Boring Bars Indexable Steel Shank

Various Assorted Steel Shank Boring bars for Your specific application.

Items listed will be specified if they are solid or coolant thru shanks.
Sort By:  
brng bar qtr inch lh ccmt-21.5
SCLCL Style Bar - Negative 5 Degree - End and Side Cutting edge angle for 7 degree positive 80 Degree Style Insert
$27.45
brng bar 3/8 lh ccmt-21.5
SCLCL Style Bar - Negative 5 Degree - End and Side Cutting edge angle for 7 degree positive 80 Degree Style Insert
$24.00
brng bar 5/8 lh ccmt-21.5
SCLCL Style Bar - Negative 5 Degree - End and Side Cutting edge angle for 7 degree positive 80 Degree Style Insert
$29.00
brng bar 5/16 lh dcmt-21.5
SDUCL Style Bar - Negative 3 Degree Profile and End Cutting edge angle for 7 degree positive 55 Degree Style Insert
$28.00
brng bar 3/8 lh tcmt-21.5
STUCL Style Bar - Negative 3 Degree End Cutting edge angle for 7 degree positive TCMT Degree Style Insert
$28.00
brng bar 5/8 lh tcmt-21.5
STUCL Style Bar - Negative 3 Degree End Cutting edge angle for 7 degree positive TCMT Degree Style Insert
$38.00
brng bar 1 rh tpg-32 krly
CTFPR Style Bar - 0 Degree Lead Angle For Positive TPG-32_ Series Style Insert
$92.00
brng bar 1 rh VCGT-32 krly
SVQCR Style Bar - Negative 3 Degree End Cutting Edge Angle for 7 Degree Positive VC_T-32_ Series 35 Degree Insert - 107.5 Degree into corner
$92.00
brng bar 4 pc kit sandvik five eights
This item is a Sandvik 4 piece kit - Grooving-Threading-Turning Tools with Master Holder
$185.00
brng bar qtr inch lh ccmt-21.5
Boring Bar 1/4 Inch Shank Diameter CCMT Style Insert Left Hand Boring and Facing Micro 100 (Steel Shank Boring Bar)

Shank Diameter = 1/4"

Bar has a flat on top and bottom if You use a bushing with a set screw to lock it down}

Minimum Bore Diameter = .330"

Overall Length = 3.130"

Bar Style = 90 Degree Boring and Facing with a 95 Deg Approach Angle -

Insert Style = Holds any CCMT-21.5_ / 80 Degree Diamond shape insert

This is a non coolant LEFT Hand Steel Shank bar

Comes with {1} each M2.5 screw and a flag style T-8 Torx wrench

No inserts come with this bar

Industry standard part number = SI-SCLCL-04-2M

Manufacturer P/N = 21-0922

SCLCL Style Bar - Negative 5 Degree - End and Side Cutting edge angle for 7 degree positive 80 Degree Style Insert
$27.45
brng bar 3/8 lh ccmt-21.5
Boring Bar 3/8 Inch Shank Diameter CCMT Style Insert Left Hand Boring and Facing Micro 100 (Steel Shank Boring Bar)

Shank Diameter = 3/8"

Bar has a flat on top and bottom if You use a bushing with a set screw to lock it down}

Minimum Bore Diameter = .490"

Overall Length = 4.900"

Bar Style = 90 Degree Boring and Facing with a 95 Deg Approach Angle

Insert Style = Holds any CCMT-21.5_ / 80 Degree Diamond shape insert

This is a non coolant LEFT Hand Steel Shank bar

Comes with {1} each M2.5 screw and a flag style T-8 Torx wrench

No inserts come with this bar

Industry standard part number = SI-SCLCL-06-2M

Manufacturer P/N = 21-0926

SCLCL Style Bar - Negative 5 Degree - End and Side Cutting edge angle for 7 degree positive 80 Degree Style Insert
$24.00
brng bar 5/8 lh ccmt-21.5
Boring Bar 5/8 Inch Shank Diameter CCMT Style Insert Left Hand Boring and Facing Micro 100 (Steel Shank Boring Bar)

Shank Diameter = 5/8"

Bar has a flat on top and bottom if You use a bushing with a set screw to lock it down}

Minimum Bore Diameter = .775"

Overall Length = 7.865"

Bar Style = 90 Degree Boring and Facing with a 95 Deg Approach Angle

Insert Style = Holds any CCMT-21.5_ / 80 Degree Diamond shape insert

This is a non coolant LEFT Hand Steel Shank bar

Comes with {1} each M2.5 screw and a flag style T-8 Torx wrench

No inserts come with this bar

Industry standard part number = SI-SCLCL-10-2M

Manufacturer P/N = 21-0930

SCLCL Style Bar - Negative 5 Degree - End and Side Cutting edge angle for 7 degree positive 80 Degree Style Insert
$29.00
brng bar 5/16 lh dcmt-21.5
Boring Bar 5/16 Inch Shank Diameter DCMT Style Insert Left Hand Coolant Thru Micro 100 (Steel Shank Boring Bar)

Shank Diameter = 5/16"

Bar has a flat on top and bottom if You use a bushing with a set screw to lock it down}

Minimum Bore Diameter = .425"

Overall Length = 3.930"

Bar Style = Profile, Boring and Facing with a 107.5 Deg Approach Angle

Insert Style = Holds any DCMT-21.5_ / 55 Degree Diamond shape insert

This is a coolant thru LEFT Hand Steel Shank bar

Comes with {1} each M2.5 screw and a flag style T-8 Torx wrench

No inserts come with this bar

Industry standard part number = SI-SDUCL-05-2M

Manufacturer P/N = 20-0902

SDUCL Style Bar - Negative 3 Degree Profile and End Cutting edge angle for 7 degree positive 55 Degree Style Insert
$28.00
brng bar 3/8 lh tcmt-21.5
Boring Bar 3/8 Inch Shank Diameter TCMT Style Insert Left Hand Coolant Thru Micro 100 (Steel Shank Boring Bar)

Shank Diameter = 3/8"

Bar has a flat on top and bottom if You use a bushing with a set screw to lock it down}

Minimum Bore Diameter = .490"

Overall Length = 4.470"

Bar Style = Blind Bores with 90 degree Face - Nice for getting up to a shoulder

Insert Style = Holds any TCMT-21.5_ / Triangular Shape Insert 3 Edges

This is a coolant thru LEFT Hand Steel Shank bar

Comes with {1} each M2.5 screw and a flag style T-8 Torx wrench

No inserts come with this bar

Industry standard part number = SI-STUCL-06-2M

Manufacturer P/N = 20-1032

STUCL Style Bar - Negative 3 Degree End Cutting edge angle for 7 degree positive TCMT Degree Style Insert
$28.00
brng bar 5/8 lh tcmt-21.5
Boring Bar 5/8 Inch Shank Diameter TCMT Style Insert Left Hand Coolant Thru Micro 100 (Steel Shank Boring Bar)

Shank Diameter = 5/8"

Bar has a flat on top and bottom if You use a bushing with a set screw to lock it down}

Minimum Bore Diameter = .775"

Overall Length = 5.900"

Bar Style = Blind Bores with 90 degree Face - Nice for getting up to a shoulder

Insert Style = Holds any TCMT-21.5_ / Triangular Shape Insert 3 Edges

This is a coolant thru LEFT Hand Steel Shank bar

Comes with {1} each M2.5 screw and a flag style T-8 Torx wrench

No inserts come with this bar

Industry standard part number = SI-STUCL-10-2C

Manufacturer P/N = 20-1036

STUCL Style Bar - Negative 3 Degree End Cutting edge angle for 7 degree positive TCMT Degree Style Insert
$38.00
brng bar 1 rh tpg-32 krly
Boring Bar 1 Inch Diameter Steel Shank TPG-32_ Style Insert Right Hand Korloy (Steel Shank Boring Bar)

Shank Diameter = 1"

Bar has a flat on top and bottom if You use a bushing with a set screw to lock it down

Minimum Bore Diameter = 1.280"

Overall Length = 12"

Bar Style = "0" Degree End Cutting Edge Angle

Insert Style = Holds any TPG/TPMR/TPU/32_ / Triangular Shape Insert 3 Edges

This is a Non coolant Right Hand Steel Shank bar

Comes with {1} Top Clamp/Clamp Screw/Hex Wrench - No Seat required with this bar

No inserts come with this bar

Industry standard part number = S16T-CTFPR-3

Manufacturer P/N = S16T-CTFPR-3

CTFPR Style Bar - 0 Degree Lead Angle For Positive TPG-32_ Series Style Insert
$92.00
brng bar 1 rh VCGT-32 krly
Boring Bar 1 Inch Diameter Steel Shank VC_T-32_ Style Insert Right Hand Korloy (Steel Shank Boring Bar)

Shank Diameter = 1"

Bar has a flat on top and bottom if You use a bushing with a set screw to lock it down

Minimum Bore Diameter = 1.375"

Overall Length = 12"

Bar Style = "3" Degree End Cutting Edge Angle

Insert Style = Holds any VCGT/VCGW/VCMT/VCMW-32_ Style Insert

This is a Non coolant Right Hand Steel Shank bar

Comes with {1} Top Clamp/Clamp Screw/T15 Flag Torx - No Seat required with this bar

No inserts come with this bar

Industry standard part number = S16T-SVQCR-3

Manufacturer P/N = S16T-SVQCR-3

SVQCR Style Bar - Negative 3 Degree End Cutting Edge Angle for 7 Degree Positive VC_T-32_ Series 35 Degree Insert - 107.5 Degree into corner
$92.00
brng bar 4 pc kit sandvik five eights
Boring Bar Kit 5/8 Inch Diameter Steel Shank with Carbide Components Sandvik 4 pieces (Steel Shank Boring Bar Kit with Carbide Components)

This deal comes with 4 pcs total

Shank Diameter Master Holder = 5/8" Steel Shank Bar has a flat on top and bottom Sandvik Part Number CXS-A0625-05

Overall Length = 75MM or 2.952"

Shank Height = 14MM or .551"

Body Diameter /Overall Height = 15.75MM or .620" / 18MM Or .7087"

Shank is Coolant Thru ----------------------------------------------------------------------------------------

Right Hand 60 Degree V-Profile Threading Tool - Solid Carbide Tin Coated Sandvik Part Number = CXS-05TH050VM-5215R Grade 1025

Minimum Entry Diameter = 5.2MM or .205" {This would refer to Bore Diameter Let's Call it}

Width At Tip = .006"

Minimum Threads Per Inch = 36

Maximum Threads Per Inch = 48

Depth of Usable Length= 15MM or .591"

Diameter of this Usable Length = .148"

Overall Length = 1.460" ________________________________________________________________________________________________________

Right Hand Grooving Tool Solid Carbide Tin Coated Sandvik Part Number = CXS-05G078-5220R Grade 1025

Minimum Entry Diameter = 5.2MM or .205" {This would refer to Bore Diameter Let's Call it}

Cutting Width = 0.78MM or .0307"

Cutting Depth Maximum= 1MM or .0394"

Depth of Usable Length= 15MM or .591"

Diameter of this Usable Length = .148"

Overall Length = 1.663" __________________________________________________________________________________________________________

Right Hand Turning Tool Solid Carbide Tin Coated Sandvik Part Number = CXS-05T098-20-5225R Grade 1025

Minimum Entry Diameter = 5.2MM or .205" {This would refer to Bore Diameter Let's Call it}

Depth of Cut = 0.5mm or .0197"

Depth of Usable Length= 25MM or .9843"

Diameter of this Usable Length = .1673"

Overall Length = 1.860"

Lead Angle = -8 Degree

Tool Edge Cutting Angle = 98 Degree

Maximum Ramp Angle = 17 Degree ---------------------------------------------- Part Number = KIT-CXS-A0625-05 ---------------------------------------------- Sandvik does a nice job on their site of breaking down the technical info if You require more information You can Google any of the Sandvik Part Numbers for clarification{s}
This item is a Sandvik 4 piece kit - Grooving-Threading-Turning Tools with Master Holder
$185.00
Per Page      1 - 9 of 9
  • 1