Specialty - Special Application

This category offers a unique listing of specialty reamers for Your very specific application{s}.

Some of these products may of been manufactured for a user's specific job, some are not. They may come in handy for You as well. You can get a little creative with these, You can purchase these at a reasonable cost - grind a diameter or shape, cut a special length, etc.
Sort By:  
rmr  7-0 tpr pin
For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$11.50
rmr  5-0 tpr pin sp fl
For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$11.50
rmr  5-0 tpr pin helical
For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$11.50
rmr  2-0 tpr pin sp fl sc
For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$16.50
rmr  1 tpr pin helical fl
For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$13.50
rmr  2 tpr pin sprl fl
For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$6.50
rmr  3 tpr pin sprl fl
For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$12.50
rmr  3 tpr pin helical fl
For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$13.50
rmr  4 tpr pin helical fl
For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$15.50
rmr  Ltr P Die maker
Helical Flute Die maker reamer with .013" taper per inch -.156" taper per foot
$15.50
rmr .4375 ct exp rock river
45 Degree chamfer Carbide tipped expansion style for reaming steel, cast iron, non-ferrous metals, plastics and non metals
$28.00
rmr .4375 ct exp ctd
45 Degree chamfer Carbide tipped expansion style for reaming steel, cast iron, non-ferrous metals, plastics and non metals
$28.00
rmr .5312 hs exp rmr
45 Degree chamfer - Expansion feature to permit resharpening after becoming worn
$16.00
rmr .750 hs exp rmr
45 Degree chamfer - Expansion feature to permit resharpening after becoming worn
$22.00
rmr .750 tpr pipe
3/4" Taper per foot - For reaming holes to be tapped with American Standard Taper Pipe Taps
$20.00
rmr 1.4375 shell
Designed as sizing or finishing reamers and are held on an arbor with driving lugs
$45.00
rmr  .207 x long
Chucking Reamer Cobalt High Speed Steel .207" Diameter Right Hand Cut Straight Flute XX-Long Alvord Polk (Chucking Reamer High Speed Steel Decimal)

Diameter = .2070"

Flute Length = 1.280"

Overall Length = 10"

Number of Flutes = 6 Which are Straight

Right Hand Cutting

Shank Diameter/Style = .201" - Straight

Coating = Uncoated

M42 Cobalt High Speed Steel

Manufacturer = Alvord Polk

P/N = REC-207

Original Manufacturer's packaging, marked on shank, Size, HSS, Mfg, etc

The Extra Length may give You some options if Your job requires - length/reach/cut to Your specific need Etc

Internal note: location unit 4/shelf 6/decimal

45 Degree Chamfer for reaming of most materials
$22.50
rmr  2515 sc hd brzd
Chucking Reamer .2515" Diameter Carbide Head Brazed On A High Speed Steel Shank Right Hand Cut Right Hand Spiral Fullerton (Chucking Reamer Special-Special Application)

Diameter = .2515"

Flute Length = 1-1/2"

Overall Length = 6"

Number of Flutes = 6 Which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = .218" - Straight/High speed Steel

Coating = Uncoated

Solid Carbide Head and the head length = 2"

Manufacturer = Fullerton

P/N = RRA-2515R-1450R

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

Solid carbide head Brazed on a High Speed Steel Shank
45 Degree Chamfer for reaming of most materials-
$8.50
rmr  375 sc hd brzd
Chucking Reamer 3/8" {.375"] Diameter Carbide Head Brazed On A High Speed Steel Shank Right Hand Cut Straight Flute USA (Chucking Reamer Special-Special Application)

Diameter = 3/8" {.3750"}

Flute Length = 1-5/8"

Overall Length = 7"

Number of Flutes = 6 Which are Straight and are Solid carbide

Right Hand Cutting

Shank Diameter/Style = .3708" - Straight/High speed Steel

Coating = Uncoated

Solid Carbide Head and the head length = 1-3/4"

Manufacturer = Baystate

P/N = 450-3/8

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

Solid carbide head Brazed on a High Speed Steel Shank
45 Degree Chamfer for reaming of most materials-
$11.50
rmr  3906 sc hd brzd
Chucking Reamer 25/64" {.3906"] Diameter Carbide Head Brazed On A High Speed Steel Shank Right Hand Cut Straight Flute USA (Chucking Reamer Special-Special Application)

Diameter = 25/64" {.3906"}

Flute Length = 1-5/8"

Overall Length = 7"

Number of Flutes = 6 Which are Straight and are Solid carbide

Right Hand Cutting

Shank Diameter/Style = .379" - Straight/High speed Steel

Coating = Uncoated

Solid Carbide Head and the head length = 1-3/4"

Manufacturer = Baystate

P/N = 450-25/64

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

Solid carbide head Brazed on a High Speed Steel Shank
45 Degree Chamfer for reaming of most materials-
$11.50
rmr  4062 sc hd brzd 5 flt
Chucking Reamer 13/32" {.4062"] Diameter Carbide Head Brazed On A High Speed Steel Shank Right Hand Cut 5 Straight Flutes Atrax Carbide (Chucking Reamer Special-Special Application)

Diameter = 13/32" {.4026"}

Flute Length = 1-5/8"

Overall Length = 7"

Number of Flutes = 5 Which are Straight and are Solid carbide

Right Hand Cutting

Shank Diameter/Style = .390" - Straight/High speed Steel

Coating = Uncoated

Solid Carbide Head and the head length = 2"

Manufacturer = Atrax Carbide

P/N = 1565-13/32

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

Solid carbide head Brazed on a High Speed Steel Shank
45 Degree Chamfer for reaming of most materials-
$11.50
rmr  4062 sc hd brzd 6 flt
Chucking Reamer 13/32" {.4062"] Diameter Carbide Head Brazed On A High Speed Steel Shank Right Hand Cut 6 Straight Flutes Atrax Carbide (Chucking Reamer Special-Special Application)

Diameter = 13/32" {.4026"}

Flute Length = 1-5/8"

Overall Length = 7"

Number of Flutes = 6 Which are Straight and are Solid carbide

Right Hand Cutting

Shank Diameter/Style = .390" - Straight/High speed Steel

Coating = Uncoated

Solid Carbide Head and the head length = 2"

Manufacturer = Atrax Carbide

P/N = 1565-13/32 6 Flute

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

Solid carbide head Brazed on a High Speed Steel Shank
45 Degree Chamfer for reaming of most materials-
$11.50
rmr  6092 sc hd brzd
Chucking Reamer .6092" Diameter Carbide Head Brazed On A High Speed Steel Shank Right Hand Cut Left Hand Spiral Fullerton (Chucking Reamer Special-Special Application)

Diameter = 6092"

Flute Length = 1-3/4"

Overall Length = 9"

Number of Flutes = 6 Which are Left hand Spiral and are Solid carbide

Right Hand Cutting

Shank Diameter/Style = .562" - Straight/High speed Steel

Coating = Uncoated

Solid Carbide Head and the head length = 2-1/4"

Manufacturer = Fullerton Tool

P/N = 1450L-6092

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

Solid carbide head Brazed on a High Speed Steel Shank
45 Degree Chamfer for reaming of most materials-
$16.50
rmr  7-0 tpr pin
Taper Pin Reamer 7/0 Diameter High Speed Steel Right Hand Cut Left Hand Helical Flute Lavalle Ide (Reamer Special-Special Application)

Diameter = 7/0

Small Diameter = .0497"

Large Diameter = .0666"

Flute Length = 13/16"

Overall Length = 1-13/16"

Number of Flutes = 4 Which are Left hand Helical Spiral

Right Hand Cutting

Shank Diameter/Style = .0781" - Straight - Plain Round No Square

Coating = Uncoated

High Speed Steel

Manufacturer = Lavalle & Ide

P/N = 588-7/0

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$11.50
rmr  5-0 tpr pin sp fl
Taper Pin Reamer 5/0 Diameter High Speed Steel Right Hand Cut Left Hand Spiral Flute Cleveland Twist Drill (Reamer Special-Special Application)

Diameter = 5/0

Small Diameter = .0719"

Large Diameter = .0966"

Flute Length = 1-3/16"

Overall Length = 2-13/16"

Number of Flutes = 4 Which are Left hand Spiral

Right Hand Cutting

Shank Diameter/Style = .1094" - Straight - Square on Shank

Coating = Uncoated

High Speed Steel

Manufacturer = Cleveland Twist Drill

P/N = CTD-C24272

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$11.50
rmr  5-0 tpr pin helical
Taper Pin Reamer 5/0 Diameter High Speed Steel Right Hand Cut Left Hand Helical Flute Lavalle Ide (Reamer Special-Special Application)

Diameter = 5/0

Small Diameter = .0719"

Large Diameter = .0966"

Flute Length = 1-3/16"

Overall Length = 2-13/16"

Number of Flutes = 2 Which are Left hand Helical Spiral

Right Hand Cutting

Shank Diameter/Style = .1094" - Straight - Round Shank - No Square on Shank

Coating = Uncoated

High Speed Steel

Manufacturer = Lavalee Ide

P/N = LI-588-5/0

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$11.50
rmr  2-0 tpr pin sp fl sc
Taper Pin Reamer 2/0 Diameter Solid Carbide Right Hand Cut Left Hand Spiral Flute Atrax (Reamer Special-Special Application)

Diameter = 2/0

Small Diameter = .1137"

Large Diameter = .1462"

Flute Length = 1-5/8"

Overall Length = 2-5/8"

Number of Flutes = 4 Which are Left hand Spiral

Right Hand Cutting

Shank Diameter/Style = .156" - Straight - No Square on Shank

Coating = Uncoated

Solid Carbide

Manufacturer = Atrax Carbide

P/N = 1575L-2/0

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$16.50
rmr  1 tpr pin helical fl
Taper Pin Reamer Number 1 Diameter High Speed Steel Right Hand Cut Left Hand Helical Flute Lavalle Ide (Reamer Special-Special Application)

Diameter = #1

Small Diameter = .1447"

Large Diameter = .1798"

Flute Length = 1-11/16"

Overall Length = 2-15/16"

Number of Flutes = 3 Which are Left hand Helical Spiral

Right Hand Cutting

Shank Diameter/Style = .1875" - Straight - No Square on Round Shank

Coating = Uncoated

High Speed Steel

Manufacturer = Lavalle & Ide

P/N = 588-1

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$13.50
rmr  2 tpr pin sprl fl
Taper Pin Reamer Number 2 Diameter High Speed Steel Right Hand Cut Left Hand Spiral Flute Taiwan (Reamer Special-Special Application)

Diameter = #2

Small Diameter = .1605"

Large Diameter = .2008"

Flute Length = 1-15/16"

Overall Length = 3-3/16"

Number of Flutes = 6 Which are Left hand Spiral

Right Hand Cutting

Shank Diameter/Style = .2031" - Straight - Square on Shank

Coating = Uncoated

High Speed Steel

Manufacturer = Unknown Taiwan

P/N = TPN-34278-H

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$6.50
rmr  3 tpr pin sprl fl
Taper Pin Reamer Number 3 Diameter High Speed Steel Right Hand Cut Left Hand Spiral Flute Cleveland Twist Drill (Reamer Special-Special Application)

Diameter = #3

Small Diameter = .1813"

Large Diameter = .2294"

Flute Length = 2-15/16"

Overall Length = 3-11/16"

Number of Flutes = 6 Which are Left hand Spiral

Right Hand Cutting

Shank Diameter/Style = .2344" - Straight - Square on Shank

Coating = Uncoated

High Speed Steel

Manufacturer = Cleveland Twist Drill

P/N = CTD-74280

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$12.50
rmr  3 tpr pin helical fl
Taper Pin Reamer Number 3 Diameter High Speed Steel Right Hand Cut Left Hand Helical Flute Lavalle Ide (Reamer Special-Special Application)

Diameter = #3

Small Diameter = .1813"

Large Diameter = .2294"

Flute Length = 2-5/16"

Overall Length = 3-11/16"

Number of Flutes = 3 Which are Left hand Helical Spiral

Right Hand Cutting

Shank Diameter/Style = .2344" - Straight - No Square on Round Shank

Coating = Uncoated

High Speed Steel

Manufacturer = Lavalle & Ide

P/N = 588-3

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$13.50
rmr  4 tpr pin helical fl
Taper Pin Reamer Number 4 Diameter High Speed Steel Right Hand Cut Left Hand Helical Flute Lavalle Ide (Reamer Special-Special Application)

Diameter = #4

Small Diameter = .2071"

Large Diameter = .2604"

Flute Length = 2-9/16"

Overall Length = 4-1/16"

Number of Flutes = 3 Which are Left hand Helical Spiral

Right Hand Cutting

Shank Diameter/Style = .2656" - Straight - No Square on Round Shank

Coating = Uncoated

High Speed Steel

Manufacturer = Lavalle & Ide

P/N = 588-4

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

For Reaming tapered Holes that receive standard taper pins. Taper pin Reamers have a taper of 1/4" Per Foot. Straight Flute = for hand use in reaming most materials. Helical Flute = Machine reaming of most materials and these are manufactured with a Left Hand High Helix- Right Hand cutting. Spiral Flute = Hand reaming with a left hand spiral helix - Right Hand cutting.
$15.50
rmr  Ltr P Die maker
Die Maker Reamer Letter P Diameter High Speed Steel Right Hand Cut Left Hand Helical Flute Morse Cutting Tools (Reamer Special-Special Application)

Diameter = Letter P

Small Diameter = .2750"

Large Diameter = .3270"

Flute Length = 4-1/2"

Overall Length = 6"

Number of Flutes = 3 Which are Left hand Helical Spiral

Right Hand Cutting

Shank Diameter/Style = .313" - Straight - No Square on Round Shank

Coating = Uncoated

High Speed Steel

Manufacturer = Morse Cutting tools/Lavalle & Ide It is in a Morse Tube But Lavalle Ide is marked on shank Made by L&I and Morse purchased them out from them

P/N = 1678-P

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

Helical Flute Die maker reamer with .013" taper per inch -.156" taper per foot
$15.50
rm .248 xxlong
Chucking Reamer 6.30MM {.2480"} Diameter XX Long High Speed Steel Right Hand Cut Straight Flute Alvord Polk (Reamer Special-Special Application)

Diameter = 6.3MM {.2480"}

Flute Length = 1-1/2"

Overall Length = 12"

Number of Flutes = 6 which are straight

Right Hand Cutting

Shank Diameter/Style = .240"-Straight

Coating = Uncoated

High Speed Steel

Manufacturer= Alvord Polk

P/N = REA-2480XL

Out of Original Manufacturer's packaging, marked on shank, Size, HSS, Mfg, etc

Note: location spec app rmr
Chucking reamer - 45 degree chamfer for most materials
$22.00
rmr .355 pcd
Chucking Reamer .355" Diameter Polycrystalline Diamond Coolant thru Right hand Cut Straight Flute Kennametal (Reamer Special-Special Application)

Diameter = .3550"

Flute Length = 13/16"

Overall Length = 3-1/4"

Number of Flutes = 4 which are straight { 4 coolant exit holes/ 1 per flute and they are evenly offset on opposing flutes} Let's say flute 1-3 they are same location ditto flutes 2 and 4 but not same on all 4 flutes

Right Hand Cutting

Shank Diameter/Style = .374"-Straight {there is one coolant hole on bottom of shank}

Coating = Uncoated

Polycrystalline Diamond on a solid carbide body - The length of the PCD tip is Approx .140"

Manufacturer= Kennametal

P/N = KNMTL-35561

Original Manufacturer's packaging, marked on shank, Size, PCD, Mfg, etc

Polycrystalline - for non ferrous metals and non metallic materials
$58.00
rmr .3744
Chucking Reamer .3744" Diameter High Speed Steel Right hand Cut Right Hand Spiral Number 1 Morse Taper Shank Greenfield (Reamer Special-Special Application)

Diameter = .3744"

Flute Length = 4"

Overall Length = 7-3/4"

Number of Flutes = 6 which are Right Hand Spiral

Right Hand Cutting

Shank Diameter/Style = Number 1 Morse Taper

Coating = Uncoated

High Speed Steel

Manufacturer= Greenfield

P/N = GTD-620114

Original Manufacturer's packaging, marked on shank, Size, HSS, Mfg, etc

note: location spec app
45 Degree chamfer for reaming most materials
$18.00
rmr .4219 oil hole
Chucking Reamer 27/64" {.4219"} Diameter High Speed Steel Right hand Cut Right Hand Spiral Number Oil Hole Lavalle Ide (Reamer Special-Special Application)

Diameter = 27/64" {.4219"}

Flute Length = 3"

Overall Length = 9-1/4"

Number of Flutes = 6 which are Right Hand Spiral {with 2 exiting oil holes that oppose each other let's call them flutes 3 and 6}

Right Hand Cutting

Shank Diameter/Style = .420" - Straight {with 4 oil holes}

Coating = Uncoated

High Speed Steel

Manufacturer= Lavalle & Ide - Canada

P/N = L&I-CJ2005-4219

Original Manufacturer's packaging, marked on shank, Size, HSS, Mfg, etc

45 Degree chamfer for reaming most materials
$22.00
rmr .4375 ct exp rock river
Carbide tipped Expansion Reamer 7/16" {.4375"} Diameter Right hand Cut Straight Flute Number 1 Morse Taper Shank Rock River USA (Reamer Special-Special Application)

Diameter = 7/16" {.4375"} Expansion Style

Flute Length = 1" {the Carbide Tip runs full length of Flutes}

Overall Length = 7"

Number of Flutes = 4 which are straight

Right Hand Cutting

Shank Diameter/Style = #1 Morse Taper

Coating = Uncoated

Carbide tipped on a High Speed Steel body

Manufacturer= Rock River

P/N = 246714

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

45 Degree chamfer Carbide tipped expansion style for reaming steel, cast iron, non-ferrous metals, plastics and non metals
$28.00
rmr .4375 ct exp ctd
Carbide tipped Expansion Reamer 7/16" {.4375"} Diameter Right hand Cut Straight Flute Number 1 Morse Taper Shank Cleveland Twist Drill (Reamer Special-Special Application)

Diameter = 7/16" {.4375"} Expansion Style

Flute Length = 1" {the Carbide Tip runs full length of Flutes}

Overall Length = 7"

Number of Flutes = 6 which are straight

Right Hand Cutting

Shank Diameter/Style = #1 Morse Taper

Coating = Uncoated

Carbide tipped on a High Speed Steel body

Manufacturer= Cleveland Twist Drill

P/N = CTD-51218

Original Manufacturer's packaging, marked on shank, Size, Mfg, etc

45 Degree chamfer Carbide tipped expansion style for reaming steel, cast iron, non-ferrous metals, plastics and non metals
$28.00
rmr .5312 hs exp rmr
Expansion Reamer 17/32" {.5312"} Diameter High Speed Steel Right hand Cut Straight Flute Number 1 Morse Taper Shank USA (Reamer Special-Special Application)

Diameter = 17/32" {.5312"} Expansion Style

Flute Length = 1"

Overall Length = 8"

Number of Flutes = 6 which are straight

Right Hand Cutting

Shank Diameter/Style = #1 Morse Taper

Coating = Uncoated

High Speed Steel

Manufacturer= Standard Tool

P/N = STD-39034

Original Manufacturer's packaging, marked on shank, Size, HSS, Mfg, etc

45 Degree chamfer - Expansion feature to permit resharpening after becoming worn
$16.00
rmr .6562 hs exp rmr
Expansion Chucking Reamer 21/32" {.6562"} Diameter High Speed Steel Right hand Cut Straight Flute Number 2 Morse Taper Shank Japan (Reamer Special-Special Application)

Diameter = 21/32" {.6562"} Expansion Style

Flute Length = 1-1/4"

Overall Length = 9"

Number of Flutes = 8 which are straight

Right Hand Cutting

Shank Diameter/Style = #2 Morse Taper

Coating = Uncoated

High Speed Steel

Manufacturer= Japan-Unknown

P/N = NB-75 042

Original Manufacturer's packaging, marked on shank, Size, HSS, Mfg, etc

45 Degree chamfer - Expansion feature to permit resharpening after becoming worn
$20.00
rmr .750 hs exp rmr
Expansion Chucking Reamer 3/4" {.750"} Diameter High Speed Steel Right hand Cut Straight Flute China (Reamer Special-Special Application)

Diameter = 3/4" {.7500"} Expansion Style

Flute Length = 1-3/8"

Overall Length = 9-1/2"

Number of Flutes = 8 which are straight

Right Hand Cutting

Shank Diameter/Style = .624 Straight

Coating = Uncoated

High Speed Steel

Manufacturer= China

P/N = BH51-048

Original Manufacturer's packaging, marked on shank, Size, HSS, Mfg, etc

45 Degree chamfer - Expansion feature to permit resharpening after becoming worn
$22.00
rmr .750 tpr pipe
Taper Pipe Reamer 3/4" {.750"} Diameter High Speed Steel Right hand Cut Straight Flute Poland (Reamer Special-Special Application)

Diameter = 3/4" {.7500"}

Flute Length = 1-3/8"

Overall Length = 3-1/4"

Number of Flutes = 8 which are straight

Right Hand Cutting

Shank Diameter/Style = .9063 Straight

Coating = Uncoated

High Speed Steel

Large end Diameter = .962"

Small end Diameter= .876"

P/N = Poland-41/06

Manufacturer= Poland

Original Manufacturer's packaging, marked on shank, Size, HSS, Mfg, etc

3/4" Taper per foot - For reaming holes to be tapped with American Standard Taper Pipe Taps
$20.00
rmr 1.4375 shell
Shell Reamer 1-7/16" {1.4375"} Diameter High Speed Steel Right hand Cut Straight Flute Cleveland Twist drill (Reamer Special-Special Application)

Diameter = 1-7/16" {1.4375"} Expansion type

Flute Length = 2"

Overall Length = 3"

Number of Flutes = 8 which are straight

Right Hand Cutting

Hole Size = .750

Coating = Uncoated

High Speed Steel

Manufacturer = Cleveland Twist Drill

P/N = CTD-38804

Original Manufacturer's packaging, marked on shank, Size, HSS, Mfg, etc

Designed as sizing or finishing reamers and are held on an arbor with driving lugs
$45.00
rmr .625 x long
Chucking Reamer 5/8" {.625"} Diameter High Speed Steel Right hand Cut Left Hand Spiral Really Long Number 2 Morse Taper Shank Cleveland Twist Drill (Reamer Special-Special Application)

Diameter = 5/8" {.6250"}

Flute Length = 8"

Overall Length = 12"

Number of Flutes = 8 which are Left hand Spiral

Right Hand Cutting

Shank Diameter = #2 Morse Taper

Coating = Uncoated

High Speed Steel

Manufacturer = Cleveland Twist Drill {this one is Marked GB I would guess Great Britain}

P/N = CTD-82144

Original Manufacturer's packaging, marked on shank, Size, HSS, Mfg, etc

45 Degree Chamfer for reaming of most materials
$64.00
Per Page      1 - 29 of 29
  • 1