LEFT HAND Jobbers and Screw Machine

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.

Can use as screw extractor for drilling out broken studs or fasteners.

The shorter rigid drill minimizes deflection when heavy feed rates are used.

General Purpose drills suitable for most applications on a wide variety of materials

Ground from solid High Speed Steel Blanks

Perform well under many different operations

Bright finish = polished flutes enhances chip evacuation especially for aluminum{s} and other non-ferrous materials

Black oxide Surface treatment = increases wear resistance,reduces galling and chip welding, increases drill lubrication retention

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}
Sort By:  
drill bit 17/64
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.75
drill bit 9/32
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.00
drill bit 19/64
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.00
drill bit 5/16
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.00
drill bit 8.7mm Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.00
drill bit 11/32 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.25
drill bit 23/64 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.25
drill bit 3/8 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.50
drill bit 10MM Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.50
drill bit 13/32 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$3.00
drill bit 27/64 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$3.50
drill bit 7/16 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$3.75
drill bit 15/32 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$4.50
drill bit 31/64 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$5.50
drill bit 1/2 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$5.50
drill bit #6 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.50
drill bit #8 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.25
drill bit #28 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$0.75
drill bit #36 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$0.75
drill bit #40 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$0.75
drill bit #44 Lh smd
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$0.75
drill bit #3 Lh jld
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.75
drill bit #4 Lh jld
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.75
drill bit 7/32 Lh jld
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.50
drill bit #1 Lh jld
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.75
drill bit 15/64 Lh jld
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.00
drill bit 5/16 Lh jld
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.50
drill bit 17/64
Left Hand Screw Machine Length Drill 17/64" {.2656"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 17/64" {.2656"} Tap Drill 1/4-20 S.T.I. {heli-coil}

Flute Length = 1-7/16"

Overall Length = 2-5/8"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-17/64

Drills are marked on shank Mfg, Country of Origin, HSS ETC. This item came packed 12 per unit will re-pack if less than unit ordered

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.75
drill bit 9/32
Left Hand Screw Machine Length Drill 9/32" {.2812"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 9/32" {.2812"}

Flute Length = 1-1/2"

Overall Length = 2-11/16"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-9/32

Drills are marked on shank Mfg, Country of Origin, HSS ETC. This item came packed 12 per unit will re-pack if less than unit ordered

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.00
drill bit 19/64
Left Hand Screw Machine Length Drill 19/64" {.2969"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 19/64" {.2969"}

Flute Length = 1-9/16"

Overall Length = 2-3/4"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-19/64

Drills are marked on shank Mfg, Country of Origin, HSS ETC. This item came packed 12 per unit will re-pack if less than unit ordered

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.00
drill bit 5/16
Left Hand Screw Machine Length Drill 5/16" {.3125"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 5/16" {.3125"} Tap Drill 3/8-16 Cut Tap

Flute Length = 1-5/8"

Overall Length = 2-13/16"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-5/16

Drills are marked on shank Mfg, Country of Origin, HSS ETC. This item came packed 12 per unit will re-pack if less than unit ordered

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.00
drill bit 8.7mm Lh smd
Left Hand Screw Machine Length Drill 8.7MM {.3425"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 8.7MM {.3425"}

Flute Length = 1-11/16"

Overall Length = 3"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-8.7MM

Drills are marked on shank Mfg, Country of Origin, HSS ETC. This item came packed 12 per unit will re-pack if less than unit ordered

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.00
drill bit 11/32 Lh smd
Left Hand Screw Machine Length Drill 11/32" {.3438"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 11/32" {.3438"}

Flute Length = 1-11/16"

Overall Length = 3"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-11/32

Drills are marked on shank Mfg, Country of Origin, HSS ETC. This item came packed 12 per unit will re-pack if less than unit ordered

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.25
drill bit 23/64 Lh smd
Left Hand Screw Machine Length Drill 23/64" {.3594"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 23/64" {.3594"}

Flute Length = 1-3/4"

Overall Length = 3-1/16"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-23/64

Drills are marked on shank Mfg, Country of Origin, HSS ETC. This item came packed 12 per unit will re-pack if less than unit ordered

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.25
drill bit 3/8 Lh smd
Left Hand Screw Machine Length Drill 3/8" {.375"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 3/8" {.3750"}

Flute Length = 1-13/16"

Overall Length = 3-1/8"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-3/8

Drills are marked on shank Mfg, Country of Origin, HSS ETC. This item came packed 12 per unit will re-pack if less than unit ordered

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.50
drill bit 10MM Lh smd
Left Hand Screw Machine Length Drill 10MM {.3937"} Diameter High Speed Steel Guhring (Left Hand Screw Machine Drill)

Drill Diameter = 10MM {.3937"}

Flute Length = 1-7/8"

Overall Length = 3-1/4"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = NB-75 GUHR-00226 10MM

Drills are marked on shank Mfg, Country of Origin, HSS ETC. This item came packed 12 per unit will re-pack if less than unit ordered

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.50
drill bit 13/32 Lh smd
Left Hand Screw Machine Length Drill 13/32" {.4062"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 13/32" {.4062"} Tap Drill 7/16-14 Threadform Tap

Flute Length = 1-15/16"

Overall Length = 3-5/16"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-13/32

Drills are marked on shank Mfg, Country of Origin, HSS ETC.

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$3.00
drill bit 27/64 Lh smd
Left Hand Screw Machine Length Drill 27/64" {.4219"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 27/64" {.4219"} Tap Drill for 1/2-13 Cut Tap

Flute Length = 2"

Overall Length = 3-3/8"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-27/64

Drills are marked on shank Mfg, Country of Origin, HSS ETC.

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$3.50
drill bit 7/16 Lh smd
Left Hand Screw Machine Length Drill 7/16" {.4375"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 7/16" {.4375"} Tap Drill for 1/4-18NPT/NPTF/NPSF Cut Tap

Flute Length = 2-1/16"

Overall Length = 3-7/16"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-7/16

Drills are marked on shank Mfg, Country of Origin, HSS ETC.

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$3.75
drill bit 15/32 Lh smd
Left Hand Screw Machine Length Drill 15/32" {.4688"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 15/32" {.4688"}

Flute Length = 2-1/8"

Overall Length = 3-5/8"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-15/32

Drills are marked on shank Mfg, Country of Origin, HSS ETC.

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$4.50
drill bit 31/64 Lh smd
Left Hand Screw Machine Length Drill 31/64" {.4844"} Diameter High Speed Steel Standard Tool (Left Hand Screw Machine Drill)

Drill Diameter = 31/64" {.4844"} Tap Drill 9/16-12 Cut Tap

Flute Length = 2-3/16"

Overall Length = 3-11/16"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Polished

High Speed Steel

P/N = NB-75 STD-16281

Drills are marked on shank Mfg, Country of Origin, HSS ETC.

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$5.50
drill bit 1/2 Lh smd
Left Hand Screw Machine Length Drill 1/2" {.500"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter = 1/2" {.5000"}

Flute Length = 2-1/4"

Overall Length = 3-3/4"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-1/2

Drills are marked on shank Mfg, Country of Origin, HSS ETC.

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$5.50
drill bit #6 Lh smd
Left Hand Screw Machine Length Drill Number 6 {.204"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter =#6 {.2040"}

Flute Length = 1-1/4"

Overall Length = 2-3/8"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-6

Drills are marked on shank Mfg, Country of Origin, HSS ETC. Packed 12 per unit if less thank unit ordered wil re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.50
drill bit #8 Lh smd
Left Hand Screw Machine Length Drill Number 8 {.199"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter =#8 {.1990"}

Flute Length = 1-3/16"

Overall Length = 2-1/4"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Black Oxide

High Speed Steel

P/N = TITEX-A1131-8

Drills are marked on shank Mfg, Country of Origin, HSS ETC. Packed 12 per unit if less thank unit ordered wil re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.25
drill bit #28 Lh smd
Left Hand Screw Machine Length Drill Number 28 {.1405"} Diameter High Speed Steel U.S.A. (Left Hand Screw Machine Drill)

Drill Diameter =#28 {.1405"}

Flute Length = 15/16"

Overall Length = 1-15/16"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Polished

High Speed Steel

P/N = NB-75 Bendix 26423

Drills are marked on shank Mfg, Country of Origin, HSS ETC. Packed 10 per unit if less thank unit ordered will re-pack

Shanks are all marked With Cleveland Twist Drill LOGO
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$0.75
drill bit #36 Lh smd
Left Hand Screw Machine Length Drill Number 36 {.1065"} Diameter High Speed Steel Titex (Left Hand Screw Machine Drill)

Drill Diameter =#36 {.1065"} Tap Drill 6-32 Cut Tap

Flute Length = 13/16"

Overall Length = 1-13/16"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Gold in color

High Speed Steel

P/N =TITEX-A1131-36

Drills are NOT MARKED on shank Mfg, Country of Origin, HSS ETC. Packed 10 per unit if less thank unit ordered will re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$0.75
drill bit #40 Lh smd
Left Hand Screw Machine Length Drill Number 40 {.098"} Diameter High Speed Steel U.S.A. (Left Hand Screw Machine Drill)

Drill Diameter =#40 {.0980"}

Flute Length = 13/16"

Overall Length = 1-13/16"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Polished

High Speed Steel

P/N =NB-75 STD 16740

Drills are NOT MARKED on shank Mfg, Country of Origin, HSS ETC. Packed 10 per unit if less thank unit ordered will re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$0.75
drill bit #44 Lh smd
Left Hand Screw Machine Length Drill Number 44 {.086"} Diameter High Speed Steel Precision Twist Drill (Left Hand Screw Machine Drill)

Drill Diameter =#44 {.0860"}

Flute Length = 3/4"

Overall Length = 1-3/4"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Polished

High Speed Steel

P/N =NB-75 L41 PTD

Drills are NOT MARKED on shank Mfg, Country of Origin, HSS ETC. Packed 10 per unit if less thank unit ordered will re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$0.75
drill bit #3 Lh jld
Left Hand JOBBERS Length Drill Number 3 {.213"} Diameter High Speed Steel Cleveland Twist Drill (Left Hand Screw Machine Drill)

Drill Diameter =#3 {.2130"}

Flute Length = 2-1/2"

Overall Length = 3-3/4"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Polished

High Speed Steel

P/N =NB-75 01514 CTD

Drills are marked on shank Mfg, Country of Origin, HSS ETC. Packed 10 per unit if less thank unit ordered will re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.75
drill bit #4 Lh jld
Left Hand JOBBERS Length Drill Number 4 {.209"} Diameter High Speed Steel Cleveland Twist Drill (Left Hand Screw Machine Drill)

Drill Diameter =#4 {.209"}

Flute Length = 2-1/2"

Overall Length = 3-3/4"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Polished

High Speed Steel

P/N =NB-75 2006-0209 CTD

Drills are marked on shank Mfg, Country of Origin, HSS ETC. Packed 10 per unit if less thank unit ordered will re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.75
drill bit 7/32 Lh jld
Left Hand JOBBERS Length Drill 7/32" {.2188"} Diameter High Speed Steel Cleveland Twist Drill (Left Hand Screw Machine Drill)

Drill Diameter =7/32" {.2188"}

Flute Length = 2-1/2"

Overall Length = 3-3/4"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Polished

High Speed Steel

P/N =NB-75 2006-0218 CTD

Drills are marked on shank Mfg, Country of Origin, HSS ETC. Packed 10 per unit if less thank unit ordered will re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.50
drill bit #1 Lh jld
Left Hand JOBBERS Length Drill Number 1 {.228"} Diameter High Speed Steel Cleveland Twist Drill (Left Hand Screw Machine Drill)

Drill Diameter =#1 {.2280"}

Flute Length = 2-5/8"

Overall Length = 3-7/8"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Polished

High Speed Steel

P/N =NB-75 2005-0228 CTD

Drills are marked on shank Mfg, Country of Origin, HSS ETC. Packed 10 per unit if less thank unit ordered will re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$1.75
drill bit 15/64 Lh jld
Left Hand JOBBERS Length Drill 15/64" {.2344"} Diameter High Speed Steel Cleveland Twist Drill (Left Hand Screw Machine Drill)

Drill Diameter =15/64" {.2344"}

Flute Length = 2-5/8"

Overall Length = 3-7/8"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Polished

High Speed Steel

P/N =NB-75 01525 CTD

Drills are marked on shank Mfg, Country of Origin, HSS ETC. Packed 10 per unit if less thank unit ordered will re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.00
drill bit 5/16 Lh jld
Left Hand JOBBERS Length Drill 5/16" {.3125"} Diameter High Speed Steel Cleveland Twist Drill (Left Hand Screw Machine Drill)

Drill Diameter = 5/16" {.3125"} Tap Drill 3/8-16 Cut Tap

Flute Length = 3-3/16"

Overall Length = 4-1/2"

Standard LEFT HAND Helix

Drill Point = 118 Degree Not Split

Coating =Bright/Polished

High Speed Steel

P/N =NB-75 01561 CTD

Drills are marked on shank Mfg, Country of Origin, HSS ETC. Packed 10 per unit if less thank unit ordered will re-pack

Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand. Can use as screw extractor for drilling out broken studs or fasteners. The shorter rigid drill minimizes deflection when heavy feed rates are used. General Purpose drills suitable for most applications on a wide variety of materials
$2.50
Per Page      1 - 27 of 27
  • 1