Extension/Long/Pulley Style Machine Screw and Inch

Applications = For deeper threading and long reach applications.

All items are new in original manufacturer's packaging {unless otherwise noted}.

They are limited to quantities available.

These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.

Visuals are actual item{s}
Sort By:  
tap 2-56x6 sp pt vega
Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$24.00
tap 6-32x6 sp pt vega
Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$14.00
tap 8-32x6 sp pt vega
Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$14.00
tap 10-24x6 sp pt vega
Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$14.00
tap 10-32x6 sp pt vega
Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$14.00
tap 1/4-20x6 sp pt vega
Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$14.00
TAP 10-24X6 SOWA
Applications = Yellow Ring Superior performance in hardened tool steels such as 4140, 4340, H13, D2. Up to 35 HRC Designed for high-speed tapping applications.
$12.50
TAP 10-32X6 SOWA
Applications = Yellow Ring Superior performance in hardened tool steels such as 4140, 4340, H13, D2. Up to 35 HRC Designed for high-speed tapping applications.
$12.50
tap 5/16-18x6 sp pt vega
Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$18.00
tap 10-32x6 plly hy pro
Applications = General Purpose Steels. This version is commonly referred to as a Pulley Tap
$6.00
tap 1/4-20x5 plly bath
Applications = General Purpose Steels. This version is commonly referred to as a Pulley Tap
$6.00
tap 1/4-20x8 plly  usa
Applications = General Purpose Steels. This version is commonly referred to as a Pulley Tap
$8.00
tap 5/16-18x4 plly netco
Applications = General Purpose Steels. This version is commonly referred to as a Pulley Tap
$8.00
tap 3/8-16x5 plly bath
Applications = General Purpose Steels. This version is commonly referred to as a Pulley Tap
$10.00
tap 3/8-16x6 sml shnk r&n
Applications = General Purpose Steels. This version is commonly referred to as a Small Shank Tap
$17.75
tap 7/16-20x6  Brbkr
Applications = General Purpose Steels. This item Commonly referred to as a Pulley Tap
$12.00
tap 1/2-13x8  Sml shnk r&n
Applications = General Purpose Steels. This item Commonly referred to as a Small Shank Extension Tap
$27.00
tap sp pt 1-14 brt rbc
Applications = Used for hand and machine tapping in both thru or blind holes in a variety of materials. This style tap generally used in thru holes, or holes that have enough clearance at bottom to accommodate the chip. Spiral point Taps are free cutting reducing torque required.
$58.00
tap 2-56x6 sp pt vega
Extension Tap 2-56 x 6" Overall Length Spiral Point Plug H2 2 Flute Uncoated Vega (Extension Tap)

Diameter and Pitch = 2-56

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H2

Number of Flutes = 2 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Undercut {relief} after threads on neck diameter for approx 1/2"

P/N = 82800

Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$24.00
tap 6-32x6 sp pt vega
Extension Tap 6-32 x 6" Overall Length Spiral Point Plug H3 3 Flute Uncoated Vega (Extension Tap)

Diameter and Pitch = 6-32

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Undercut {relief} after threads on neck diameter for approx 5/8"

P/N =82803

Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$14.00
tap 8-32x6 sp pt vega
Extension Tap 8-32 x 6" Overall Length Spiral Point Plug H3 3 Flute Uncoated Vega (Extension Tap)

Diameter and Pitch = 8-32

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Undercut {relief} after threads on neck diameter for approx 3/4"

P/N = 82804

Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$14.00
tap 10-24x6 sp pt vega
Extension Tap 10-24 x 6" Overall Length Spiral Point Plug H3 3 Flute Uncoated Vega (Extension Tap)

Diameter and Pitch = 10-24

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Undercut {relief} after threads on neck diameter for approx 3/4"

P/N = 82805

Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$14.00
tap 10-32x6 sp pt vega
Extension Tap 10-32 x 6" Overall Length Spiral Point Plug H3 3 Flute Uncoated Vega (Extension Tap)

Diameter and Pitch = 10-32

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Undercut {relief} after threads on neck diameter for approx 3/4"

P/N = 82806

Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$14.00
tap 1/4-20x6 sp pt vega
Extension Tap 1/4-20 x 6" Overall Length Spiral Point Plug H3 3 Flute Uncoated Vega (Extension Tap)

Diameter and Pitch = 1/4-20

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Undercut {relief} after threads on neck diameter for approx 1"

P/N = 82807

Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$14.00
TAP 10-24X6 SOWA
Extension Tap 10-24 x 6" Overall Length Spiral Point Plug H3 3 Flute Black Oxide Sowa (Extension Tap)

Diameter and Pitch = 10-24

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Undercut {relief} after threads on neck diameter for approx .800"

P/N = 122706

Applications = Yellow Ring Superior performance in hardened tool steels such as 4140, 4340, H13, D2. Up to 35 HRC Designed for high-speed tapping applications.
$12.50
TAP 10-32X6 SOWA
Extension Tap 10-32 x 6" Overall Length Spiral Point Plug H3 3 Flute Black Oxide Sowa (Extension Tap)

Diameter and Pitch = 10-32

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Undercut {relief} after threads on neck diameter for approx 3/8"

P/N = 122708

Out of Original manufacturer's packaging
Applications = Yellow Ring Superior performance in hardened tool steels such as 4140, 4340, H13, D2. Up to 35 HRC Designed for high-speed tapping applications.
$12.50
TAP 1/4-20X6 india
Extension Tap 1/4-20 x 6" Overall Length Spiral Point Plug H3 2 Flute Uncoated Import (Extension Tap)

Diameter and Pitch = 1/4-20

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 2 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Undercut full length of shank after threads

P/N = NB-75 040x6 {India}

Applications = General purpose steels.
$5.00
tap 1/4-28x4 sp pt bath
Extension Tap 1/4-28 x 4" Overall Length Spiral Point Plug H1 2 Flute Black Oxide U.S.A. (Extension Tap)

Diameter and Pitch = 1/4-28

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 4"

H Limit = H1

Number of Flutes = 2 Which are Straight

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Full Size Shank

P/N = Bath 6523-2273

Applications = General purpose steels.
$8.00
tap 5/16-18x5 sp pt bath
Extension Tap 5/16-18 x 5" Overall Length Spiral Point Plug H3 2 Flute Black Oxide U.S.A. (Extension Tap)

Diameter and Pitch = 5/16-18

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 5"

H Limit = H3

Number of Flutes = 2 Which are Straight

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Full Size Shank

P/N = Bath 275H410PT3

Applications = General purpose steels.
$10.00
tap 5/16-18x6 sp pt osg
Extension Tap 5/16-18 x 6" Overall Length Spiral Point Plug H3 3 Flute Black Oxide OSG (Extension Tap)

Diameter and Pitch = 5/16-18

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Black Oxide

Ground Threads

Reduced Neck Diameter for 1" after threads

P/N = 1765201

Applications = Stainless and General purpose steels.
$18.00
tap 5/16-18x6 sp pt vega
Extension Tap 5/16-18 x 6" Overall Length Spiral Point Plug H3 3 Flute Uncoated Vega (Extension Tap)

Diameter and Pitch = 5/16-18

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Undercut {relief} after threads on neck diameter for approx 1"

P/N =82809

Applications = XHP Vega Tap. Use in Carbon, Alloy and Stainless Steel Materials. Can also be used in Cast Iron and non-Ferrous materials. Extended length will tap deeper. High Speed Vanadium.
$18.00
tap 3/8-16x4 nrth amrcn
Extension Tap 3/8-16 x 4" Overall Length Spiral Point Plug H3 3 Flute Uncoated U.S.A. (Extension Tap)

Diameter and Pitch = 3/8-16

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 4"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Full Size Shank

P/N = 12A

Out of original Manufacturer's packaging Marked on Tap Shank
Applications = General Purpose Steels
$14.00
tap 1/2-13x6 r&n
Extension Tap 1/2-13 x 6" Overall Length Spiral Point Plug H3 3 Flute Uncoated Reiff & Nestor (Extension Tap)

Diameter and Pitch = 1/2-13

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 6"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Full Undercut on Shank

P/N = 45747

Out of original Manufacturer's packaging Marked on Tap Shank
Applications = General Purpose Steels
$24.00
tap 3/8-16 x 8 rbc
Extension Tap 3/8-16 x 8" Overall Length Spiral Point Plug H5 3 Flute Uncoated Regal Beloit (Extension Tap)

Diameter and Pitch = 3/8-16

Lead = Plug {3-5 Thread Lead}

Spiral Point {Chip driver}

Overall Length = 8"

H Limit = H5

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

Undercut {relief} after threads on neck diameter for approx 3/8" Then Shank is Full Size

P/N = 697172B5428

Applications = General Purpose Steels
$14.00
tap 10-32x6 plly hy pro
Pulley Tap 10-32 x 6" Overall Length Hand Style Plug H3 2 Flute Uncoated Hy-Pro (Extension Tap)

Diameter and Pitch = 10-32

Lead = Plug {3-5 Thread Lead}

Overall length = 6"

H Limit = H3

Number of Flutes = 2 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

P/N = 4928-321

Out of Original Manufacturer's Packaging
Applications = General Purpose Steels. This version is commonly referred to as a Pulley Tap
$6.00
tap 1/4-20x5 plly bath
Pulley Tap 1/4-20 x 5" Overall Length Hand Style Bottom H3 3 Flute Black Oxide U.S.A. (Extension Tap)

Diameter and Pitch = 1/4-20

Lead = Bottom {1-2 Thread Lead}

Overall length = 5"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Black Oxide

Ground Threads

P/N = 6515-2190 {Bath}

Applications = General Purpose Steels. This version is commonly referred to as a Pulley Tap
$6.00
tap 1/4-20x8 plly  usa
Pulley Tap 1/4-20 x 8" Overall Length Hand Style Plug H3 4 Flute Chrome Coated U.S.A. (Extension Tap)

Diameter and Pitch = 1/4-20

Lead = Plug {3-5 Thread Lead}

Overall length = 8"

H Limit = H3

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Coating = Chrome

Ground Threads

P/N = NB-75 040x8 No Manufacturer / U.S.A. etched on Shank

Applications = General Purpose Steels. This version is commonly referred to as a Pulley Tap
$8.00
tap 5/16-18x4 plly netco
Pulley Tap 5/16-18 x 4" Overall Length Hand Style Plug H3 3 Flute Chrome Coated U.S.A. (Extension Tap)

Diameter and Pitch = 5/16-18

Lead = Plug {3-5 Thread Lead}

Overall length = 4"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Chrome

Ground Threads

P/N = 472 NETCO

Out of Original Manufacturer's Pack
Applications = General Purpose Steels. This version is commonly referred to as a Pulley Tap
$8.00
tap 3/8-16x5 plly bath
Pulley Tap 5/16-18 x 5" Overall Length Hand Style Bottom H3 3 Flute Black Oxide U.S.A. (Extension Tap)

Diameter and Pitch = 5/18-18

Lead = Bottom {1-2 Thread Lead}

Overall length = 5"

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Black Oxide

Ground Threads

P/N = 2-6515-2779 {bath}

Out of Original Manufacturer's Pack
Applications = General Purpose Steels. This version is commonly referred to as a Pulley Tap
$10.00
tap 3/8-16x6 sml shnk r&n
Small Shank Extension Tap 3/8-16 x 6" Overall Length Hand Style Plug H3 4 Flute Uncoated Reiff & Nestor (Extension Tap)

Diameter and Pitch = 3/8-16

Lead = Plug {3-5 Thread Lead}

Overall length = 6"

H Limit = H3

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

P/N = 45685

Applications = General Purpose Steels. This version is commonly referred to as a Small Shank Tap
$17.75
tap 3/8-24x6 plly besly tin
Pulley Tap 3/8-24 x 6" Overall Length Hand Style Bottom H3 4 Flute Tin Coated Besly (Extension Tap)

Diameter and Pitch = 3/8-24

Lead = Bottom {1-2 Thread Lead}

Overall length = 6"

H Limit = H3

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Coating = Tin coated

Ground Threads

P/N = T-221779-2E

Applications = General Purpose Steels.
$12.75
tap 3/8-24x4-1/2 std tol
Extension Tap 3/8-24 x 4-1/2" Overall Length Spiral Point Plug H1 3 Flute Uncoated U.S.A. (Extension Tap)

Diameter and Pitch = 3/8-24

Lead = Spiral Point {Chip driver} Plug {3-5 Thread Lead}

Overall length = 4-1/2"

H Limit = H1

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

This item has a reduced Neck for 1" Length After Threads

P/N = A-1A-19385 Standard Tool
Applications = General Purpose Steels.
$8.50
tap 7/16-20x6  Brbkr
Pulley Tap 7/16-20 x 6" Overall Length Hand Style Bottom H3 4 Flute Uncoated Brubaker (Extension Tap)

Diameter and Pitch = 7/16-20

Lead = Bottom {1-2 Thread Lead}

Overall length = 6"

H Limit = H3

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

P/N = 6K10

Applications = General Purpose Steels. This item Commonly referred to as a Pulley Tap
$12.00
tap 1/2-13x8  Sml shnk r&n
Small Shank Extension Tap 1/2-13 x 8" Overall Length Hand Style Plug H3 4 Flute Uncoated Reiff & Nestor (Extension Tap)

Diameter and Pitch = 1/2-13

Lead = Plug {3-5 Thread Lead}

Overall length = 8"

H Limit = H3

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

P/N = 45668

Out of Original Manufacturer's Packaging
Applications = General Purpose Steels. This item Commonly referred to as a Small Shank Extension Tap
$27.00
tap 11/16-16x8  ext wdll
Extension Tap 11/16-16 x 8" Overall Length Hand Style Plug H4 4 Flute Uncoated U.S.A. (Extension Tap)

Diameter and Pitch = 11/16-16

Lead = Plug {3-5 Thread Lead}

Overall length = 8"

H Limit = H4

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

P/N = 401162 Widell

Applications = General Purpose Steels.
$34.00
tap 3/4-16x6  ext besly
Extension Tap 3/4-16 x 6" Overall Length Hand Style Plug H3 4 Flute Black Oxide Besly (Extension Tap)

Diameter and Pitch = 3/4-16

Lead = Plug {3-5 Thread Lead}

Overall length = 6"

H Limit = H3

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Coating = Black Oxide

Ground Threads

P/N = L4164

Shank diameter goes from .610" at end of threads / to .590" Last 2.350" on Shank
Applications = General Purpose Steels.
$38.00
tap 7/8-9x10  ext nrth am
Extension Tap 7/8-9 x 10" Overall Length Hand Style Bottom H4 4 Flute Uncoated U.S.A. (Extension Tap)

Diameter and Pitch = 7/8-9

Lead = Bottom {1-2 Thread Lead}

Overall length = 10"

H Limit = H4

Number of Flutes = 4 Which are Straight

Right Hand Cutting

Coating = Uncoated

Ground Threads

P/N = 2Y24 North American

Shank diameter goes from .720" at end of threads / to .709" Last 3" on Shank

Out of Original Manufacturer's packaging

Applications = General Purpose Steels.
$44.00
tap 10-32 sp fl grnfld
Spiral Flute Extension Tap 10-32 x 4" Overall Length Bottom H3 3 Flute Uncoated Greenfield (Extension Tap)

Diameter and Pitch = 10-32

Lead = Bottom {1-2 Thread Lead}

Overall length = 4"

H Limit = H3

Number of Flutes = 3 with a 45 degree right hand helix

Right Hand Cutting

Coating = Uncoated

Ground Threads

P/N = GTD-U10208-1

No Undercut on Shank diameter
Applications = General Purpose Steels.
$22.00
tap 10-32x6 sp fl grnfld ems
Spiral Flute Extension Tap 10-32 x 6" Overall Length Bottom H3 3 Flute Black Oxide Greenfield EMS Version (Extension Tap)

Diameter and Pitch = 10-32

Lead = Bottom {1-2 Thread Lead}

Overall length = 6"

H Limit = H3

Number of Flutes = 3 with a 45 degree right hand helix

Right Hand Cutting

Coating = Black Oxide

Ground Threads

P/N = GTD-84510

Undercut on neck / of 1/2" after Threads
Applications = Stainless & General Purpose Steels.
$26.00
tap 1/4-20x6 sp fl grnfld
Spiral Flute Extension Tap 1/4-20 x 6" Overall Length Plug H5 3 Flute Black Oxide Greenfield (Extension Tap)

Diameter and Pitch = 1/4-20

Lead = Plug {3-5 Thread Lead}

Overall length = 6"

H Limit = H5

Number of Flutes = 3 with a 35 degree right hand helix

Right Hand Cutting

Coating = Black Oxide

Ground Threads

P/N = GTD-5344

No Undercut on Shank - You could say this is a spiral flute pulley type tap

Out of original Manufacturer's packaging Shank has all the markings

Applications = Stainless & General Purpose Steels.
$18.00
tap 1/4-20x6 sp fl vega
Spiral Flute Extension Tap 1/4-20 x 6" Overall Length Modified Bottom H3 3 Flute Black Oxide Vega (Extension Tap)

Diameter and Pitch = 1/4-20

Lead = Modified Bottom {1-1/2-2 Thread Lead}

Overall length = 6"

H Limit = H3

Number of Flutes = 3 with a 45 degree right hand helix

Right Hand Cutting

Coating = Black Oxide

Ground Threads

P/N = Vega-84807

Undercut on Shank after threads for approx 1.150"
Applications = Stainless & General Purpose Steels.
$26.00
tap 5/16-18x5 sp fl  bath
Spiral Flute Extension Tap 5/16-18 x 5" Overall Length Bottom H3 3 Flute Black Oxide U.S.A. (Extension Tap)

Diameter and Pitch = 5/16-18

Lead = Bottom {1-2 Thread Lead}

Overall length = 5"

H Limit = H3

Number of Flutes = 3 with a 35 degree right hand helix

Right Hand Cutting

Coating = Black Oxide

Ground Threads

P/N = Bath 1-6545-2779

No Undercut on Shank / You could call this one a spiral flute Pulley Style
Applications = General Purpose Steels.
$22.00
tap 5/16-18x6 sp fl  gtd
Spiral Flute Extension Tap 5/16-18 x 6" Overall Length 2-2-1/2 Thread lead H5 3 Flute Black Oxide Greenfield (Extension Tap)

Diameter and Pitch = 5/16-18

Lead = {2-2-1/2 Thread Lead}

Overall length = 6"

H Limit = H5

Number of Flutes = 3 with a 40 degree right hand helix

Right Hand Cutting

Coating = Black Oxide

Ground Threads

P/N = GTD-5344

No Undercut on Shank / You could call this one a spiral flute Pulley Style
Applications = General Purpose Steels.
$23.00
tap sp fl ext 1-8x8 ticn rbc
Spiral Flute Extension Tap 1-8 x 8" Overall Length Bottom H4 4 Flute TICN Coated Regal Beloit (Extension Tap)

Diameter and Pitch = 1-8

Lead = Bottom {1-2 Thread Lead}

Overall length = 8"

H Limit = H4

Number of Flutes = 4 with a 45 degree right hand helix

Right Hand Cutting

Coating = TICN

Ground Threads

P/N = RBC-0812050014/0119j37B

Undercut on Shank for full Length
Applications = General Purpose Steels.
$65.00
tap sp pt 1-14 brt rbc
Spiral Point Tap 1-14 Plug Lead H3 3 Flute High Speed Steel Uncoated 6" Overall Length Regal Beloit (Spiral Point Tap Fractional)

Diameter and Pitch = 1-14

Lead = Spiral Point Plug {3-5 Thread Lead}

H Limit = H3

Number of Flutes = 3 Which are Straight

Right Hand Cutting

Coating = Uncoated - Bright

Ground Threads

Manufacturer = Regal

P/N RBC-0S17647001

Applications = Used for hand and machine tapping in both thru or blind holes in a variety of materials. This style tap generally used in thru holes, or holes that have enough clearance at bottom to accommodate the chip. Spiral point Taps are free cutting reducing torque required.
$58.00
Per Page      1 - 37 of 37
  • 1