Solid Carbide Coolant Thru

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}
Sort By:  
Uses- Flood coolant thru enhances chip evacuation - High penetration drill provides accurate hole sizing = Used in a wide variety of materials - steels - stainless steels - hardened steels - cast iron - aluminum alloys -and titaniums
$16.00
Uses- Flood coolant thru enhances chip evacuation - High penetration drill provides accurate hole sizing = Used in a wide variety of materials - steels - stainless steels - hardened steels - cast iron - aluminum alloys -and titaniums
$22.00
Uses = Thru the spindle coolant accepted Note: There is a whistle notch ground on shank Aircraft Industry this is standard, it is a flat tapered {15 degree} to draw tool into holder
$18.00
Coolant thru Solid carbide Drill {.0591"} 1.5MM Tialn Mitsubishi (Coolant thru solid carbide drill)

Diameter = 1.5MM

Decimal = .0591"

Flute Length = 11/16"

Overall Length = 2-3/16"

Shank Dia = 1/8"

Point geometry = 140 Deg Split

Coating = Tialn

Right hand helix - Coolant thru

premium sub-micron grain carbide Mitsubishi Grade VP15TF

Tolerance = +0.0000/-0.0002"

Manufacturer P/N MZS-00591LB

Original Manufacturers Packaging

Uses- Flood coolant thru enhances chip evacuation - High penetration drill provides accurate hole sizing = Used in a wide variety of materials - steels - stainless steels - hardened steels - cast iron - aluminum alloys -and titaniums
$16.00
Solid carbide Drill {.1496"} 3.8MM Coolant thru Tialn Mitsubishi (Coolant thru solid carbide drill)

Diameter = 3.8MM

Decimal = .1496"

Flute Length = 1-1/4"

Overall Length = 3-1/4"

Shank Dia = 5/32"

Point geometry = 140 Deg Split

Coating = Tialn

Right hand helix

premium sub-micron grain carbide Mitsubishi Grade VP15TF

Tolerance = +0.0000/-0.0002"

Manufacturer P/N MZS-0380MB

Original Manufacturers Packaging

Tap/Drill 10-24

Uses- Flood coolant thru enhances chip evacuation - High penetration drill provides accurate hole sizing = Used in a wide variety of materials - steels - stainless steels - hardened steels - cast iron - aluminum alloys -and titaniums
$22.00
Solid Carbide Drill {.1969"} 5MM Dia x 5.960" Fl Lgth x 7-11/16" Oal Unctd Straight Flute Coolant Thru USA (Long carbide drill coolant thru)

Diameter = 5MM

Decimal = .1969"

Flute Length = 5.960"

Overall Length = 7-11/16"

Shank Dia = 6MM {.2362"}

Flute geometry = Straight Flute Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N JK01150401

Original Manufacturers Packaging

Note: Manufacturer has mislabeled and marked as carbide tipped - This item is solid carbide
Uses = General purpose deep hole drilling
$38.00
Solid Carbide Drill {.2244"} 5.7MM Dia Tin Coated Coolant Thru Unknown Manufacturer (Coolant thru solid carbide drill)

Diameter = 5.7MM

Decimal = .2244"

Flute Length = 1-5/8"

Overall Length = 3-1/4"

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Tin

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

P/N 414HP-2244T

Original Manufacturers Packaging

Note: There is a whistle notch ground on shank Aircraft Industry this is standard it is a 15 degree flat tapered to draw tool into holder

Uses = Thru the spindle coolant accepted Note: There is a whistle notch ground on shank Aircraft Industry this is standard, it is a flat tapered {15 degree} to draw tool into holder
$18.00
Solid Carbide Drill {.2441"} 6.2MM Dia Tialn Coated Coolant Thru Kennametal (Coolant thru solid carbide drill)

Diameter = 6.2MM

Decimal = .2441"

Flute Length = 2"

Overall Length = 3.600"

Shank Diameter = 8MM {.315"}

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Tialn

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 2264197 B255A06200HPC KC7315

Original Manufacturers Packaging
Uses = Steels, Stainless Steels
$32.00
Solid Carbide Drill {.2969"} 19/64" Dia Tialn Coated Coolant Thru Kennametal (Coolant thru solid carbide drill)

Diameter = 19/64"

Decimal = .2969"

Flute Length = 1-3/4"

Overall Length = 3.600"

Shank Diameter = 8MM {.315"}

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Tialn

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 3560428 B255A07541HPC KC7315

Original Manufacturers Packaging
Uses = Steels, Stainless Steels
$36.00
Solid Carbide Drill {.2344"} 15/64" Dia Tialn Coated Coolant Thru Spie Tool USA (Coolant thru solid carbide drill)

Diameter = 15/64"

Decimal = .2344"

Flute Length = 2-1/4"

Overall Length = 4-1/2"

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Tialn

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N HPD-015A

Original Manufacturers Packaging

Uses = Steels, Stainless Steels
$34.00
Solid Carbide Drill {.2362"} 6MM Dia x .5-1/2" Fl Lgth x 7-3/16" Oal Unctd Straight Flute Coolant Thru USA (Long carbide drill coolant thru)

Diameter = 6MM

Decimal = .2362"

Flute Length = 5-1/2"

Overall Length = 7-13/16"

Shank Dia = 6MM {.2362"}

Flute geometry = Straight Flute Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N JK01150402

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$44.00
Solid Carbide Drill {.2362"} 6MM Dia Uncoated Coolant Thru USA (Coolant thru solid carbide drill)

Diameter = 6MM

Decimal = .2362"

Flute Length = 2"

Overall Length = 4-1/2"

Shank Diameter = 6MM {.2362"}

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N W03556 TSM30

Original Manufacturers Packaging
Uses = Steels, Stainless Steels
$18.00
Solid Carbide Drill {.2756"} 7MM Dia x 4-7/8" Fl Lgth x 6-7/8" Oal Unctd Straight Flute Coolant Thru USA (Long carbide drill coolant thru)

Diameter = 7MM

Decimal = .2756"

Flute Length = 4-7/8"

Overall Length = 6-7/8"

Shank Dia = 8MM {.315"}

Flute geometry = Straight Flute Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N EMP90KS107MM

Original Manufacturers Packaging

Note: Manufacturer has mislabeled and marked as carbide tipped - This item is solid carbide

Uses = General purpose deep hole drilling
$44.00
Solid Carbide Drill Long {.3906"} 25/64" Dia x 2-3/16" Fl Lgth x 9-1/12" Oal Tin Ctd Straight Flute Coolant Thru USA (Long carbide drill coolant thru)

Diameter = 25/64"

Decimal = .3906"

Flute Length = 2-3/16"

Overall Length = 9-1/2"

Flute geometry = Straight Flute Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 910-410C

Original Manufacturers Packaging

Uses = General purpose deep hole drilling
$38.00
Solid Carbide Drill {.4375"} 7/16" Dia Straight Flute Uncoated Coolant Thru Kennametal (Coolant thru solid carbide drill)

Diameter = 7/16

Decimal = .4375"

Flute Length = 2"

Overall Length = 3-3/4"

Shank Diameter = 6MM {.2362"}

Flute geometry = Straight Flute/Coolant thru the flutes

Point geometry = 135 Degree Split

Coating = Uncoated/Bright

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 2870627

Original Manufacturers Packaging
Uses = Cast Irons
$18.00
Solid Carbide Drill {.4585"} .4585" Dia x 3" Fl Lgth x 9-1/2" Oal Tin Coated Straight Flute Coolant Thru USA (Long carbide drill coolant thru)

Diameter = .4585"

Flute Length = 3"

Overall Length = 9-1/2"

Flute geometry = Straight Flute Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Tin Coated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 910-410D

Original Manufacturers Packaging
Uses = General purpose deep hole drilling
$78.00
Solid Carbide Coolant thru Drill .4612" Dia x 2-1/2"Fl Lgth x 4-5/8" Oal Tialn USA (carbide drill coolant thru)

Diameter = .4612"

Flute Length = 2-1/2"

Overall Length = 4-5/8"

Flute geometry = Standard Right Hand Spiral Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Tialn Coated

Shank Diameter 14MM {.5512"}

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 9712032

Original Manufacturers Packaging

Uses = Steels and Stainless
$55.00
Solid Carbide Drill {.4646"} 11.8MM Dia Tin Coolant Thru Seco Sweden (Coolant thru solid carbide drill)

Diameter = 11.8MM

Decimal = .4646"

Flute Length = 2"

Overall Length = 4"

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Tin

Shank Diameter = 12MM {.4724"}

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 59472 Seco SD Series

Original Manufacturers Packaging
Uses = Steels, Stainless Steels
$55.00
Solid Carbide Drill {.4646"} 11.8MM Dia Uncoated Long Coolant Thru USA (Coolant thru solid carbide drill)

Diameter = 11,8MM

Decimal = .4646"

Flute Length = 3-1/8"

Overall Length = 6-1/2"

Tang On Shank

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 461697752

Original Manufacturers Packaging
Uses = Steels, Stainless Steels
$58.00
Solid Carbide Drill {.4921"} 12.5MM Dia Tin Coolant Thru Sandvik (Coolant thru solid carbide drill)

Diameter = 12.5MM

Decimal = .4921"

Flute Length = 2-7/8"

Overall Length = 5"

Shank Diameter = .551" {15MM}

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Tin

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N R415.5-1250

Original Manufacturers Packaging
Uses = Steels, Stainless Steels
$68.00
Solid Carbide Drill {.5025"} .5025 Dia Tin Coolant Thru Sumitomo (Coolant thru solid carbide drill)

Diameter = .5025"

Decimal = .5025"

Flute Length = 2-1/2"

Overall Length = 5-1/4"

Shank Diameter= 33/64" .5156"

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Tin

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N NB-75

Out of original Manufacturers packaging Marked on Shank
Uses = Steels, Stainless Steels
$62.00
Solid Carbide Drill {.6062"} 15.4MM Dia Tin Coated Hi Tuff Design Coolant thru RTW USA (Solid Carbide Jobbers Drill Hi Tuff)

Diameter = 15.4MM

Decimal = .6062"

Flute Length = 3-1/2"

Overall Length = 5-1/2"

Point geometry = 140 Degree Notched

Right hand cut

Coating = Tin

Solid Carbide premium sub-micron grain

Tolerance = +0.0000/-0.0005"

Manufacturer P/N 400-06440 / 414HT-0606T

These are out of Original Manufacturers Packaging {Marked on Shank with Manufacturer and part#}
Uses - Stainless Steels, Nickel, Titanium
$88.00
Solid Carbide Drill {.6254"} .6254 Uncoated Diam Stub Lgth Coolant Thru Mistubishi (Coolant thru solid carbide drill)

Diameter = .6254"

Flute Length = 1-1/4"

Overall Length = 3-1/4"

Flute geometry = Right hand spiral/Cut - Coolant thru the flutes

Point geometry = 140 Degree Split

Coating = Uncoated

Solid C-2 grade premium sub-micron grain carbide

Tolerance = +0.0000/-0.0005"

Manufacturer P/N NB-Mitsu

Out of Original Manufacturers Packaging {markings On shank}
Uses = Steels, Stainless Steels
$38.00
Per Page      1 - 20 of 20
  • 1