Solid Carbide Drill

Visuals are actual item{s} unless otherwise noted

The solid carbide drills in this section are for various materials, non-ferrous, non metallic, stainless steels, titaniums, wasp-alloy etc

Each individual item is described for it's specific use.

Sort By:  
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.00
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.00
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.75
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.75
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$2.75
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$2.75
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials, Steels
$8.00
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.00
drl sc 3/32 mitsu
Uses - Carbon, Mild, High Hardened, Stainless Steels, Ductile and Grey Cast Irons
$14.00
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.75
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.75
Uses - Aluminum, Cast Iron, Non-ferrous, Abrasive Materials
$3.25
Uses - Stainless Steels, Titanium, Mild Steels
$14.00
Uses - Capable of producing reamer type finishes in work hardened and abrasive materials, Hard Materials, Chrome Alloys, Titanium Alloys, Heat Treated Alloys, Nickel Alloys, Steel and Stainless Weldments
$3.50
Uses - Capable of producing reamer type finishes in work hardened and abrasive materials, Hard Materials, Chrome Alloys, Titanium Alloys, Heat Treated Alloys, Nickel Alloys, Steel and Stainless Weldments
$3.50
Uses = Aluminum,Composites,Graphite, Abrasive Non-Ferrous Materials
$6.00
Uses - Non-Ferrous alloys, Cast Iron, Plastics, Aluminum, Highly abrasive materials
$1.75
Uses - Non-Ferrous alloys, Cast Iron, Plastics, Aluminum, Highly abrasive materials
$3.25
Uses - Non-Ferrous alloys, Cast Iron, Plastics, Aluminum, Highly abrasive materials
$3.25
Uses - High Temp Alloys, Nickel, Stainless Steels, Cobalt Based Alloys, Tool Steels- High Performance-High Penetration
$14.00
Uses - Steels, Stainless Steels, Abrasive Materials
$3.50
Uses - Steels, Stainless Steels, Abrasive Materials
$6.00
Uses - Steels, Stainless Steels, Abrasive Materials
$4.50
Uses - High Temp Alloys, Nickel, Stainless Steels, Cobalt Based Alloys, Tool Steels- High Performance-High Penetration
$14.80
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$12.50
Uses - Capable of producing reamer type finishes in work hardened and abrasive materials such as Chrome alloys, heat treated alloys, nickel alloys, titanium alloys, steel and steel weldments This type drill is designed specifically for these materials - Increased edge strength & precision tolerance holes
$8.00
Uses - Non-Ferrous Alloys, cast iron, plastics, aluminum and highly abrasive materials
$4.00
Uses - Composites, Fiber Glass, Non-ferrous, Non-metallics
$6.50
Uses - High Temp Alloys, Nickel, Stainless Steels, Cobalt Based Alloys, Tool Steels- High Performance-High Penetration
$14.75
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$12.50
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$14.00
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$16.00
Uses = Aluminum,Composites,Graphite, Abrasive Non-Ferrous Materials
$10.00
Uses - Capable of producing reamer type finishes in materials 42-65rc. Produces chips without generating excessive heat. Accurate hole size without annealing or softening your workpiece.
$12.00
Uses - Stainless Steels, Nickel, Titanium, Tool Steels and high strength ferrous metals
$14.00
Uses - Capable of producing reamer type finishes in work hardened and abrasive materials such as Chrome alloys, heat treated alloys, nickel alloys, titanium alloys, steel and steel weldments This type drill is designed specifically for these materials - Increased edge strength & precision tolerance holes
$8.00
Uses - High Temp Alloys, Nickel, Stainless Steels, Cobalt Based Alloys, Tool Steels- High Performance-High Penetration
$15.00
Solid Carbide Jobbers Drill {.0312} 1/32" Diameter Uncoated Monster Tool Made in USA ( Solid Carbide Jobbers Drill )

Diameter =1/32"

Decimal = .0312"

Flute Length = 5/16" {.3125"}

Overall Length = 1-1/4"

Point geometry = 118 deg

Coating = uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 450-100312

Original Manufacturers Packaging

Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.00
Solid Carbide Jobbers Drill {.0312} 1/32" Diameter Uncoated Titan USA (Solid Carbide Jobbers Drill)

Diameter = 1/32"

Decimal = .0312"

Flute Length = 5/16"

Overall Length = 1-1/4"

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N TC19002

Original Manufacturers Packaging

Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.00
Solid Carbide Jobbers Drill {.040"} #60 Uncoated Cleveland Twist Drill Made in USA (Solid Carbide Jobbers Drill)

Diameter = #60

Decimal = .040"

Flute Length = 3/4"

Overall Length = 1-1/2"

Point geometry = 118 Degree

Coating = uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 47499 {414-160}

Original Manufacturers Packaging

Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.75
Solid Carbide Jobbers Drill {.0465"} #56 Uncoated MA FORD Made in USA (Solid Carbide Jobbers Drill)

Diameter = #56

Decimal = .040"

Flute Length = 3/4"

Overall Length = 1-1/2"

Point geometry = 118 Degree

Coating = uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 24133

Original Manufacturers Packaging

Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.75
Solid Carbide Jobbers Drill {.1065"} #36 Hardlube Coated Garr Tool Series 1205H (Solid Carbide Jobbers Drill)

Diameter = #36

Decimal = .1065"

Flute Length = 1-1/4"

Overall Length = 2-1/4"

Point geometry = 140 Degree Split

Right hand cut

Coating = Hardlube

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 89271

Original Manufacturers Packaging
Uses - Stainless Steels, Titanium, Mild Steels
$7.00
Solid Carbide Jobbers Drill {.0730"} #49 Uncoated Monster USA (Solid Carbide Jobbers Drill)

Diameter = #49

Decimal = .0730"

Flute Length = 7/8"

Overall Length = 1-3/4"

Point geometry = 118 Degree

Coating = uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 450-300730

Original Manufacturers Packaging

Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$2.75
Solid Carbide Jobbers Drill {.0860"} #44 Uncoated Hertel USA (Solid Carbide Jobbers Drill)

Diameter = #44

Decimal = .0860"

Flute Length = 1"

Overall Length = 2"

Point geometry = 118 Degree

Coating = uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 79891933

Original Manufacturers Packaging

Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$2.75
Solid Carbide Jobbers Drill {.0906"} 2.3MM Firex Coated Guhring Germany (Solid Carbide Jobbers Drill)

Diameter = 2.3MM

Decimal = .0906"

Flute Length = .512"

Overall Length = 1.575"

Point geometry = 135 Degree Split

Coating = Firex

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 403093352338

Original Manufacturers Packaging

Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials, Steels
$8.00
Solid Carbide Jobbers Drill {.0938"} 3/32" Uncoated Monster Tool USA (Solid Carbide Jobbers Drill)

Diameter = 3/32"

Decimal = .0938"

Flute Length = 1"

Overall Length = 2"

Point geometry = 118 Degree

Coating = uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 450-100938

Original Manufacturers Packaging

Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.00
drl sc 3/32 mitsu
Solid Carbide Jobbers Drill {.0938"} 3/32" Tialn Coated Mitsubishi Hi Performance MZE Series (Solid Carbide Jobbers Drill)

Diameter = 3/32"

Decimal = .0938"

Flute Length = 11/16"

Overall Length = 2-3/16"

Shank Diameter = 1/8"

Point geometry = 140 Degree Split

Right hand cut

Coating = Tialn

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N MZE00938

Original Manufacturers Packaging

Uses - Carbon, Mild, High Hardened, Stainless Steels, Ductile and Grey Cast Irons
$14.00
Solid Carbide Jobbers Drill {.1094"} 7/64" Uncoated Ostrem Tool USA (Solid Carbide Jobbers Drill)

Diameter = 7/64"

Decimal = .1094"

Flute Length = 1-1/4""

Overall Length = 2-1/4"

Point geometry = 118 Degree

Coating = uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

25 Degree Right hand helix/cut

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 109-WA110

Original Manufacturers Packaging

Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.75
Solid Carbide Jobbers Drill {.1110"} #34 Uncoated Faspiral Atrax USA (Solid Carbide Jobbers Drill)

Diameter = #34

Decimal = .1110"

Flute Length = 1-1/4""

Overall Length = 2-1/4"

Right hand cut

Point geometry = 118 Degree

Coating = uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 34-1811

Original Manufacturers Packaging
Uses - Aluminum, Cast Iron, Non-ferrous Materials, Highly Abrasive Materials
$3.75
Solid Carbide Jobbers Drill Number 32 Uncoated Garr Tool (Solid Carbide Jobbers Drill)

Diameter = #32

Decimal = .116"

Flute Length = 1-1/4"

Overall Length = 2-1/4"

Point geometry = 118 Degree Campoint

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 56295

Original Manufacturers Packaging
Uses - Aluminum, Cast Iron, Non-ferrous, Abrasive Materials
$3.25
Solid Carbide Jobbers Drill {.1181"} 3MM Tin Coated Kennametal (Solid Carbide Jobbers Drill)

Diameter = 3MM

Decimal = .1181"

Flute Length = 13/16"

Overall Length = 2-3/4"

Point geometry = 140 Degree Split

Right hand cut

Shank Diameter = 6MM {.2362"}

Coating = Tin

Solid Carbide premium sub-micron grain

Manufacturers P/N B221A0300

Tolerance = +0.0000/-0.0005

Original Manufacturers Packaging

Uses - Stainless Steels, Titanium, Mild Steels
$14.00
Solid Carbide Jobbers Drill {.120"} #31 Uncoated Straight Flute Atrax USA (Solid Carbide Jobbers Drill)

Diameter = #31

Decimal = .120"

Flute Length = 7/8"

Overall Length = 1-7/8"

Point geometry = 140 Degree Notched

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Manufacturers P/N 85260313

Tolerance = +0.0000/-0.0005

Original Manufacturers Packaging
Uses - Capable of producing reamer type finishes in work hardened and abrasive materials, Hard Materials, Chrome Alloys, Titanium Alloys, Heat Treated Alloys, Nickel Alloys, Steel and Stainless Weldments
$3.50
Solid Carbide Jobbers Drill Number 31 {.120"} Uncoated Straight Flute Monster USA (Solid Carbide Jobbers Drill)

Diameter = #31

Decimal = .120"

Flute Length = 7/8"

Overall Length = 1-7/8"

Point geometry = 140 Degree Notched

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Manufacturers P/N 470-301200

Tolerance = +0.0000/-0.0005

Original Manufacturers Packaging
Uses - Capable of producing reamer type finishes in work hardened and abrasive materials, Hard Materials, Chrome Alloys, Titanium Alloys, Heat Treated Alloys, Nickel Alloys, Steel and Stainless Weldments
$3.50
Solid Carbide Jobbers Drills {.1285"} #30 Uncoated Dagger Style for Composites/Aluminum (Solid Carbide Jobbers Drill Dagger Style)

Diameter = #30

Decimal = .1285"

Flute Length = 1"

Overall Length = 3"

Point geometry = Dagger

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 3000-1285-300

Original Manufacturers Packaging
Uses = Aluminum,Composites,Graphite, Abrasive Non-Ferrous Materials
$6.00
Solid Carbide Jobbers Drill 3.2mm {.126"} Diameter Uncoated USA (Solid Carbide Jobbers Drill)

Diameter = 3.2MM

Decimal = .126" You could Sub this as {.125" = 1/8"}

Flute Length = 1-5/16"

Overall Length = 2-9/16"

Point geometry = 118 Degree Split

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Manufacturers P/N 9328-2098

Tolerance = +0.0000/-0.0005

Original Manufacturers Packaging

Bought these deal out of a major U.S. Gun Manufacturer

Uses - Non-Ferrous alloys, Cast Iron, Plastics, Aluminum, Highly abrasive materials
$1.75
Solid Carbide Jobbers Drill Number 30 {.1285"} Uncoated Monster Tool (Solid Carbide Jobbers Drill)

Diameter = #30

Decimal = .1285"

Flute Length = 1-1/4"

Overall Length = 2-1/4"

Right hand cut

Point geometry = 118 Degree Split

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Manufacturers P/N 450-301285

Tolerance = +0.0000/-0.0005

Original Manufacturers Packaging

Tap/Drill for M4x0.7 Tap

Uses - Non-Ferrous alloys, Cast Iron, Plastics, Aluminum, Highly abrasive materials
$3.25
Solid Carbide Jobbers Drill {.1285"} #30 Uncoated Titan USA (Solid Carbide Jobbers Drill)

Diameter = #30

Decimal = .1285"

Flute Length = 1-1/4"

Overall Length = 2-1/4"

Point geometry = 118 Degree Split

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Manufacturers P/N TC19230

Tolerance = +0.0000/-0.0005

Original Manufacturers Packaging

Tap/Drill for M4x0.7 Tap

Uses - Non-Ferrous alloys, Cast Iron, Plastics, Aluminum, Highly abrasive materials
$3.25
Solid Carbide Jobbers Drill {.136"} #29 Hardlube Coated Garr Tool Series 1280H (Solid Carbide Jobbers Drill)

Diameter = #29

Decimal = .136"

Flute Length = 7/8"

Overall Length = 2-1/4"

Right hand cut

Point geometry = 140 Degree Split

Coating = Hardlube

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 21321

Original Manufacturers Packaging

Tap/Drill 8-32

Uses - High Temp Alloys, Nickel, Stainless Steels, Cobalt Based Alloys, Tool Steels- High Performance-High Penetration
$14.00
Solid Carbide Jobbers Drill Number 29 {.136"} Uncoated OSG Tap drill 8-32 Cut tap (Solid Carbide Jobbers Drill)

Diameter = #29 Tap Drill 8-32 Cut tap

Decimal = .136"

Flute Length = 1-3/8"

Overall Length = 2-1/2"

Point geometry = 118 Degree 4 Facet

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 220-1360

Original Manufacturers Packaging
Uses - Steels, Stainless Steels, Abrasive Materials
$4.50
Solid Carbide Jobbers Drill {.136"} #29 Uncoated Monster (Solid Carbide Jobbers Drill)

Diameter = #29

Decimal = .136"

Flute Length = 1-3/8"

Overall Length = 2-1/2"

Point geometry = 118 Degree Split

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 450-301360

Original Manufacturers Packaging Tap/Drill 8-32
Uses - Steels, Stainless Steels, Abrasive Materials
$3.50
Solid Carbide Jobbers Drill {.136"} #29 Uncoated Hi Tuff Design MA Ford (Solid Carbide Jobbers Drill Hi Tuff)

Diameter = #29

Decimal = .136"

Flute Length = 15/16"

Overall Length = 1-15/16"

Point geometry = 135 Degree Split

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 25310

Original Manufacturers Packaging

Tap/Drill 8-32
Uses - Stainless Steels, Nickel, Titanium
$7.00
Solid Carbide Jobbers Drill {.136"} #29 Uncoated Ostrem Tool USA (Solid Carbide Jobbers Drill)

Diameter = #29

Decimal = .136"

Flute Length = 1-1/4"

Overall Length = 3"

Point geometry = 118 Degree Split

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 136-WA110

Original Manufacturers Packaging

Tap/Drill 8-32

Uses - Steels, Stainless Steels, Abrasive Materials
$6.00
Solid Carbide Jobbers Drill {.1406"} 9/64 Uncoated OSG Tool (Solid Carbide Jobbers Drill)

Diameter = 9/64"

Decimal = .1406"

Flute Length = 1-3/8"

Overall Length = 2-1/2"

Point geometry = 118 Degree 4 Facet

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 220-1406

Original Manufacturers Packaging
Uses - Steels, Stainless Steels, Abrasive Materials
$4.50
Solid Carbide Jobbers Drill {.1495"} #25 Hardlube Coated Garr Tool Series 1280H (Solid Carbide Jobbers Drill)

Diameter = #25

Decimal = .1495"

Flute Length = 15/16"

Overall Length = 2-1/4"

Point geometry = 140 Degree Split

Right hand cut

Coating = Hardlube

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 21351

Original Manufacturers Packaging

Tap/Drill 10-24

Uses - High Temp Alloys, Nickel, Stainless Steels, Cobalt Based Alloys, Tool Steels- High Performance-High Penetration
$14.80
Solid Carbide Drill {.0781"} 5/64" Diam Uncoated Long Parabolic Flute Guhring (Long parabolic carbide drill)

Diameter = 5/64"

Decimal = .0781"

Flute Length = 2-1/2"

Overall Length = 6"

Flute geometry = Parabolic - Right Hand

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 46942 C18001-0781-C

Original Manufacturers Packaging

Note: This item bulk packed 10 per unit will re-pack {and protect well} if less than 10 requested
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$12.50
Solid Carbide Jobbers Drill {.152"} #24 Straight Flute Uncoated OSG (Solid Carbide Jobbers Drill)

Diameter = #24

Decimal = .152"

Flute Length = 5/8"

Overall Length = 2"

Point geometry = 140 Notched

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 300-1520

Original Manufacturers Packaging
Uses - Capable of producing reamer type finishes in work hardened and abrasive materials such as Chrome alloys, heat treated alloys, nickel alloys, titanium alloys, steel and steel weldments This type drill is designed specifically for these materials - Increased edge strength & precision tolerance holes
$8.00
Solid Carbide Jobbers Drill {.154"} #23 Uncoated Monster Tool Made in USA (Solid Carbide Jobbers Drill)

Diameter = #23

Decimal = .154"

Flute Length = 1-3/8""

Overall Length = 2-1/2"

Point geometry = 118 Deg Split

Coating = Uncoated/Bright

25 Degree Right hand helix/cut

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 450-301540

Original Manufacturers Packaging

Uses - Non-Ferrous Alloys, cast iron, plastics, aluminum and highly abrasive materials
$4.00
Solid Carbide Jobbers Drill {.157"} #22 Tialn 3 Flute Composites++ California Tool (Solid Carbide Jobbers Drill)

Diameter = #22

Decimal = .1570"

Flute Length = 13/16"

Overall Length = 3"

Shank Diameter = .180"

Right hand cut

Point geometry = 140 Degree

Coating = Tialn

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N CHD157-0900-3-FNT

Original Manufacturers Packaging

Uses - Composites, Fiber Glass, Non-ferrous, Non-metallics
$6.50
Solid Carbide Jobbers Drill {.159"} #21 Hardlube Coated Garr Tool Series 1280H (Solid Carbide Jobbers Drill)

Diameter = #21

Decimal = .159"

Flute Length = 15/16"

Overall Length = 2-1/2"

Point geometry = 140 Degree Split 4 Facet

Right hand cut

Coating = Hardlube

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 21381

Original Manufacturers Packaging

Tap/Drill 10-32

Uses - High Temp Alloys, Nickel, Stainless Steels, Cobalt Based Alloys, Tool Steels- High Performance-High Penetration
$14.75
Solid Carbide Jobbers Drill {.1654"} 4.2MM Tialn 3 Flute Aluminum/Stainless USA (Solid Carbide Jobbers Drill)

Diameter = 4.2MM Can be used as Tap/Drill for M5x0.8

Decimal = .1654"

Flute Length = 1-1/8"

Overall Length = 3"

3 Flutes Right hand cut

Point geometry = 140 Degree Split

Coating = Tialn

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 204B02507

Original Manufacturers Packaging
Uses - Aluminum, Stainless
$9.75
Solid Carbide Drill {.1719"} 11/64" Diam Uncoated Parabolic Flute 4" OAL Guhring (Long parabolic carbide drill)

Diameter = 11/64"

Decimal = .1719"

Flute Length = 2-1/4"

Overall Length = 4"

Flute geometry = Parabolic

Point geometry = 118 Degree

Coating = uncoated

Right hand helix

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 46928 C18001-1719-C

Original Manufacturers Packaging

Note: This item bulk packed 10 per unit will re-pack {and protect well} if less than 10 requested

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$12.50
Solid Carbide Drill {.1719"} 11/64" Diam Uncoated Parabolic Flute 5" OAL Guhring (Long parabolic carbide drill)

Diameter = 11/64"

Decimal = .1719"

Flute Length = 2-1/4"

Overall Length = 5"

Flute geometry = Parabolic Right hand helix

Point geometry = 118 Degree

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 46929 C18001-1719-C

Original Manufacturers Packaging

Note: This item bulk packed 10 per unit will re-pack {and protect well} if less than 10 requested
Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$14.00
Solid Carbide Drill {.1719"} 11/64" Diam Uncoated Parabolic Flute 6" OAL Guhring (Long parabolic carbide drill)

Diameter = 11/64"

Decimal = .1719"

Flute Length = 2-1/4"

Overall Length = 6"

Flute geometry = Parabolic

Point geometry = 118 Degree

Coating = uncoated

Right hand helix

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 46930 C18001-1719-C

Original Manufacturers Packaging

Note: This item bulk packed 10 per unit will re-pack {and protect well} if less than 10 requested

Uses = Parabolic flute geometry aids in chip evacuation in soft, gummy materials, metallic and non-metallic alike
$16.00
Solid Carbide Jobbers Drill {.177"} #16 Uncoated Hi-Roc Hard Material 42-65rc RTW (Solid Carbide Jobbers Drill)

Diameter = #16

Decimal = .177"

Flute Length = 5/8"

Overall Length = 2"

Point geometry = 140 Degree Notched

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 11645

Original Manufacturers Packaging
Uses - Hard Materials 42-65rc
$14.50
Solid Carbide Jobbers Drills {.1772"} 4.5MM Uncoated Dagger Style for Composites/Aluminum (Solid Carbide Jobbers Drill Dagger Style)

Diameter = 4.5MM

Decimal = .1772"

Flute Length = 1"

Overall Length = 4"

Point geometry = Dagger

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 1772

Original Manufacturers Packaging
Uses = Aluminum,Composites,Graphite, Abrasive Non-Ferrous Materials
$10.00
Solid Carbide Jobbers Drills {.180"} #15 Tin Coated 3 Flute Titanium/Aluminum Fullerton (Solid Carbide Jobbers Drill)

Diameter = #15

Decimal = .180"

Flute Length = 1"

Overall Length = 2-5/16

Number of Flutes = 3

Point geometry = 140 Degree

Right hand cut

Coating = Tin

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 893427

Original Manufacturers Packaging

Uses = Aluminum,Titanium
$15.00
Solid Carbide Drill {.2055"} #5 Hi Roc Hard Materials 42-65RC MA FORD (Solid Carbide Jobbers Drill)

Diameter = #5

Decimal = .2055"

Flute Length = 1"

Overall Length = 2"

Point geometry = 135 Deg

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 20385

Original Manufacturers Packaging
Uses - Capable of producing reamer type finishes in materials 42-65rc. Produces chips without generating excessive heat. Accurate hole size without annealing or softening your workpiece.
$12.00
Solid Carbide Jobbers Drill {.2165"} 5.5MM Uncoated Hi Tuff Design RTW (Solid Carbide Jobbers Drill Hi Tuff)

Diameter = 5.5MM

Decimal = .2165"

Flute Length = 1-1/8"

Overall Length = 2.590"

Point geometry = 135 Degree

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 465738

Original Manufacturers Packaging
Uses - Stainless Steels, Nickel, Titanium, Tool Steels and high strength ferrous metals
$14.00
Solid Carbide Jobbers Drill {.2188"} 7/32" Straight Flute Uncoated OSG (Solid Carbide Jobbers Drill)

Diameter = 7/32

Decimal = .2188"

Flute Length = 1-1/4"

Overall Length = 2-3/8"

Point geometry = 140 Notched

Right hand cut

Coating = Uncoated/Bright

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 200-2188

Original Manufacturers Packaging
Uses - Capable of producing reamer type finishes in work hardened and abrasive materials such as Chrome alloys, heat treated alloys, nickel alloys, titanium alloys, steel and steel weldments This type drill is designed specifically for these materials - Increased edge strength & precision tolerance holes
$8.00
Solid Carbide Jobbers Drills {.2165"} 5.5MM Uncoated 3 Flute Titanium/Aluminum Ostrem USA (Solid Carbide Jobbers Drill)

Diameter = 5.5MM

Decimal = .2165"

Flute Length = 1-3/4"

Overall Length = 3"

Number of Flutes = 3

Point geometry = 140 Degree Split

Right hand cut

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 5.5MM DTT

Original Manufacturers Packaging

Uses = Aluminum,Titanium
$12.50
Solid Carbide Jobbers Drill {.2344"} 15/64" Hardlube Coated Garr Tool Series 1280H (Solid Carbide Jobbers Drill)

Diameter = 15/64"

Decimal = .2344"

Flute Length = 1-1/2"

Overall Length = 3-1/4"

Point geometry = 140 Degree 4 Facet

Right hand cut

Coating = Hardlube

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 21526

Original Manufacturers Packaging
Uses - High Temp Alloys, Nickel, Stainless Steels, Cobalt Based Alloys, Tool Steels- High Performance-High Penetration
$15.00
Solid Carbide Drill {.2344"} 15/64" Uncoated 3 Flute Titanium/Aluminum Fullerton (Solid Carbide Jobbers Drill)

Diameter = 15/64"

Decimal = .2344"

Flute Length = 2"

Overall Length = 4-1/2"

Number of Flutes = 3

Point geometry = 140 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N Z597561

Original Manufacturers Packaging

Uses = Aluminum,Titanium
$18.00
Solid Carbide Long Drill {.242"} Ltr "C" Long Uncoated Parabolic Flute 3 Flats on Shank Guhring (Solid Carbide Long Parabolic Drill)

Diameter = Ltr "C"

Decimal = .242"

Flute Length = 3-3/4"

Overall Length = 6"

{3 Flats on Shank}

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 47572 Original Manufacturers Packaging
Uses = Aluminum,Titanium
$28.00
Solid Carbide Long Drill {.250"} 1/4" Dia x 4" Long Uncoated Parabolic Flute 3 Flats on Shank Guhring (Solid Carbide Long Parabolic Drill)

Diameter = 1/4"

Decimal = .250"

Flute Length = 2"

Overall Length = 4"

{3 Flats on Shank}

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 47576

Original Manufacturers Packaging

Note: Item came bulked pack 10 per unit will securely re-pack
Uses = Aluminum,Titanium
$16.00
Solid Carbide Drill {.250"} 1/4" Dia x 5" OAL Uncoated Parabolic Flute 3 Flats on Shank Guhring (Solid Carbide Long Parabolic Drill)

Diameter = 1/4"

Decimal = .250"

Flute Length = 2-1/4"

Overall Length = 5"

{3 Flats on Shank}

Point geometry = 118 Degree

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 47577

Original Manufacturers Packaging

Note: Item came bulk packed 10 per unit will securely re-pack if less than unit requested
Uses = Aluminum,Titanium
$22.00
Solid Carbide Long Drill .2502"x6" OAL Uncoated Parabolic Flute Design U.S.A. (Long Solid Carbide Drill)

Diameter = .2502"

Decimal = .2502"

Flute Length = 2"

Overall Length = 6"

Point geometry = 118 Degree Split

Right hand cut

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 03-29236

Original Manufacturers Packaging

Note: This drill has a pilot diameter of 15/64" {.2344"} for a length of 3/16"

Uses = Aluminum,Titanium
$28.00
Solid Carbide Jobbers Drills {.2559"} 6.5MM Tin Coated Steels & Stainless Sandvik (Solid Carbide Jobbers Drill )

Diameter = 6.5MM

Decimal = .2559"

Flute Length = 1.200"

Overall Length = 3.110"

Point geometry = 140 Deg Split

Right hand cut

Coating = Tin

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N R415.5-0650

Original Manufacturers Packaging

Uses = Steels/Stainless
$38.00
Per Page      1 - 50 of 141