Iscar Tooling

All items are new in original manufacturer's packaging {unless otherwise noted}. Visuals are actual item{s}.

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}
Sort By:  
chamdrill tip .390 ic908
Chamdrill Insert .390" diameter IDI-0390SG Iscar grade IC908 $35.00 (Chamdrill insert)

Head diameter = .390"

Style = IDI-SG

Grade = IC908

Your Cost = $35.00

Iscar EDP# =

SG – for machining carbon and alloy steel.

Solid carbide

Coating = Tialn

Manufacturer's Part Number = IDI-0390SG

Grade IC908 =A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. These 2 pcs came as you view out of original manucaturer's packs they are etched on top of head with diameter

Applications = Indexable drilling
$35.00
chamdrill tip .472 ic528
Chamdrill Insert .472" diameter IDI-0472SG Iscar grade IC528 5504776 $35.00 (Chamdrill Insert)

Head diameter = .472"

Style = IDI-SG

Grade = IC528

Your Cost = $35.00

Iscar EDP# = 5504776

SG – for machining carbon and alloy steel.

Solid carbide

Coating = Tialn

Manufacturer's Part Number = IDI-0472SG

Grade IC 528 = A thin PVD coated TiCN layer on a tough substrate, for milling, drilling, parting and grooving on stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
chamdrill tip .484 ic528
Chamdrill Insert .484" diameter IDI-0484SG Iscar grade IC528 5504752 $35.00 (Chamdrill Insert)

Head diameter = .484"

Style = IDI-SG

Grade = IC528

Your Cost = $35.00

Iscar EDP# = 5504752

SG – for machining carbon and alloy steel.

Solid carbide

Coating = PVD

Manufacturer's Part Number = IDI-0484SG

Grade IC 528 = A thin PVD coated TiCN layer on a tough substrate, for milling, drilling, parting and grooving on stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
CHAMDRILL .0500  IC908
Chamdrill Insert .500" diameter IDI-0500SG Iscar grade IC908 5504897 $35.00 (Chamdrill Insert)

Head diameter = .500"

Style = IDI-SG

Grade = IC908

Your Cost = $35.00

Iscar EDP# = 5504897

SG – for machining carbon and alloy steel.

Solid carbide

Coating = Tialn

Manufacturer's Part Number = IDI-0500SG

Grade IC 908 = A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
CHAMDRILL .642 IC908
SumoCham drill Insert .642" diameter ICP-0642 Iscar grade IC908 5508474 $35.00 (Chamdrill Insert)

Head diameter = .642"

Style = SumoCham

Grade = IC908

Your Cost = $35.00

Iscar EDP# = 5508474

Solid carbide

Coating = Tialn

Manufacturer's Part Number = ICP-0642

Grade IC 908 = A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
CHAMDRILL .720 IC908
SumoCham drill Insert .720" diameter ICP-0720 Iscar grade IC908 5508598 $35.00 (Chamdrill Insert)

Head diameter = .720"

Style = SumoCham

Grade = IC908

Your Cost = $35.00

Iscar EDP# = 5508598

Solid carbide

Coating = Tialn

Manufacturer's Part Number = ICP-0720

Grade IC 908 = A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
CHAMDRILL .736 IC908
SumoCham drill Insert .736" diameter ICP-0736 Iscar grade IC908 5505236 $35.00 (Chamdrill Insert)

Head diameter = .736"

Style = SumoCham

Grade = IC908

Your Cost = $35.00

Iscar EDP# = 5505236

Solid carbide

Coating = Tialn

Manufacturer's Part Number = ICP-0736

Grade IC 908 = A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
CHAMDRILL .858 IC908 ICSAR
SumoCham drill Insert .858" diameter ICP-0858 Iscar grade IC908 5509113 $35.00 (Chamdrill Insert)

Head diameter = .858"

Style = SumoCham

Grade = IC908

Your Cost = $35.00

Iscar EDP# = 5509113

Solid carbide

Coating = Tialn

Manufacturer's Part Number = ICP-0858

Grade IC 908 = A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
CHAMDRILL .862 IC908 ICSAR
SumoCham drill Insert .862" diameter ICP-0862 Iscar grade IC908 5506651 $35.00 (Chamdrill Insert)

Head diameter = .862"

Style = SumoCham

Grade = IC908

Your Cost = $35.00

Iscar EDP# = 5509113

Solid carbide

Coating = Tialn

Manufacturer's Part Number = ICP-0862

Grade IC 908 = A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
CHAMDRILL .642 IC908 ISCAR
Chamdrill Insert .642" diameter IDI-0642SG Iscar grade IC908 $35.00 (Chamdrill Insert)

Head diameter = .642"

Style = IDI-SG

Grade = IC908

Your Cost = $35.00

SG – for machining carbon and alloy steel.

Solid carbide

Coating = Tialn

Manufacturer's Part Number = IDI-0642SG

IC 908 A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
CHAMDRILL .736 IC908 ISCAR
Chamdrill Insert .736" diameter IDI-0736SG Iscar grade IC908 5505236 $35.00 (Chamdrill Insert)

Head diameter = .736"

Style = IDI-SG

Grade = IC908

Your Cost = $35.00

Iscar EDP# = 5505236

SG – for machining carbon and alloy steel.

Solid carbide

Coating = Tialn

Manufacturer's Part Number = IDI-0736SG

IC 908 A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {4} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
CHAMDRILL .843 IC908 ISCAR
Chamdrill Insert .843" diameter IDI-0843SG Iscar grade IC908 5505606 $35.00 (Chamdrill Insert)

Head diameter = .843"

Style = IDI-SG

Grade = IC908

Your Cost = $35.00

Iscar EDP# = 5505606

SG – for machining carbon and alloy steel.

Solid carbide

Coating = Tialn

Manufacturer's Part Number = IDI-0843SG

IC 908 A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
CHAMDRILL .843 IC908 ISCAR
Chamdrill Insert .866" diameter IDI-0866SG Iscar grade IC908 5505174 $35.00 (Chamdrill Insert)

Head diameter = .866"

Style = IDI-SG

Grade = IC908

Your Cost = $35.00

Iscar EDP# = 5505174

SG – for machining carbon and alloy steel.

Solid carbide

Coating = Tialn

Manufacturer's Part Number = IDI-0866SG

IC 908 A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
MULTI MASTER 12MM HD IC908
Multi Master Solid carbide Milling Head 12MM {.4724"} Iscar Grade IC908 MM-EC120B09RO.5 EDP#5698841 35.00 (Chamdrill Insert)

Head diameter = 12MM .4724"

Style = Multi Master

Grade = IC908

Your Cost = $35.00

Iscar EDP# = 5698841

Radius = .5

Solid carbide

Coating = Tialn

Manufacturer's Part Number = MM-EC120B09R0.5-6T 08

Number of Flutes = 6 which are variable with 45 Deg Helix

Length of Cut = 9MM {.3543"}

Body Length = 16.5MM {.6496"}

TS Shank = 8

IC 908 A hard, fine grain substrate with excellent chipping resistance, combined with a TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Packed {2} per unit will re-pack securely if less than unit required

Applications = Indexable drilling
$35.00
chamdrill .787-823 8xd iscar
Chamdrill .787-.823" Range 8X Diameter 1" Straight Shank Diameter Coolant Thru Iscar 3200967 (Chamdrill )

Range Diameter = .787 - .823"

Flute Length = 6.300"

Overall Length = 9.560"

Shank Diameter = 1" Straight / Flat on Shank

Flange Diameter = 1.260"

Coolant Thru = Yes

Number of Flutes = 2 Right Hand Spiral

Iscar EDP# = 3200967

Iscar Part Number = DCM-0787-630-100A-8D
Applications = Indexable drilling
$175.00
chamdrill .827-862 8xd iscar
Chamdrill .827-.862" Range 8X Diameter 1" Straight Shank Diameter Coolant Thru Iscar 3201412 (Chamdrill )

Range Diameter = .827 - .862"

Flute Length = 6.620"

Overall Length = 9.920"

Shank Diameter = 1" Straight / Flat on Shank

Flange Diameter = 1.260"

Coolant Thru = Yes

Number of Flutes = 2 Right Hand Spiral

Iscar EDP# = 3201412

Iscar Part Number = DCM-0827-6620-100A-8D
Applications = Indexable drilling
$175.00
iscar SGTHL-19-4
Iscar Parting and Grooving Holder SGTHL-19-4 Left Hand Accepts GT_-4 Series Insert (Parting and Grooving Holder)

Holder Width = 1/2"

Holder Height = 3/4"

Overall Length = 4.330"

Accepts GT_-4

Insert Width = .161"

Iscar Number = SGTHL-19-4

T-cut series Insert

NOTE: F-CUT and T-CUT inserts are not interchangeable with F-CUT and T-CUT blades.

Comes with the L- Shape knock out insert wedge
Applications = Parting and Grooving
$34.00
iscar SGIHL32-9
Iscar Parting and Grooving Blade SGIHL-32-9 Left Hand Accepts GT_-9 Series Insert (Parting and Grooving Holder)

Blade Width/Thickness = 5/16"

Blade Height = 1-1/4"

Center Height = .980"

Overall Length = 5.900"

Accepts GT_-9

Insert Width = .375" {3/8"}

Maximum Depth = 4.720"

T-cut series Insert

Iscar Number = SGIHL-32-9 EDP# 230067

Interchangable Iscar Blades for your D-Grip Blocks and Inserts. NOTE: F-CUT and T-CUT inserts are not interchangeable with F-CUT and T-CUT blades.

Comes with the L- Shape knock out insert wedge

Applications = Parting and Grooving
$48.00
iscar SGTHL-25.4-5
Iscar Parting and Grooving Holder SGTHL-25.4-5 Left Hand Accepts GT_-4.8 and 5 Series Insert (Parting and Grooving Holder)

Holder = 1" Square Shank

Overall Length = 5.900"

Maximum Depth = 3"

Accepts GT_-4.8 and 5

Insert Width = .189 & .201"

Iscar Number = SGTHL-25.4-5

T-cut series Insert

NOTE: F-CUT and T-CUT inserts are not interchangeable with F-CUT and T-CUT blades.

Comes with the L- Shape knock out insert wedge
Applications = Parting and Grooving
$67.00
Per Page      1 - 19 of 19
  • 1