Solid Carbide Drill Long

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}
Sort By:  
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$12.50
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$12.50
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$14.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$16.00
Uses = Recommended to run in high nickel, high temperature alloys, cobalt-based alloys, stainless steels and tool steels Balinit® HELICA is a multi-layer AlCr-based coating designed exclusively for high performance drilling
$14.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$15.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$22.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$26.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$28.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$22.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$24.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$28.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$25.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$29.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$28.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$26.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$28.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$28.00
Uses - Capable of producing reamer type finishes in materials 42-65rc. Produces chips without generating excessive heat. Accurate hole size without annealing or softening your workpiece.
$72.00
Solid Carbide Drill {.0781"} 5/64" Diam Uncoated Long Parabolic Flute Guhring (Long parabolic carbide drill)

Diameter = 5/64"

Decimal = .0781"

Flute Length = 2-1/2"

Overall Length = 6"

Flute geometry = Parabolic - Right Hand

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 46942 C18001-0781-C

Original Manufacturers Packaging

Note: This item bulk packed 10 per unit will re-pack {and protect well} if less than 10 requested
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$12.50
Solid Carbide Drill {.1719"} 11/64" Diam Uncoated Parabolic Flute 4" OAL Guhring (Long parabolic carbide drill)

Diameter = 11/64"

Decimal = .1719"

Flute Length = 2-1/4"

Overall Length = 4"

Flute geometry = Parabolic

Point geometry = 118 Degree

Coating = uncoated

Right hand helix

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 46928 C18001-1719-C

Original Manufacturers Packaging

Note: This item bulk packed 10 per unit will re-pack {and protect well} if less than 10 requested

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$12.50
Solid Carbide Drill {.1719"} 11/64" Diam Uncoated Parabolic Flute 5" OAL Guhring (Long parabolic carbide drill)

Diameter = 11/64"

Decimal = .1719"

Flute Length = 2-1/4"

Overall Length = 5"

Flute geometry = Parabolic Right hand helix

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 46929 C18001-1719-C

Original Manufacturers Packaging

Note: This item bulk packed 10 per unit will re-pack {and protect well} if less than 10 requested
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$14.00
Solid Carbide Drill {.1719"} 11/64" Diam Uncoated Parabolic Flute 6" OAL Guhring (Long parabolic carbide drill)

Diameter = 11/64"

Decimal = .1719"

Flute Length = 2-1/4"

Overall Length = 6"

Flute geometry = Parabolic

Point geometry = 118 Degree

Coating = uncoated

Right hand helix

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 46930 C18001-1719-C

Original Manufacturers Packaging

Note: This item bulk packed 10 per unit will re-pack {and protect well} if less than 10 requested

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$16.00
Solid Carbide Drill .1850" Diameter x 2-5/16" Fl Lgth x 6" Overall Uncoated USA (Long carbide drill)

Diameter = .185"

Decimal = .185"

Flute Length = 2-5/16"

Overall Length = 6"

Flute geometry = Right Hand

Point geometry = 140 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 23622

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$22.00
Solid Carbide Drill {.1875"} 3/16" Diam x 1-1/2" Fl Lgth x 4-7/8" Overall Uncoated USA (Long carbide drill)

Diameter = 3/16"

Decimal = .1875"

Flute Length = 1-1/2"

Overall Length = 4-7/8"

Flute geometry = Right Hand

Point geometry = 118 Degree Split

Right hand helix

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N BLCP-12L

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$16.00
Solid Carbide Drill .1905" Diam x 3" Fl Lgth x 6" Overall Lenght Uncoated USA (Long carbide drill)

Diameter = .1905"

Decimal = .1905"

Flute Length = 3"

Overall Length = 6"

Flute geometry = Right Hand

Point geometry = 118 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 629740

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$22.00
Solid Carbide Drill {.1969"} 5MM Dia x 5.960" Fl Lgth x 7-11/16" Oal Unctd Straight Flute Coolant Thru USA (Long carbide drill coolant thru)

Diameter = 5MM

Decimal = .1969"

Flute Length = 5.960"

Overall Length = 7-11/16"

Shank Dia = 6MM {.2362"}

Flute geometry = Straight Flute Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N JK01150401

Original Manufacturers Packaging

Note: Manufacturer has mislabeled and marked as carbide tipped - This item is solid carbide
Uses = General purpose deep hole drilling
$38.00
Solid Carbide Drill {.2031} 13/64" Diam x 2-1/2" Fl Lgth x 5" Overall Helica Ctd Garr Tool (Long carbide drill)

Diameter = 13/64"

Decimal = .2031"

Garr Tool has marked label Diameter .2031" - .2026" and drill back tapers to the .2026" which will allow chips to evacuate.

Flute Length = 2-1/2"

Overall Length = 5"

Flute geometry = Right Hand

Point geometry = 120 Degree Split

Coating = Helica Balinit® HELICA is a multi-layer AlCr-based coating designed exclusively for high performance drilling

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 3593001

Original Manufacturers Packaging
Uses = Recommended to run in high nickel, high temperature alloys, cobalt-based alloys, stainless steels and tool steels Balinit® HELICA is a multi-layer AlCr-based coating designed exclusively for high performance drilling
$14.00
Solid Carbide Drill {.2344"} 15/64" Uncoated 3 Flute Titanium/Aluminum Fullerton (Solid Carbide Jobbers Drill)

Diameter = 15/64"

Decimal = .2344"

Flute Length = 2"

Overall Length = 4-1/2"

Number of Flutes = 3

Point geometry = 140 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N Z597561

Original Manufacturers Packaging

Uses = Aluminum,Titanium
$18.00
Solid Carbide Drill {.2344"} 15/64" Diam x 3" Flute Lgth x 6" Overall Uncoated USA (Long carbide drill)

Diameter = 15/64"

Decimal = .2344"

Flute Length = 3"

Overall Length = 6"

Flute geometry = Right Hand

Point geometry = 135 Degree Split

Solid C-2 grade premium sub-micron grain carbide

Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 2344

Original Manufacturers Packaging

Uses = General purpose drilling
$26.00
Solid Carbide Drill Long {.2344"} 15/64" Diam x 1-1/2" Flute Lgth x 10" Overall Uncoated USA (Long carbide drill)

Diameter = 15/64"

Decimal = .2344"

Flute Length = 1-1/2"

Overall Length = 10"

Flute geometry = Right Hand

Point geometry = 135 Degree Split

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 32657

Original Manufacturers Packaging

Uses = General purpose drilling
$48.00
Solid Carbide Drill {.2362"} 6MM Dia x .5-1/2" Fl Lgth x 7-3/16" Oal Unctd Straight Flute Coolant Thru USA (Long carbide drill coolant thru)

Diameter = 6MM

Decimal = .2362"

Flute Length = 5-1/2"

Overall Length = 7-13/16"

Shank Dia = 6MM {.2362"}

Flute geometry = Straight Flute Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N JK01150402

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$44.00
Solid Carbide Long Drill {.242"} Ltr "C" Long Uncoated Parabolic Flute 3 Flats on Shank Guhring (Solid Carbide Long Parabolic Drill)

Diameter = Ltr "C"

Decimal = .242"

Flute Length = 3-3/4"

Overall Length = 6"

{3 Flats on Shank}

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 47572 Original Manufacturers Packaging
Uses = Aluminum,Titanium
$28.00
Solid Carbide Long Drill {.250"} 1/4" Dia x 4" Long Uncoated Parabolic Flute 3 Flats on Shank Guhring (Solid Carbide Long Parabolic Drill)

Diameter = 1/4"

Decimal = .250"

Flute Length = 2"

Overall Length = 4"

{3 Flats on Shank}

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 47576

Original Manufacturers Packaging

Note: Item came bulked pack 10 per unit will securely re-pack
Uses = Aluminum,Titanium
$16.00
Solid Carbide Drill {.250"} 1/4" Dia x 5" OAL Uncoated Parabolic Flute 3 Flats on Shank Guhring (Solid Carbide Long Parabolic Drill)

Diameter = 1/4"

Decimal = .250"

Flute Length = 2-1/4"

Overall Length = 5"

{3 Flats on Shank}

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 47577

Original Manufacturers Packaging

Note: Item came bulk packed 10 per unit will securely re-pack if less than unit requested
Uses = Aluminum,Titanium
$22.00
Solid Carbide Long Drill .2502"x6" OAL Uncoated Parabolic Flute Design U.S.A. (Long Solid Carbide Drill)

Diameter = .2502"

Decimal = .2502"

Flute Length = 2"

Overall Length = 6"

Point geometry = 118 Degree Split

Right hand cut

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 03-29236

Original Manufacturers Packaging

Note: This drill has a pilot diameter of 15/64" {.2344"} for a length of 3/16"

Uses = Aluminum,Titanium
$28.00
Solid Carbide Drill Long {.257"} Ltr "F"x5" OAL Uncoated Parabolic Flute 3 Flats on Shank Guhring (Long Solid Carbide Drill)

Diameter = Ltr "F"

Decimal = .257"

Flute Length = 2-3/4"

Overall Length = 5"

3 Flats on Shank

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 47583

Original Manufacturers Packaging Note: Item came bulk packed 10 per unit will securely re-pack

Uses = Aluminum,Titanium
$24.00
Solid Carbide Long Drills {.250"} 1/4" Dia x 6" OAL Uncoated USA (Long Solid Carbide Drill)

Diameter = 1/4"

Decimal = .250"

Flute Length = 2-3/4"

Overall Length = 6"

Point geometry = 135 Degree Split

Right hand cut

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N F64656

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$15.00
Solid Carbide Long Drills {.261"} Ltr "G"x6" OAL Uncoated Parabolic Flute 3 Flats on Shank USA (Long Solid Carbide Drill)

Diameter = Ltr "G"

Decimal = .261"

Flute Length = 3-1/2"

Overall Length = 6"

3 Flats on Shank

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 645216

Original Manufacturers Packaging

Uses = Aluminum,Titanium
$16.00
Solid Carbide Drill {.2756"} 7MM Dia x 4-7/8" Fl Lgth x 6-7/8" Oal Unctd Straight Flute Coolant Thru USA (Long carbide drill coolant thru)

Diameter = 7MM

Decimal = .2756"

Flute Length = 4-7/8"

Overall Length = 6-7/8"

Shank Dia = 8MM {.315"}

Flute geometry = Straight Flute Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N EMP90KS107MM

Original Manufacturers Packaging

Note: Manufacturer has mislabeled and marked as carbide tipped - This item is solid carbide

Uses = General purpose deep hole drilling
$44.00
Solid Carbide Long Drill {.2656"} 17/64" Dia x 4" Long Uncoated Parabolic Flute 3 Flats on Shank TSC/USA (Solid Carbide Long Parabolic Drill)

Diameter = 17/64"

Decimal = .2656"

Flute Length = 2-1/4"

Overall Length = 4"

{3 Flats on Shank}

Shank Diameter = .260"

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N c18001-2656A

Original Manufacturers Packaging
Uses = Aluminum,Titanium
$16.00
Solid Carbide Long Drill {.2656"} 17/64" Dia x 5" Long Uncoated Parabolic Flute 3 Flats on Shank TSC/USA (Solid Carbide Long Parabolic Drill)

Diameter = 17/64"

Decimal = .2656"

Flute Length = 2-3/4"

Overall Length = 5"

{3 Flats on Shank}

Shank Diameter = .260"

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N c18001-2656B

Original Manufacturers Packaging
Uses = Aluminum,Titanium
$18.00
Solid Carbide Drill Long {.2969"} 19/64" x 2-3/8" Fl Lgth x 5-1/2" Overall Uncoated USA (Long carbide drill)

Diameter = 19/64"

Decimal = .2969"

Flute Length = 2-3/8"

Overall Length = 5-1/2"

Flute geometry = Right Hand

Point geometry = 118 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 101189

Original Manufacturers Packaging

Uses = General purpose deep hole drilling
$22.00
Solid Carbide Drill {.302"} LETTER "N" Diam Uncoated 5" Overall Lgth Parabolic Flute TSC/USA (Long parabolic carbide drill)

Diameter = LETTER "N"

Decimal = .302"

Flute Length = 2-3/4"

Overall Length = 5"

3 Flats on Shank

Shank Diameter= .260" F

lute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-302B

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$15.00
Solid Carbide Drill {.3125"} 5/16" Diam Uncoated 5" Overall Lgth Parabolic Flute TSC/USA (Long parabolic carbide drill)

Diameter = 5/16"

Decimal = .3125"

Flute Length = 2-3/4"

Overall Length = 5"

3 Flats on Shank

Shank Diameter= .260"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-3125B

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$22.00
Solid Carbide Drill {.3125"} 5/16" Diam Uncoated 6" Overall Lgth Parabolic Flute TSC/USA (Long parabolic carbide drill)

Diameter = 5/16"

Decimal = .3125"

Flute Length = 3-3/4"

Overall Length = 6"

3 Flats on Shank

Shank Diameter= .260"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-3125C

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$26.00
Solid Carbide Drill X-Long {.3125"} 5/16" x 4-3/4" Fl Lgth x 10" Overall Uncoated USA (Long carbide drill)

Diameter = 5/16"

Decimal = .3125"

Flute Length = 4-3/4"

Overall Length = 10"

Flute geometry = Right Hand

Point geometry = 118 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 510-3125

Original Manufacturers Packaging

Uses = General purpose deep hole drilling
$66.00
Solid Carbide Drill X-Long {.3189"} 8.1MM x 125mm Fl Lgth x 200mm Overall Parabolic Uncoated OSG (Long carbide drill)

Diameter = 8.1MM

Decimal = .3189"

Flute Length = 125mm {5"}

Overall Length = 200mm {8"}

Flute geometry = Parabolic Right Hand

Point geometry = 140 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 219-2449

Original Manufacturers Packaging

Uses = General purpose deep hole drilling
$42.00
Solid Carbide Drill {.3438"} 11/32" Diam Uncoated 6" Overall Lgth Parabolic Flute TSC USA (Long parabolic carbide drill)

Diameter = 11/32"

Decimal = .3438"

Flute Length = 3-3/4"

Overall Length = 6"

3 Flats on Shank

Shank Diameter= .260"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-3438C

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$28.00
Solid Carbide Drill {.3438"} 11/32" Diam Uncoated 5" Overall Lgth Parabolic Flute TSC USA (Long parabolic carbide drill)

Diameter = 11/32"

Decimal = .3438"

Flute Length = 2-3/4"

Overall Length = 5"

3 Flats on Shank

Shank Diameter= .260"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-3438B

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$22.00
Solid Carbide Drill {.3594"} 23/64" Diam Uncoated 5" Overall Lgth Parabolic Flute TSC USA (Long parabolic carbide drill)

Diameter = 23/64"

Decimal = .3594"

Flute Length = 2-3/4"

Overall Length = 5"

3 Flats on Shank

Shank Diameter= .260"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-3594B

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$24.00
Solid Carbide Drill {.3594"} 23/64" Diam Uncoated 6" Overall Lgth Parabolic Flute TSC USA (Long parabolic carbide drill)

Diameter = 23/64"

Decimal = .3594"

Flute Length = 3-3/4"

Overall Length = 6"

3 Flats on Shank

Shank Diameter= .260"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-3594C

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$28.00
Solid Carbide Drill X-Long {.3594"} 23/64" x 2-1/2" Fl Lgth x 5-7/16" Overall Uncoated USA (Long carbide drill)

Diameter = 23/64"

Decimal = .3594"

Flute Length = 2-1/2"

Overall Length = 5-7/16"

Flute geometry = Right Hand

Point geometry = 118 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 101190

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$26.00
Solid Carbide Drill X-Long {.3594"} 23/64" x 2-1/2" Fl Lgth x 5-7/16" Overall Uncoated USA ( Copy ) (Long carbide drill)

Diameter = 23/64"

Decimal = .3594"

Flute Length = 2-1/2"

Overall Length = 5-7/16"

Point geometry = 118 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 101190

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$26.00
Solid Carbide Drill {.375"} 3/8" Diam Uncoated 5" Overall Lgth Parabolic Flute TSC USA (Long parabolic carbide drill)

Diameter = 3/8"

Decimal = .375"

Flute Length = 2-3/4"

Overall Length = 5"

3 Flats on Shank

Shank Diameter= 3/8"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-375B

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$25.00
Solid Carbide Drill {.375"} 3/8" Diam Uncoated 6" Overall Lgth Parabolic Flute TSC USA (Long parabolic carbide drill)

Diameter = 3/8"

Decimal = .375"

Flute Length = 3-3/4"

Overall Length = 6"

3 Flats on Shank

Shank Diameter= 3/8"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-375C

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$29.00
Solid Carbide Drill {.3858"} 9.8MM Tialn Coated Hi Tuff Design Spie Tool USA (Solid Carbide Jobbers Drill Hi Tuff)

Diameter = 9.8MM

Decimal = .3858"

Flute Length = 1-3/4"

Overall Length = 5"

Shank Diameter = 13/32" {.4062"}

Point geometry = 140 Degree Notched

Right hand cut

Coating = Tialn

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N W02969B Tialn

Original Manufacturers Packaging

Uses - Stainless Steels, Nickel, Titanium
$38.00
Solid Carbide Drill {.3858"} 9.8MM Uncoated Hi Tuff Design Spie Tool USA (Solid Carbide Jobbers Drill Hi Tuff)

Diameter = 9.8MM

Decimal = .3858"

Flute Length = 1-3/4"

Overall Length = 5"

Shank Diameter = 13/32" {.4062"}

Point geometry = 140 Degree Notched

Right hand cut

Coating = Tialn

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N W02969B

Original Manufacturers Packaging
Uses - Stainless Steels, Nickel, Titanium
$32.00
Solid Carbide Drill Long {.3906"} 25/64" Dia x 2-3/16" Fl Lgth x 9-1/12" Oal Tin Ctd Straight Flute Coolant Thru USA (Long carbide drill coolant thru)

Diameter = 25/64"

Decimal = .3906"

Flute Length = 2-3/16"

Overall Length = 9-1/2"

Flute geometry = Straight Flute Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 910-410C

Original Manufacturers Packaging

Uses = General purpose deep hole drilling
$38.00
Solid Carbide Drill Long {.408"} .408" x 5-1/4" Fl Lgth x 7-1/8" Overall Uncoated Garr Tool (Long carbide drill)

Diameter = .408"

Decimal = .408"

Flute Length = 5-1/4"

Overall Length = 7-1/8"

Flute geometry = Right Hand

Point geometry = 135 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N CE232PR

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$44.00
Solid Carbide Drill {.4219"} 27/64" Diam Uncoated 5.900" Overall Lgth Parabolic Flute TSC USA (Long parabolic carbide drill)

Diameter = 27/64"

Decimal = .4219"

Flute Length = 3-7/16"

Overall Length = 5.900"

3 Flats on Shank

Shank Diameter= .375" 3/8"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-4219C

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$28.00
Solid Carbide Drill {.4375"} 7/16" Diam Uncoated 5" Overall Lgth Parabolic Flute TSC USA (Long parabolic carbide drill)

Diameter = 7/16"

Decimal = .4375"

Flute Length = 2-5/8"

Overall Length = 5"

3 Flats on Shank

Shank Diameter= .375" 3/8"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-4375B

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$26.00
Solid Carbide Drill {.4375"} 7/16" Diam Uncoated 6" Overall Lgth Parabolic Flute TSC USA (Long parabolic carbide drill)

Diameter = 7/16"

Decimal = .4375"

Flute Length = 3-1/2"

Overall Length = 6"

3 Flats on Shank

Shank Diameter= .375" 3/8"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-4375C

Original Manufacturers Packaging

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$28.00
Solid Carbide Drill {.4375"} 7/16" Diam Uncoated 6" Overall Lgth Parabolic Flute TSC USA (Long parabolic carbide drill)

Diameter = 7/16"

Decimal = .4375"

Flute Length = 3-1/2"

Overall Length = 6"

3 Flats on Shank

Shank Diameter= .375" 3/8"

Flute geometry = Parabolic Right hand cut

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N C18001-4375C

Original Manufacturers Packaging
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$28.00
Solid Carbide Drill {.4585"} .4585" Dia x 3" Fl Lgth x 9-1/2" Oal Tin Coated Straight Flute Coolant Thru USA (Long carbide drill coolant thru)

Diameter = .4585"

Flute Length = 3"

Overall Length = 9-1/2"

Flute geometry = Straight Flute Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Tin Coated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 910-410D

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$78.00
Solid Carbide Drill {.4646"} 11.8MM Dia Uncoated Long Coolant Thru USA (Coolant thru solid carbide drill)

Diameter = 11,8MM

Decimal = .4646"

Flute Length = 3-1/8"

Overall Length = 6-1/2"

Tang On Shank

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 461697752

Original Manufacturers Packaging
Uses = Steels, Stainless Steels
$58.00
Solid Carbide Drill {.4375"} 7/16" Diam Hi Roc Hard Materials 42-65RC AMAMCO USA (Solid Carbide Drill)

Diameter = 7/16"

Decimal = .4375"

Flute Length = 3"

Overall Length = 9"

Point geometry = 135 Deg Split

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N #4096479-712 PT241 A

Original Manufacturers Packaging
Uses - Capable of producing reamer type finishes in materials 42-65rc. Produces chips without generating excessive heat. Accurate hole size without annealing or softening your workpiece.
$72.00
Per Page      1 - 48 of 48
  • 1