3/16" Shanks

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}

Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application.

Square end for milling of slots, keyways and pockets.

Ball nose for contour slotting and contour finishing of die cavities, fillets, round bottom holes and radius bottoms.

Sort By:  
hs em .045 dia 2fl se unctd 3/16
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$2.50
hs em 7/64 2fl de stb ptnm
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 7/64 2fl de lng hanita
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 9/64 2fl de stb putnam
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 9/64 2fl de stb hanita
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 11/64 2fl de stb hanita
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 11/64 2fl de stb ptnm
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 11/64 2fl de reg usa
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 3/16 2fl de stb hanita
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 3/16 2fl de stb hanita c4mss
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 3/16 2fl de reg brwn tbe
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 3/16 2fl de lng hanita
Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 3/16 2fl de stb bn std tl
Applications = Miniature 3/16" shank end mills are designed for small diameter milling of die cavities, fillets, round bottom holes, and radius bottom slots. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$4.50
hs em 5/32 2fl de stb bn usa
Applications = Miniature 3/16" shank end mills are designed for small diameter milling of die cavities, fillets, round bottom holes, and radius bottom slots. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$4.50
hs em 5/32 2fl de reg bn usa
Applications = Miniature 3/16" shank end mills are designed for small diameter milling of die cavities, fillets, round bottom holes, and radius bottom slots. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$4.50
hs em 3/32 3fl de reg maf
Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 5/64X3/16SH 4fl de reg rchrds micro
Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 3/32X3/16SH 4fl de reg usa
Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 7/64X3/16SH 4fl de reg rchrds
Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 9/64X3/16SH 4fl de reg rchrds
Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 5/32x3/16
Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 3/16x3/16
Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em .045 dia 2fl se unctd 3/16
High Speed End Mill .045" Dia 3/16" Flute Length 2 Flute Single End Square Tin Coated (3/16" Shank High Speed Steel End Mill)

Diameter = .045

Shank Diameter = 3/16"

Flute Length = 3/16"

Overall Length = 1-1/2"

Number of Flutes = 2

End Type = Square

Center Cutting = Yes

Coating = Tin

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = OM-42 Out of original manufacturers packaging - Bought these in bulk deal

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$2.50
hs em 7/64 2fl de stb ptnm
High Speed End Mill 7/64" Dia {.1094"} 5/32" Flute Length 2 Flute Double End Stub Square Putnam (3/16" Shank High Speed Steel End Mill)

Diameter = 7/64"

Shank Diameter = 3/16"

Flute Length = 5/32"

Overall Length = 2"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = SB4A

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 7/64 2fl de lng hanita
High Speed End Mill 7/64" Dia {.1094"} 9/32" Flute Length 2 Flute Double End Square Long Putnam (3/16" Shank High Speed Steel End Mill)

Diameter = 7/64"

Shank Diameter = 3/16"

Flute Length = 9/32"

Overall Length = 2-5/8"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 1812-7/64

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 9/64 2fl de stb putnam
High Speed End Mill 9/64" Dia {.1406"} 7/32" Flute Length 2 Flute Double End Square Stub Putnam (3/16" Shank High Speed Steel End Mill)

Diameter = 9/64"

Shank Diameter = 3/16"

Flute Length = 7/32"

Overall Length = 2"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = SB5A

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 9/64 2fl de stb hanita
High Speed End Mill 9/64" Dia {.1406"} 7/32" Flute Length 2 Flute Double End Square Stub Hanita (3/16" Shank High Speed Steel End Mill)

Diameter = 9/64"

Shank Diameter = 3/16"

Flute Length = 7/32"

Overall Length = 2"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 1842-9/64

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 11/64 2fl de stb hanita
High Speed End Mill 11/64" Dia {.1719"} 1/4" Flute Length 2 Flute Double End Square Stub Hanita (3/16" Shank High Speed Steel End Mill)

Diameter = 11/64"

Shank Diameter = 3/16"

Flute Length = 1/4"

Overall Length = 2"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 1842-11/64

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 11/64 2fl de stb ptnm
High Speed End Mill 11/64" Dia {.1719"} 1/4" Flute Length 2 Flute Double End Square Stub Putnam (3/16" Shank High Speed Steel End Mill)

Diameter = 11/64"

Shank Diameter = 3/16"

Flute Length = 1/4"

Overall Length = 2"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = SB6A

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 11/64 2fl de reg usa
High Speed End Mill 11/64" Dia {.1719"} 1/2" Flute Length 2 Flute Double End Square Regular Lgth USA (3/16" Shank High Speed Steel End Mill)

Diameter = 11/64"

Shank Diameter = 3/16"

Flute Length = 1/2"

Overall Length = 2-1/4"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = KY50-011 Out of original packaging Marked on Shank Made in U.S.A.

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 3/16 2fl de stb hanita
High Speed End Mill 3/16" Dia {.1875"} 9/32" Flute Length 2 Flute Double End Square Stub Hanita (3/16" Shank High Speed Steel End Mill)

Diameter = 3/16"

Shank Diameter = 3/16"

Flute Length = 9/32"

Overall Length = 2"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 1842-3/16ST

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 3/16 2fl de stb hanita c4mss
High Speed End Mill 3/16" Dia {.1875"} 9/32" Flute Length 2 Flute Double End Square Stub (3/16" Shank High Speed Steel End Mill)

Diameter = 3/16"

Shank Diameter = 3/16"

Flute Length = 9/32"

Overall Length = 2"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = C4MSS-012

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 3/16 2fl de reg brwn tbe
High Speed End Mill 3/16" Dia {.1875"} 1/2" Flute Length 2 Flute Double End Square Regular Length (3/16" Shank High Speed Steel End Mill)

Diameter = 3/16"

Shank Diameter = 3/16"

Flute Length = 1/2"

Overall Length = 2-1/4"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = BRWN TBE

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 3/16 2fl de lng hanita
High Speed End Mill 3/16" Dia {.1875"} 1" Flute Length 2 Flute Double End Square Long Length Hanita (3/16" Shank High Speed Steel End Mill)

Diameter = 3/16"

Shank Diameter = 3/16"

Flute Length = 1"

Overall Length = 3-3/8"

Number of Flutes = 2

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 1812-3/16

Applications = Miniature 3/16" shank end mills are designed for small diameter milling. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$3.50
hs em 3/16 2fl de stb bn std tl
High Speed End Mill 3/32" Dia {.0938"} 5/32" Flute Length 2 Flute Double End Stub Ball Nose USA (3/16" Shank High Speed Steel End Mill)

Diameter = 3/32"

Shank Diameter = 3/16"

Flute Length = 5/32"

Overall Length = 2"

Number of Flutes = 2

End Type = Double / Ball Nose

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = STD Tool

Applications = Miniature 3/16" shank end mills are designed for small diameter milling of die cavities, fillets, round bottom holes, and radius bottom slots. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$4.50
hs em 5/32 2fl de stb bn usa
High Speed End Mill 5/32" Dia {.1562"} 15/64" Flute Length 2 Flute Double End Stub Ball Nose USA (3/16" Shank High Speed Steel End Mill)

Diameter = 5/32"

Shank Diameter = 3/16"

Flute Length = 15/64"

Overall Length = 2"

Number of Flutes = 2

End Type = Double / Ball Nose

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 010-bn stb These are out of original tubes shanks are stamped U.S.A.

Applications = Miniature 3/16" shank end mills are designed for small diameter milling of die cavities, fillets, round bottom holes, and radius bottom slots. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$4.50
hs em 5/32 2fl de reg bn usa
High Speed End Mill 5/32" Dia {.1562"} 7/16" Flute Length 2 Flute Double End Ball Nose Regular Length USA (3/16" Shank High Speed Steel End Mill)

Diameter = 5/32"

Shank Diameter = 3/16"

Flute Length = 7/16"

Overall Length = 2-1/4"

Number of Flutes = 2

End Type = Double / Ball Nose

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 010-bn reg These are out of original tubes shanks are stamped U.S.A.

Applications = Miniature 3/16" shank end mills are designed for small diameter milling of die cavities, fillets, round bottom holes, and radius bottom slots. For maximum rigidity, select the shortest possible length of cut for you application. Square end for milling of slots, keyways and pockets.
$4.50
hs em 3/32 3fl de reg maf
High Speed End Mill 3/32" Dia {.0938"} 9/32" Flute Length 3 Flute Double End Square Regular Length MA FORD (3/16" Shank High Speed Steel End Mill)

Diameter = 3/32"

Shank Diameter = 3/16"

Flute Length = 9/32"

Overall Length = 2-1/4"

Number of Flutes = 3

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 36401

Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 5/64X3/16SH 4fl de reg rchrds micro
High Speed End Mill 5/64" Dia {.0781"} 15/64" Flute Length 4 Flute Double End Square Regular Length Richards Micro (3/16" Shank High Speed Steel End Mill)

Diameter = 5/64"

Shank Diameter = 3/16"

Flute Length = 15/64"

Overall Length = 2-1/4"

Number of Flutes = 4

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 847-5/64

Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 3/32X3/16SH 4fl de reg usa
High Speed End Mill 3/32" Dia {.0938"} 15/64" Flute Length 4 Flute Double End Square Regular Length USA (3/16" Shank High Speed Steel End Mill)

Diameter = 3/32"

Shank Diameter = 3/16"

Flute Length = 15/64"

Overall Length = 2-1/4"

Number of Flutes = 4

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = USA-006 Marked on Shank U.S.A.

Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 7/64X3/16SH 4fl de reg rchrds
High Speed End Mill 7/64" Dia {.1094"} 5/16" Flute Length 4 Flute Double End Square Regular Length USA Richards (3/16" Shank High Speed Steel End Mill)

Diameter = 7/64"

Shank Diameter = 3/16"

Flute Length = 5/16"

Overall Length = 2-1/4"

Number of Flutes = 4

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 847-7/64

Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 9/64X3/16SH 4fl de reg rchrds
High Speed End Mill 9/64" Dia {.1406"} 3/8" Flute Length 4 Flute Double End Square Regular Length Richards (3/16" Shank High Speed Steel End Mill)

Diameter = 9/64"

Shank Diameter = 3/16"

Flute Length = 3/8"

Overall Length = 2-1/4"

Number of Flutes = 4

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 847-9/64

Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 5/32x3/16
High Speed End Mill 5/32" Dia {.1562"} 7/16" Flute Length 4 Flute Double End Square Regular Length Reiff&Nestor (3/16" Shank High Speed Steel End Mill)

Diameter = 5/32"

Shank Diameter = 3/16"

Flute Length = 7/16"

Overall Length = 2-1/4"

Number of Flutes = 4

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = 1595-5/32

Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
hs em 3/16x3/16
High Speed End Mill 3/16" Dia {.1875"} 9/32" Flute Length 4 Flute Double End Square Stub Length (3/16" Shank High Speed Steel End Mill)

Diameter = 3/16"

Shank Diameter = 3/16"

Flute Length = 9/32"

Overall Length = 2"

Number of Flutes = 4

End Type = Double / Square

Center Cutting = Yes

Coating = Uncoated

Helix Angle = 30 Degree

Right hand spiral/Cut

Manufacturers P/N = C4MSS

Applications = Miniature 3/16" shank end mills are designed for small diameter milling of slots, keyways and pockets. For maximum rigidity, select the shortest possible length of cut for you application.
$3.50
Per Page      1 - 22 of 22
  • 1