal Removal

P/N = 425-005SF MR

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.00
rmr sc 0914
Solid carbide Chucking Reamer .0914" Diameter Right Hand Cut Straight Flute RTW (Solid Carbide Reamer)

Diameter = .0914"

Flute Length = 1/2"

Overall Length = 2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .077" - Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Rogers Tool Works

P/N = 425-0914

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$7.50
rmr sc 0920
Solid carbide Chucking Reamer .092" Diameter Right Hand Cut Right Hand Spiral USA (Solid Carbide Reamer)

Diameter = .0920"

Flute Length = 1/2"

Overall Length = 2-1/2"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .088" - Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Menlo Tool

P/N = 425-0920

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$5.50
rmr sc 0925
Solid carbide Chucking Reamer 2.35MM {.0925"} Diameter Right Hand Cut Right Hand Spiral USA (Solid Carbide Reamer)

Diameter = 2.35MM {.0925"}

Flute Length = 1/2"

Overall Length = 2-1/2"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .088" - Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Menlo Tool

P/N = 425-0925

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$5.50
rmr sc 0935
Solid carbide Chucking Reamer Number 42 {.0935"} Diameter Right Hand Cut Right Hand Spiral Fullerton (Solid Carbide Reamer)

Diameter = Number 42 {.0935"}

Flute Length = 1/2"

Overall Length = 2-1/2"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .078" - Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Fullerton Tool

P/N = 425-142

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.50
rmr sc 096 sgs
Solid carbide Chucking Reamer Number 41 {.096"} Diameter Right Hand Cut Straight Flute SGS Tool (Solid Carbide Reamer)

Diameter = Number 41 {.0960"}

Flute Length = 5/8"

Overall Length = 2-1/4"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = There is an undercut after Flute{s} end and the diameter is .092"x5/8" In length the shank then goes to .1094" - Straight

Coating = Uncoated

Solid Carbide

Manufacturer = SGS Tool

P/N = 425-141 SGS

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.50
rmr sc .0135
Solid carbide Chucking Reamer Number 80 {.0135"} Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = Number 80 {.0135"}

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .013" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-180

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .014
Solid carbide Chucking Reamer .014" Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = .0140"

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0138" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-0140

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0145
Solid carbide Chucking Reamer Number 79 {.0145"} Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = Number 79 {.0145"}

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .014" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-179

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0156
Solid carbide Chucking Reamer 1/64" {.0156"} Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = 1/64" {.0156"}

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .015" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-001

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0185
Solid carbide Chucking Reamer .0185" Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = .0185"

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .018" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-0185

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .019
Solid carbide Chucking Reamer .019" Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = .019"

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0188" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-019

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0195
Solid carbide Chucking Reamer .0195" Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = .0195"

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0193" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-0195

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .020  76
Solid carbide Chucking Reamer Number 76 {.020"} Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = Number 76 {.020"}

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0198" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-176

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .021  75
Solid carbide Chucking Reamer Number 75 {.021"} Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = Number 75 {.021"}

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0208" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-175

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0215
Solid carbide Chucking Reamer .0215" Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = .0215"

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0213" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-0215

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .022
Solid carbide Chucking Reamer .022" Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = .0220"

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0218" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-0220

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0235
Solid carbide Chucking Reamer .0235" Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = .0235"

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0233" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-0235

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0255
Solid carbide Chucking Reamer .0255" Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = .0255"

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0253" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-0255

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .0275
Solid carbide Chucking Reamer .0275" Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = .0275"

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0273" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-0275

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$9.00
rmr sc .034
Solid carbide Chucking Reamer .034" Diameter Right Hand Cut Straight Flute Titan USA (Solid Carbide Reamer)

Diameter = .0340"

Flute Length = 1/4"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0338" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Titan

P/N = 425-0340

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$5.50
rmr sc 59 0595
Solid carbide Chucking Reamer Number 53 {.0595"} Diameter Right Hand Cut Straight Flute SGS (Solid Carbide Reamer)

Diameter = Number 53 {.0595"}

Flute Length = 3/8"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = Straight - These are undercut after Flute{s} end to.056" Shank Dia x 3/8" In Length The shank then goes to 1/16"

Coating = Uncoated

Solid Carbide

Manufacturer = SGS Tool

P/N = 425-0595-200

Original Manufacturer's packaging, No Markings shank

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.50
rmr sc 0630
Solid carbide Chucking Reamer 1.6MM {.063"} Diameter Right Hand Cut Straight Flute OSG (Solid Carbide Reamer)

Diameter = 1.6MM {.0630"}

Flute Length = 3/8"

Overall Length = 1-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .051" Straight

Coating = Uncoated

Solid Carbide

Manufacturer = OSG Tool

P/N = OSG-300-0630

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$5.50
rmr sc 070
Solid carbide Chucking Reamer Number 50 {.070"} Diameter Right Hand Cut Straight Flute SGS Tool (Solid Carbide Reamer)

Diameter = Number 50 {.0700"}

Flute Length = 1/2"

Overall Length = 2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = There is an undercut after Flutes{s} end and Shank Dia is .061" x 1/2" In Length The Shank Diameter then Goes to .078" - Straight

Coating = Uncoated

Solid Carbide

Manufacturer = SGS Tool

P/N = 425-150 SGS 200

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.00
rmr sc 0775
Solid carbide Chucking Reamer .0775 Diameter Right Hand Cut Straight Flute SGS Tool (Solid Carbide Reamer)

Diameter = .0775"

Flute Length = 3/4"

Overall Length = 3"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .067" - Straight

Coating = Uncoated

Solid Carbide

Manufacturer = SGS Tool

P/N = 425-0775

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$5.50
rmr sc 5/64
Solid carbide Chucking Reamer 5/64" {.0781"} Diameter Right Hand Cut Straight Flute USA (Solid Carbide Reamer)

Diameter = 5/64" {.0781"}

Flute Length = 3/4"

Overall Length = 3"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .067" - Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Menlo Tool

P/N = 425-005

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.00
rmr sc 096 fllrtn
Solid carbide Chucking Reamer Number 41 {.096"} Diameter Right Hand Cut Right Hand Spiral Fullerton (Solid Carbide Reamer)

Diameter = Number 41 {.0960"}

Flute Length = 1/2"

Overall Length = 2"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .078"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Fullerton Tool

P/N = 425-141 096R

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.50
rmr sc 096  usa
Solid carbide Chucking Reamer Number 41 {.096"} Diameter Right Hand Cut Right Hand Spiral USA (Solid Carbide Reamer)

Diameter = Number 41 {.0960"}

Flute Length = 3/4"

Overall Length = 2-1/2"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .0958"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Carbax

P/N = 425-141 096L

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder- 45 Degree Chamfer
$4.50
rmr sc 098  usa
Solid carbide Chucking Reamer Number 40 {.098"} Diameter Right Hand Cut Straight Flute Long with Drill Point USA (Solid Carbide Reamer)

Diameter = Number 40 {.0980"}

Flute Length = 3/4"

Overall Length = 6"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .0978"- Straight

This reamer comes to a drill point Tip/ Minor end is .065" it blends to the Major Reamer diameter of .098"and the length of point is .155" {+/-.005" these dimensions}

Coating = Uncoated

Solid Carbide

Manufacturer = Sterling Carbide

P/N = 425-140 STERLING

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc
Solid C2 grade premium sub-micron carbide with 10% cobalt binder
$7.50
rmr sc 110 menlo  usa
Solid carbide Chucking Reamer Number 35 {.110"} Diameter Right Hand Cut Right Hand Spiral USA (Solid Carbide Reamer)

Diameter = Number 35 {.1100"}

Flute Length = 5/8"

Overall Length = 2-3/4"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .105"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Menlo Tool

P/N = 425-1100RHS

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$4.50
rmr sc 113 menlo  usa
Solid carbide Chucking Reamer Number 33 {.113"} Diameter Right Hand Cut Right Hand Spiral USA (Solid Carbide Reamer)

Diameter = Number 33 {.1130"}

Flute Length = 1/2"

Overall Length = 2-1/4"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .0938"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Menlo Tool

P/N = 425-113RL

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$4.50
rmr sc 1/8 mnstr
Solid carbide Chucking Reamer 1/8" {.125"} Diameter Right Hand Cut Straight Flute Monster Tool (Solid Carbide Reamer)

Diameter = 1/8" {.1250"}

Flute Length = 5/8"

Overall Length = 2-1/4"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .120"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = 425-008 500-001008

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$4.00
rmr sc 1/8 fllrtn
Solid carbide Chucking Reamer 1/8" {.125"} Diameter Right Hand Cut Right Hand Spiral Fullerton (Solid Carbide Reamer)

Diameter = 1/8" {.1250"}

Flute Length = 5/8"

Overall Length = 2-1/4"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .1094"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Fullerton Tool

Part Number = 425-008R-125

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$4.00
rmr sc 126
Solid carbide Chucking Reamer .126 Diameter Right Hand Cut Right Hand Spiral USA (Solid Carbide Reamer)

Diameter = .1260"

Flute Length = 5/8"

Overall Length = 2-1/4"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .120"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Menlo Tool

Part Number = 425-126R

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 1392
Solid carbide Chucking Reamer .1392" Diameter Right Hand Cut Straight Flute SGS Tool (Solid Carbide Reamer)

Diameter = .1392"

Flute Length = 3/4"

Overall Length = 2-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .140"- Straight - After flute{s} end the shank is undercut to .131" diameter for approx 3/4" then shank goes to .140"

Coating = Uncoated

Solid Carbide

Manufacturer = SGS Tool

Part Number = 425-1392

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$9.00
rmr sc 1406
Solid carbide Chucking Reamer 9/64" {.1406"} Diameter Right Hand Cut Straight Flute Fullerton (Solid Carbide Reamer)

Diameter = 9/64" {.1406"}

Flute Length = 7/8"

Overall Length = 3-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .125"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Fullerton Tool

Part Number = 425-009-1406

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$4.00
rmr sc 144
Solid carbide Chucking Reamer Number 27 {.144"} Diameter Right Hand Cut Straight Flute OSG (Solid Carbide Reamer)

Diameter = Number 27 {.1440"}

Flute Length = 3/4"

Overall Length = 2-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .134"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = OSG Tool

Part Number = OSG-300-1440

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 157
Solid carbide Chucking Reamer Number 22 {.157"} Diameter Right Hand Cut Straight Flute OSG (Solid Carbide Reamer)

Diameter = Number 22 {.1570"}

Flute Length = 3/4"

Overall Length = 2-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .140"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = OSG Tool

Part Number = OSG-300-1570

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 159
Solid carbide Chucking Reamer Number 21 {.159"} Diameter Right Hand Cut Straight Flute USA (Solid Carbide Reamer)

Diameter = Number 21 {.1590"}

Flute Length = 3/4"

Overall Length = 2-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .140"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Ultra Tool

Part Number = 425-1590

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 161
Solid carbide Chucking Reamer Number 20 {.161"} Diameter Right Hand Cut Straight Flute SGS Tool (Solid Carbide Reamer)

Diameter = Number 20 {.1610"}

Flute Length = 7/8"

Overall Length = 2-3/4"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .1719"- Straight - There is an undercut after Flutes{s} end The shank diameter goes to .157" for approx .830" In length then steps up to 11/64"

Coating = Uncoated

Solid Carbide

Manufacturer = SGS Tool

Part Number = 425-1610

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 161 lng
Solid carbide Chucking Reamer Number 20 {.161"} Diameter Right Hand Cut Straight Flute Long with a drill Point USA (Solid Carbide Reamer)

Diameter = Number 20 {.1610"}

Flute Length = 1-3/8"

Overall Length = 6"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .1593"- Straight

Drill Point Dimensions = .082" at tip x 1/4" in length then Blends to reamer diameter

Coating = Uncoated

Solid Carbide

Manufacturer = Ultra Tool

Part Number = 425-1610- ST1257B-161

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$7.50
rmr sc 163
Solid carbide Chucking Reamer .163" Diameter Right Hand Cut Straight Flute Garr Tool (Solid Carbide Reamer)

Diameter = .1630"

Flute Length = 7/8"

Overall Length = 2-3/4"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .1593"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Garr Tool

Part Number = 425-1630

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$7.50
rmr sc 164
Solid carbide Chucking Reamer .164" Diameter Right Hand Cut Straight Flute with Pilot CJT (Solid Carbide Reamer)

Diameter = .1640"

Flute Length = 3/4"

Overall Length = 4-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .151"- Straight

Pilot Dimensions = .128" In Diameter x 1/2" in Length

Coating = Uncoated

Solid Carbide

Manufacturer = CJT Koolcarb

Part Number = 425-1640P B1-3082-0505

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$7.50
rmr sc 165
Solid carbide Chucking Reamer .165" Diameter Right Hand Cut Straight Flute Ultra Tool Usa (Solid Carbide Reamer)

Diameter = .1650"

Flute Length = 1"

Overall Length = 4-1/2"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .156"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Ultra Tool

Part Number = 425-1650

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$7.50
rmr sc 11/64
Solid carbide Chucking Reamer 11/64" {.1719"} Diameter Right Hand Cut Right Hand Spiral with Pilot USA (Solid Carbide Reamer)

Diameter = 11/64" {.1719"}

Flute Length = 1-1/2"

Overall Length = 4-5/16"

Number of Flutes = 4 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .170"- Straight

Pilot Dimensions = .127" in Diameter x 3/8" in Length

Coating = Uncoated

Solid Carbide

Manufacturer = Tungsten Industries

Part Number = 425-171P TS112.822

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc
Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$6.50
rmr sc 173
Solid carbide Chucking Reamer Number 17 {.173"} Diameter Right Hand Cut Straight Flute SGS Tool (Solid Carbide Reamer)

Diameter = Number 17 {.1730"}

Flute Length = 7/8"

Overall Length = 2-3/4"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .1875"- Straight There is an undercut after Flute{s} end and the undercut diameter is .167" for 13/16" In Length

Coating = Uncoated

Solid Carbide

Manufacturer = SGS Tool

Part Number = 425-1730-17

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$6.50
rmr sc 177
Solid carbide Chucking Reamer Number 16 {.177"} Diameter Right Hand Cut Straight Flute USA (Solid Carbide Reamer)

Diameter = Number 16 {.1770"}

Flute Length = 7/8"

Overall Length = 2.700"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .170"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Baystate - USA

Part Number = 425-1770-16

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$6.50
rmr sc 1825
Solid carbide Chucking Reamer .1825" Diameter Right Hand Cut Straight Flute Lavalle Ide (Solid Carbide Reamer)

Diameter = .1825"

Flute Length = 7/8"

Overall Length = 2-3/4"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .181"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Lavalee & Ide

Part Number = 425-1825-893431

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$7.50
rmr sc 1875
Solid carbide Chucking Reamer 3/16" {.1875}" Diameter Right Hand Cut Straight Flute Metal Removal (Solid Carbide Reamer)

Diameter = 3/16" {.1875"}

Flute Length = 7/8"

Overall Length = 2-3/4"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .171"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Metal Removal

Part Number = 425-012 MR

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
rmr sc 1875 mnstr
Solid carbide Chucking Reamer 3/16" {.1875}" Diameter Right Hand Cut Straight Flute Monster Tool (Solid Carbide Reamer)

Diameter = 3/16" {.1875"}

Flute Length = 7/8"

Overall Length = 2-3/4"

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .182"- Straight

Coating = Uncoated

Solid Carbide

Manufacturer = Monster Tool

Part Number = 425-012 500-001012

Original Manufacturer's packaging, Markings on Shank MFG, Size, etc

Solid C2 grade premium sub-micron carbide with 10% cobalt binder - 45 Degree Chamfer
$5.50
Per Page      1 - 50 of 87